Home Special Purpose Hazard Lights NightSearcher Pulsar NavStar Sequential Rechargeable Signal Lights (Set of 10)
NightSearcher  |  SKU: NSPULSARNAVSTAR

NightSearcher Pulsar NavStar Sequential Rechargeable Signal Lights (Set of 10)

£329.94 £487.14

The NightSearcher NavStar Pulsar is a rechargeable, fast-deployment hazard warning set of 10 lights, housed in a portable carry case that also functions as the charging system.

The NavStar Pulsars provide 360° illumination, visible from up to 1 km away, making them ideal for emergency service personnel. Additionally, they emit a vertical beam, perfect for drone and helicopter operations. The automatic switch-on and flash mode allow hazardous situations to be secured as quickly and safely as possible.

They can be placed directly on the ground or secured to metal structures or vehicles with their built-in high strength magnets.

To activate, remove a NavStar Pulsar from the charging case and place it on the ground. An amber light will appear, and the NavStar Pulsar will begin flashing. Lay the remaining NavStar Pulsars on the ground, and they will automatically synchronise with the flashing mode of the first NavStar Pulsar. The colour and flashing modes can be adjusted on each individual NavStar Pulsar. Press the round button to cycle through the six flashing modes and the square button to switch between the colour modes of blue, amber, and red. The NavStar Pulsars will not turn off until they are returned to the charging case.

Once all NavStar Pulsars are set to the desired flashing and colour mode, place them back into the pockets of the carry case, ensuring the magnet faces down and the cluster of four LEDs faces up. The NavStar Pulsars are held securely in place by the magnet and are ready for charging.

To charge the NavStar Pulsars, connect the charging lead to the socket and plug the charger into a suitable power supply. The indicator will show red while charging is in progress and turn green when fully charged. Once charging is complete, fold the case back.

To reset the NavStar Pulsars, remove them all from the carry case. Switch them off by pressing and holding the round button. Once off, on one NavStar Pulsar, press and hold the square button for approximately 30 seconds. A red and amber LED will flash inside the unit. Repeat this process for each additional NavStar Pulsar, pressing and holding the square button for approximately 30 seconds on each one. The red and amber LEDs will flash briefly. Continue this for the entire set; the original NavStar Pulsar will continue flashing throughout the process. After all units have been reprogrammed, press the square button on the original unit. The red and amber LED will turn off; then, release the button and return the NavStar Pulsar to the carry case.

The Navstar Pulsar has an IP rating of IPX8 and is crush proof up to 3 tonnes making it the perfect tool in an emergency.

Product Features

Charge carry case
Automatic switch on
360° illumination
Colour and flashing modes

Operational Modes

Red Constant: 3 lumens; 10 hours run-time
Red Flashing: 3 lumens; 50 hours run-time
Green Constant: 8 lumens; 11 hours run-time
Green Flashing: 8 lumens; 50 hours run-time
Yellow Constant: 9 lumens; 11 hours run-time
Yellow Flashing: 9 lumens; 50 hours run-time
White Constant: 15 lumens; 7 hours run-time
White Flashing: 15 lumens; 40 hours run-time
Blue Constant: 2 lumens; 6 hours run-time
Blue Flashing: 2 lumens; 40 hours run-time
Red and Blue Flashing: 40 hours run-time


Technical Details

Type: Versatile LED torch
Operating Modes: Red Constant & Flash / Green Constant & Flash / Yellow Constant & Flash / Blue Constant & Flash / White Constant & Flash / Red and Blue Flash
Luminous Flux: Up to 15 lumens (white flash)
Batteries Required: Built-in 750 mAh 3.7 lithium-ion battery
Measurements: 350 mm x 150 mm x 335 mm
Weight: 5 kg (case and lights)
Body Colour: Translucent
Body Material: Durable and sturdy PC material
Switch Type: Push button
Crush Proof: Up to 3 tonnes
Environmental: IPX8


Packaging and Contents

Supplied in retail packaging and includes:
NightSearcher Pulsar NavStar x 1
12 V and 24 V DC vehicle charger x 1
AC charger x 1
Manual x 1


Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
NightSearcher Pulsar NavStar Sequential Rechargeable Signal Lights (Set of 10)
NightSearcher

NightSearcher Pulsar NavStar Sequential Rechargeable Signal Lights (Set of 10)

£329.94 £487.14

The NightSearcher NavStar Pulsar is a rechargeable, fast-deployment hazard warning set of 10 lights, housed in a portable carry case that also functions as the charging system.

The NavStar Pulsars provide 360° illumination, visible from up to 1 km away, making them ideal for emergency service personnel. Additionally, they emit a vertical beam, perfect for drone and helicopter operations. The automatic switch-on and flash mode allow hazardous situations to be secured as quickly and safely as possible.

They can be placed directly on the ground or secured to metal structures or vehicles with their built-in high strength magnets.

To activate, remove a NavStar Pulsar from the charging case and place it on the ground. An amber light will appear, and the NavStar Pulsar will begin flashing. Lay the remaining NavStar Pulsars on the ground, and they will automatically synchronise with the flashing mode of the first NavStar Pulsar. The colour and flashing modes can be adjusted on each individual NavStar Pulsar. Press the round button to cycle through the six flashing modes and the square button to switch between the colour modes of blue, amber, and red. The NavStar Pulsars will not turn off until they are returned to the charging case.

Once all NavStar Pulsars are set to the desired flashing and colour mode, place them back into the pockets of the carry case, ensuring the magnet faces down and the cluster of four LEDs faces up. The NavStar Pulsars are held securely in place by the magnet and are ready for charging.

To charge the NavStar Pulsars, connect the charging lead to the socket and plug the charger into a suitable power supply. The indicator will show red while charging is in progress and turn green when fully charged. Once charging is complete, fold the case back.

To reset the NavStar Pulsars, remove them all from the carry case. Switch them off by pressing and holding the round button. Once off, on one NavStar Pulsar, press and hold the square button for approximately 30 seconds. A red and amber LED will flash inside the unit. Repeat this process for each additional NavStar Pulsar, pressing and holding the square button for approximately 30 seconds on each one. The red and amber LEDs will flash briefly. Continue this for the entire set; the original NavStar Pulsar will continue flashing throughout the process. After all units have been reprogrammed, press the square button on the original unit. The red and amber LED will turn off; then, release the button and return the NavStar Pulsar to the carry case.

The Navstar Pulsar has an IP rating of IPX8 and is crush proof up to 3 tonnes making it the perfect tool in an emergency.

Product Features

Charge carry case
Automatic switch on
360° illumination
Colour and flashing modes

Operational Modes

Red Constant: 3 lumens; 10 hours run-time
Red Flashing: 3 lumens; 50 hours run-time
Green Constant: 8 lumens; 11 hours run-time
Green Flashing: 8 lumens; 50 hours run-time
Yellow Constant: 9 lumens; 11 hours run-time
Yellow Flashing: 9 lumens; 50 hours run-time
White Constant: 15 lumens; 7 hours run-time
White Flashing: 15 lumens; 40 hours run-time
Blue Constant: 2 lumens; 6 hours run-time
Blue Flashing: 2 lumens; 40 hours run-time
Red and Blue Flashing: 40 hours run-time


Technical Details

Type: Versatile LED torch
Operating Modes: Red Constant & Flash / Green Constant & Flash / Yellow Constant & Flash / Blue Constant & Flash / White Constant & Flash / Red and Blue Flash
Luminous Flux: Up to 15 lumens (white flash)
Batteries Required: Built-in 750 mAh 3.7 lithium-ion battery
Measurements: 350 mm x 150 mm x 335 mm
Weight: 5 kg (case and lights)
Body Colour: Translucent
Body Material: Durable and sturdy PC material
Switch Type: Push button
Crush Proof: Up to 3 tonnes
Environmental: IPX8


Packaging and Contents

Supplied in retail packaging and includes:
NightSearcher Pulsar NavStar x 1
12 V and 24 V DC vehicle charger x 1
AC charger x 1
Manual x 1

View product