Olight LED Hand Torches

The new Olight i3E EOS uses a high performance Philips Luxeon TX LED, which gives a maximum output of 90 lumens. Powered by a single AAA alkaline battery (included) or a single NiMH rechargeable battery, it has a maximum run-time of 1 hour, 10 minutes when using a NiMH battery.

The Olight S1 Baton is the smallest side switch LED torch ever produced by Olight. It uses one CR123A primary lithium cell which is included, or can use one RCR123 rechargeable lithium-ion battery. The S1 Baton outputs an intensely bright beam of 500 lumens at maximum setting with its Cree XM-L2 CW LED, and has a maximum beam distance of 110 metres.

The Olight S1 Mini Baton HCRI has a higher colour rendition than the standard S1 Mini and a slightly lower lumen output of 450 lumens output on the turbo setting, before dropping down to 250 lumens after 1 minute to prevent the LED from overheating. Utilising a Cree XP-G3 CW LED the S1 Mini HCRI produces cool white light with a colour temperature of 5500 k and 90 CRI, while the TIR reflector gives a broad beam with a wide yet defined hotspot, which is perfect for up close illumination and can throw the beam a maximum of 70 metres range.

The Olight S1 Mini Baton is the smallest in the baton series and is capable of 600 lumens output on the turbo setting, before dropping down to 330 lumens after 1 minute to prevent the LED from overheating. Utilising a Cree XM-L2 LED the S1 Mini produces cool white light with a colour temperature of 6500 k and 70 CRI, while the TIR reflector gives a broad beam with a wide yet defined hotspot which is perfect for up close illumination and can throw the beam a maximum of 130 metres range.

The Olight S2 Baton outputs an intensely bright beam of 950 lumens at maximum setting with its Cree XM-L2 CW LED, and has a maximum beam distance of 142 metres.

The Olight i1R EOS is a tiny rechargeable key ring torch and is capable of 130 lumens output on the high setting. The Luxeon TX LED combined with an TIR optic lens produces a soft beam with a wide hotspot for a good coverage of light and can reach up to a maximum of 54 metres beam range.

The Olight i3T EOS is a slim, single tail switch hand torch and is capable of 180 lumens output on the high setting using a AAA alkaline battery (included). The Luxeon TX LED combined with an TIR optic lens produces a soft and balanced beam for a good coverage of light.

The Olight M1T Raider is a single tail switch tactical hand torch and is capable of 500 lumens output on the high setting. The output drops down to 300 lumens after 5 minutes constant use to prevent the LED from overheating.

The Olight M2R Warrior is a rechargeable dual switch tactical hand torch and is capable of 1500 lumens output on the highest turbo setting, before dropping down to 700 lumens after 3 minutes to prevent the LED from overheating. The Cree XHP35 LED combined with an orange peel reflector produces a central hot spot with an even spill beam for a good coverage of light and can reach up to a maximum of 208 metres beam range.

The Olight M2T Warrior is a dual switch tactical hand torch and is capable of 1200 lumens output on the highest turbo setting when using a 18650 lithium-ion rechargeable battery, or 900 lumens when using two CR123A non-rechargeable batteries. With either battery the output drops down to 600 lumens after 3 minutes to prevent the LED from overheating.

The Olight S2R Baton II is an upgraded version of the popular S2R Baton, now with a 5 mm shorter body for a more compact design and also a higher maximum output of 1150 lumens, before dropping down to 400 lumens after 2 minutes to prevent the LED from overheating.

The Olight S30R III Baton is the third torch in the S30R Baton series and now offers a maximum output of 1050 lumens. It features the latest Cree XM-L2 LED and has Olights signature blue accents on the push button side switch and on the bezel of the torch.

The M1X Striker is a variation of the M18 Striker, offering more brightness levels and increased lumen output. Pressing the tail-cap switch on will activate the torch at the last brightness setting used, while the momentary function is accessed with a half press. The tail-cap also accesses moonlight mode and gives instant access to high and strobe.

Olight have updated one of their most popular models, the M20SX to be even brighter and more reliable than before! The new model features high quality materials and manufacturing as well as the unique feature of a de-domed Cree LED that has a maximum output of 820 Lumens.

The kit includes the following main items: M20SX Javelot RM20S pressure switch X-WM02 gun mount Red, green and blue filters.

The Olight M23 Javelot is a tactical LED torch with a high intensity ouptut of 1020 lumens from it's Cree XP-L LED. Featuring a stainless steel bezel, the M23 has a tail conductive structure that makes it more stable, durable and impact resistant.

The Olight Warrior X is a rechargeable tactical torch and is a successor to the popular M22 and M23 torches, offering a similar body design as the M22 and M23 but in a more compact size and with better, deeper cut heat sinking fins for better temperature management due to the higher output.

The Olight M2X-UT Javelot is a portable, extended-range LED torch with a beam that reaches out to 810 metres. With its customised Cree XM-L2 LED, the M2X-UT Javelot delivers a tightly focused 1020 lumen beam, making it ideal for long-range uses. It has three brightness levels from 20 to 1020 lumens, plus a strobe mode. It’s powerful enough to reach extreme distances, but small enough for everyday carry.

The Olight M3XS-UT Javelot is the big brother to the M3X Triton, offering the same maximum output of 1200 lumens, but boasting an amazing 1000 metres beam range. The M3XS-UT can be powered by three CR123A primary lithium battery cells or, with the extender tube fitted, it can be powered by either four CR123A primary lithium batteries or two 18650 lithium-ion rechargeable battery cells.

The Olight R20 Javelot is equipped with the latest and greatest Cree XP-L HI LED and produces 900 lumens on High, with a beam range of 314 metres. The multi-function tail cap switch allows for On/Off activation, and cycles through the brightness settings in the order of high, mid, low, high with half presses of the button when turned on.

The Olight R50 Pro Seeker LE Kit (law enforcement) is a high output, compact rechargeable LED torch that is capable of producing a staggering 3200 lumens output on the highest setting.

The Olight R50 Pro Seeker is a high output, compact rechargeable LED torch that is capable of producing a staggering 3200 lumens output on the highest setting. Featuring a Cree XHP70 LED, the R50 Pro combines this with an orange peel reflector and a slightly concave, coated lens to create a balance of concentrated spot and a broad beam, offering a maximum range of 250 metres.

The Olight Seeker 2 Pro is a high output rechargeable LED torch that is the successor to the R50 Seeker series and now is even more compact and slimline but still punches the same power of a staggering 3200 lumens output on the highest setting.

The Olight R50 Seeker is a compact rechargeable LED torch that produces an impressive 2500 lumens on the highest setting. Featuring a Cree XLamp XHP50 LED, the R50 combines this with an orange peel reflector for the perfect light combination of distance and width, offering a maximum beam range of 297 metres.

The Olight S2A Baton is equipped with a Cree XM-L2 LED and produces 550 lumens output on the highest setting. The side switch cycles through the brightness settings in the order of low, mid, high, turbo by holding down the button when the torch is turned on. Moonlight brightness level is also available by holding the button down for one second when the torch is off.

The Olight PL-2 Valkyrie is a versatile LED weaponlight that features a Cree XHP35 HI LED that produces 1200 lumens of white light. As this is a high drain device, the temperature regulation will automatically drop the brightness to 600 lumens after 1.5 minutes to protect the LED. A swing arm mechanism located on the edge of the gun mount opens up, allowing you to easily attach and detach the torch to the gun rail.

The Olight PL-2RL Baldr is a versatile LED weapon light that is a variant on the popular PL-2 Valkyrie and features the same Cree XHP35 HI LED that produces 1200 lumens of white light, but this torch also features a red laser.

The Olight PL-MINI 2 Valkyrie is the new and improved version of the PL-MINI Valkyrie. It offers an even more compact design than before, now with a smaller rail adaptor making it compatible with a wider range of firearms and also smaller firearms that have a very short rail.

The Olight PL-MINI Valkyrie is a compact LED weapon light that features a Cree XP-L HI LED that produces 400 lumens of white light. The lightweight design means the balance of the handgun isn't disrupted and the small size makes it perfect for holster carry.

The SR52 UT Intimidator is the successor to the hugely popular Olight SR52 Intimidator, offering a greater beam range of 800 metres. Featuring the latest Cree XP-L HI cool white LED, the SR52 UT has three brightness levels with a maximum output mode of 1100 lumens and a strobe mode available.

The Olight X7R Marauder is a compact, super powerful and rechargeable torch that is capable of a jaw dropping 12000 lumens output in turbo S mode, before dropping down to 3000 lumens after 3 minutes to prevent the LED from overheating. Three Cree XHP70 LEDs give the X7R the capability to produce 12000 lumens, but not without the help of the four high drain 18650 lithium-ion rechargeable batteries that are built into the torch

The X9R Marauder is the largest and brightest torch Olight have ever produced and it is the most powerful torch that we have on the website. This powerhouse offers a mega jaw dropping 25000 lumens output on the highest level, before dropping down to 6400 lumens after 3 minutes to prevent the LEDs from overheating.

The Olight S1R Baton II is an upgraded version of the popular S1R Baton and still has the same compact design but now offers 1000 lumens output on the highest setting, before dropping down to 300 lumens after 1 minute, 30 seconds to prevent the LED from overheating.