Carrying and storing your 18650 lithium-ion batteries has never been easier with the Nitecore NBM40 battery holder. It can comfortably store four 18650 batteries, which are simply just pushed into the flexible storage holes. The environmentally friendly vapour-phase gum material makes it easy to get your batteries in and out of the carrier, yet it is also strong and durable.
These handy Nitecore filters are designed for the Nitecore EA1, EA2, EC1, EA11, EA21, EC1, EC11, EC20, EC21, EC23, MH1A, MH1C, MH2A, MH2C, MH10/V2/S, MH12/V2/S/GT, SRT3, SRT5, P05, P10/V2/GT, P12/GT, NEW P12, MT1U, MT2C, MT10A, MT10C, MT20A & MT20C or any torch with a head diameter of 25.4 mm.
These handy Nitecore filters are designed for the Nitecore SRT7, SRT7GT, SRT9, P15, P16, P16 Tactical, P25, EA4, EA41, EC4GT, EC4S, EF1, TM03, MH25, MH25GT, MH27, MH27UV, R40, CG6, CB6, CR6, CU6, CI6 and CI7, or any torch with a head diameter of 40 mm.
These handy Nitecore filters are designed for the Nitecore MT40, MT40GT, TM06, TM06S and P30 or any torch with a head diameter of 50 mm and are available in red or green.
The NTW25 traffic wand is designed for the Nitecore EA1, EA2, EC1, EC2 or MT2C and it is made from PC2805 high-grade plastic. They can be fitted to any torch with a head diameter of 25.4mm.
A set of four Unilite helmet clips to fit on your head torch strap. These clips enable you to clip the head torch strap to your helmet and stop the straps slipping up the side of the helmet, a very useful item!
A set of 4 large helmet clips to fit on your head torch strap. These clips enable you to clip the head torch strap to your helmet and stop the straps slipping up the side of the helmet, a very useful item!
The Nitecore remote pressure switch is designed for several torches from the Nitecore range and once connected, it allows the torch to be operated by using the pressure pad switch.
The Nitecore RSW2D remote pressure switch is designed for the Nitecore P12GTS, MH12GTS and MH25GTS, or Nitecore torches with a 26 mm tail diameter and a double layered tube.
The GM02 is machined to perfection from aircraft grade aluminum alloy and is hard anodised for durability. Compatible with the following Nitecore torches; The Precise series, the Chameleon series, SRT7, SRT6, MT2C, MT25, MT26, MT40, MH2C, MH25, MH27 and MH40. Also compatible with any torch barrels with 25.4 mm (1 inch) diameter.
The Nitecore HRM2 helmet mount is designed to attach torches with a body diameter of 25.4 mm (1 inch) to a helmet or hard hat, and it fits most helmets and hardhats up to 12 mm thickness.
The Nitecore NCP30 is a durable, multi-functional holster that is ideal for carrying torches and multi-tools. The holster also offers a small side compartment for carrying tactical pens and penlights. It is compatible with the following Nitecore models: EA21, EC20, EC25, MT25, MT2C, MT20C, MT06 (elastic side pocket), P20, P20UV, P10, P12, SRT5, MH2C, MH10, MH12.
The Nitecore NCP40 is a durable, multi-functional holster that is ideal for carrying torches and multi-tools. The holster also offers a small side compartment for carrying tactical pens and penlights. It is compatible with the following Nitecore models: EA41, EC4, EC4S, EC4SW, EC4GT, MH25, MH25GT, MH27, MH27UV, SRT7, P25, P16, P15, CR6, CU6, CI6, CB6, CG6, R40, TM03, EF1.
Carrying your Nitecore Tiny Monster just got a whole lot easier! Specially designed for the Nitecore TM series, this handle mount provides a comfortable alternative way to carry round your torch. Compatible with the TM06, TM11, TM15, TM26 and TM36.
The Nitecore TSL10i is a tail cap featuring a built in multi coloured signal light that is ideally suited to signalling and visibility purposes, and is designed for the Nitecore i-Generation torches only.
To prevent short circuiting, do not use this charger with batteries that have a positive and negative terminal at the same end of the battery, such as the Olight tailored batteries.
The Nitecore LC10 USB magnetic battery charger is designed to easily charge a variety of 3.6 V and 3.7 V Lithium-ion/IMR type batteries and also functions as a power bank. The two circular magnetic charging contacts are attached to either side of the battery and the other end of the cable is inserted into a USB power source.
This Nitecore VCL10 is what has been missing from your car. It is a multi-functional unit with it's primary use being an in car USB charging adaptor to easily charge USB devices while on the go and away from home.