Free Gift Offer!

Spend over £100 and receive a free NEBO Plasma Lighter

Home Torches Handheld Torches Nitecore MT2C Pro LED Torch
Nitecore  |  SKU: MT2C-PRO

Nitecore MT2C Pro LED Torch

£63.90

The Nitecore MT2C Pro is part of the Multi-Task series of lights, which offer incredible performance, featuring a 1800 lumen output and multiple power options.

The MT2C Pro utilises a UHi LED which offers ultra high light density and high beam intensity. Useful design features include a pocket clip, anti-roll head, and tail stand capability for use as a candle.

The MT2C Pro is powered by the included NL1836R 3600 mAh lithium-ion battery, which is charged outside the torch via the USB-C port. Simply connect the included USB-C charging cable to the port on the battery and the other end to a suitable USB power source and charging will begin immediately. The indicator on the battery will turn red while charging is in progress and green once charging is complete after approximately 4 hours.

Alternatively the MT2C Pro can be powered by either two CR123A lithium metal batteries or two RCR123 lithium-ion batteries for back-up power or in emergencies. These offer slightly reduced high outputs and run-times, please note that a CR123A lithium metal battery is a primary cell and cannot be recharged.

The MT2C Pro features tactical momentary illumination. Half-press and hold the power button to momentarily access the high output. Release the button to turn the torch off, then half-press and hold again to access the momentary low output. Do this within two seconds, or the next half-press and hold will access the high output again. For constant on outputs, fully press the power button to access the high output. Turn the torch off by pressing the button again, and within two seconds, press the button to access the low output. Do this within two seconds, or the next press will access the high output again.

Operational Modes

Using the NL1836R lithium-ion battery:
High: 1800 lumens; 2 hours, 15 minutes run-time; 520 m beam range
Low: 50 lumens; 28 hours run-time; 95 m beam range

Using 2 x RCR123 batteries:
High: 800 lumens; 1 hours 30 minutes run-time; 350 m beam range
Low: 50 lumens; 12 hours run-time; 95 m beam range

Using 2 x CR123 batteries:
High: 800 lumens; 2 hours 45 minutes run-time; 350 m beam range
Low: 50 lumens; 20 hours run-time; 95 m beam range

Note: Accurate ANSI performance numbers indicate real world light output and run times when using one 3600 mAh 18650 lithium-ion battery. The data is approximate and may vary between torches, batteries and environments.


Technical Details

Type: Hand held LED torch
Operating Modes: High / Low
Luminous Flux: Up to 1800 lumens
Lamp Type: UHi 20 LED
Beam Range: 520 m
Batteries Required: 1 x NL1836R 1600 mAh lithium-ion / 2 x CR123A / 2 x RCR123
Overall Length: 117.5 mm
Head Diameter: 26.8 mm
Barrel Diameter: 21.4 mm
Weight: 64 grams
Colours Available: Black
Body Material: Aerospace grade aluminium alloy
Body Finish: HA III military grade hard anodised
Lens: Optical with precision digital optics technology
Switch Type: End cap push button
Impact Resistance: 1 m
Environmental: IPX8
Warranty:  years


Packaging and Contents

Supplied in retail packaging and includes:
Nitecore MT2C Pro LED torch x 1
Nitecore NL1836R 3600 mAh lithium-ion rechargeable battery x 1
USB-C charging cable x 1
Lanyard x 1
Spare O-ring x 1
Manual x 1


Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
Nitecore MT2C Pro LED Torch
Nitecore

Nitecore MT2C Pro LED Torch

£63.90

The Nitecore MT2C Pro is part of the Multi-Task series of lights, which offer incredible performance, featuring a 1800 lumen output and multiple power options.

The MT2C Pro utilises a UHi LED which offers ultra high light density and high beam intensity. Useful design features include a pocket clip, anti-roll head, and tail stand capability for use as a candle.

The MT2C Pro is powered by the included NL1836R 3600 mAh lithium-ion battery, which is charged outside the torch via the USB-C port. Simply connect the included USB-C charging cable to the port on the battery and the other end to a suitable USB power source and charging will begin immediately. The indicator on the battery will turn red while charging is in progress and green once charging is complete after approximately 4 hours.

Alternatively the MT2C Pro can be powered by either two CR123A lithium metal batteries or two RCR123 lithium-ion batteries for back-up power or in emergencies. These offer slightly reduced high outputs and run-times, please note that a CR123A lithium metal battery is a primary cell and cannot be recharged.

The MT2C Pro features tactical momentary illumination. Half-press and hold the power button to momentarily access the high output. Release the button to turn the torch off, then half-press and hold again to access the momentary low output. Do this within two seconds, or the next half-press and hold will access the high output again. For constant on outputs, fully press the power button to access the high output. Turn the torch off by pressing the button again, and within two seconds, press the button to access the low output. Do this within two seconds, or the next press will access the high output again.

Operational Modes

Using the NL1836R lithium-ion battery:
High: 1800 lumens; 2 hours, 15 minutes run-time; 520 m beam range
Low: 50 lumens; 28 hours run-time; 95 m beam range

Using 2 x RCR123 batteries:
High: 800 lumens; 1 hours 30 minutes run-time; 350 m beam range
Low: 50 lumens; 12 hours run-time; 95 m beam range

Using 2 x CR123 batteries:
High: 800 lumens; 2 hours 45 minutes run-time; 350 m beam range
Low: 50 lumens; 20 hours run-time; 95 m beam range

Note: Accurate ANSI performance numbers indicate real world light output and run times when using one 3600 mAh 18650 lithium-ion battery. The data is approximate and may vary between torches, batteries and environments.


Technical Details

Type: Hand held LED torch
Operating Modes: High / Low
Luminous Flux: Up to 1800 lumens
Lamp Type: UHi 20 LED
Beam Range: 520 m
Batteries Required: 1 x NL1836R 1600 mAh lithium-ion / 2 x CR123A / 2 x RCR123
Overall Length: 117.5 mm
Head Diameter: 26.8 mm
Barrel Diameter: 21.4 mm
Weight: 64 grams
Colours Available: Black
Body Material: Aerospace grade aluminium alloy
Body Finish: HA III military grade hard anodised
Lens: Optical with precision digital optics technology
Switch Type: End cap push button
Impact Resistance: 1 m
Environmental: IPX8
Warranty:  years


Packaging and Contents

Supplied in retail packaging and includes:
Nitecore MT2C Pro LED torch x 1
Nitecore NL1836R 3600 mAh lithium-ion rechargeable battery x 1
USB-C charging cable x 1
Lanyard x 1
Spare O-ring x 1
Manual x 1

View product