Olight Seeker 4 Pro Rechargeable LED Torch
Olight Seeker 4 Pro Rechargeable LED Torch is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
The Olight Seeker 4 Pro is the latest addition to the Seeker range with a powerful output of up to 4600 lumens. Perfect for hiking, camping or even patrol.
The multi-function side-switch turns the torch on and off, to cycle through the low, mid and high outputs, press and hold the button while the torch is on and release on the desired output. Or simply use the rotary switch, which sits around the push switch, for stepless mode changing. Turn the switch clockwise to cycle to the highest output and anti-clockwise to cycle through to the lowest output. The brightness indicator on the left of the torch will flash when the highest or lowest output has been reached. For turbo access, double click the button and a triple click enters strobe. Moonlight mode can be accessed by holding the button down while the light is off. To prevent overheating the Seeker 4 will maintain the turbo and high outputs for a reduced amount of time before dropping down to a lower output to protect the LED.
When the light is turned on the battery level indicator on the right of the button will illuminate. Four indicators show 75% or above, three show 75-50%, two show 50-25% and one green indicator means 25-10% while one red indicators means less than 10% and the torch should be charged.
The Seeker 4 features a lock-out function, so you don't have to worry about accidentally activating the light in your pocket or bag, and is activated by holding down the button for over 2 seconds while the light is turned off. To turn the torch on again, either press and hold the button for at least one second or turn the rotary switch more than 90°. The torch will automatically enter the lockout mode when off with over ten seconds of inactivity.
A built in memory function automatically returns to your last brightness level from the off position (turbo will be memorised as high mode, the high mode will be memorised for 1 minute before reverting back to mid and the strobe cannot be memorised).
It is powered using the included Olight 21700, 5000 mAh customised lithium-ion battery, which is recharged inside the torch using the included USB-C charging cable. Insert the USB-C into the port and connect the other end to a suitable USB power source. Or alternatively the Seeker 4 Pro is compatible with the Olight MCC3 magnetic charger (not included). The indicator light will turn red while charging is in progress and turn green once charging is complete after approximately hours.
Two timer settings are on the Seeker 4; long timer (9 minutes) and short timer (3 minutes). Double click and hold the side switch while the light is on to enter this setting. One blink indicates the 3 minutes mode, and two blinks indicates the 9 minutes mode.
The included holster offers versatile carrying options and can even act as a charging dock when used with the included bracket. The Seeker 4 Pro will automatically unlock when removed from the holster, ready to use instantly.
Lock-out function to prevent accidental activation
Memory function remembers last mode used
Battery status indicator and output indicator
Ergonomic wrap around grip
Stepless rotary switch
4600 lumens; 2.5 minutes run-time; 260 m beam range
1200 lumens; 122 minutes run-time
600 lumens; 35 minutes run-time
1200 lumens; 135 minutes run-time; 130 m beam range
600 lumens; 35 minutes run-time
300 lumens; 10 minutes run-time
Mid: 300 lumens; 11 hours run-time; 65 m beam range
Low: 50 lumens; 60 hours run-time; 25 m beam range
Moon: 5 lumens; 15 days run-time; 9 m beam range
The above data is measured indoors under 25°C in windless laboratory conditions. The data may vary due to environmental and heat dissipation conditions.
Please note: *The turbo & high settings will reduce in output to protect the LEDs from overheating, and will continue to decrease as the battery voltage decreases.
Type: Rechargeable hand LED torch
Operating Modes: Moonlight / Low / Mid / High / Turbo / Strobe
Luminous Flux: Up to 4600 lumens
Lamp Type: High performance cool white LED
Reflector System: TIR optic
Beam Range: Up to 260 m
Batteries Required: customised 21700, 5000 mAh lithium- ion 3.6V
Overall Length: 133 mm
Head Diameter: 35 mm
Weight: 205 grams (including battery)
Body Colour: Black
Body Material: Aluminium alloy
Switch Type: Single side push-button switch
Impact Resistance: 1.5 m
Warranty: 5 years (torch), 1 year (battery)
Packaging and Contents
Supplied in retail packaging and includes:
Olight Seeker 4 Pro rechargeable LED torch x 1
USB-C charging cable x 1
Vertical holster x 1
Holster fixing bracket x 1
Plastic expansion screws x 1
Manual x 1
Top quality, can’t go wrong.