Home Torches Key Ring Torches Nitecore TINI 3 Rechargeable LED Key Ring Torch
Nitecore  |  SKU: TINI3-BLK

Nitecore TINI 3 Rechargeable LED Key Ring Torch

£37.98 £39.90
Body Colour: Black

The latest generation in the TINI series is the TINI 3, which features the innovative 8-core multiple colour temperature (MCT) UHE LEDs, offering 3 colour temperature options of cool, neutral or warm white light.

The OLED display provides information about the current status of the TINI 3 when the light is turned on. It successively shows the brightness level, lumen output and the run-time remaining. After the screen goes out it can be reactivated by pressing the mode button.

The operational buttons comprise of a power button and a mode button. The power button turns the TINI 3 on with a short press and then the mode button cycles through ultra-low, low, mid and high with each press. The last used brightness level will be memorised. The colour temperature can be changed by holding down both buttons and releasing on the desired CT.

Turbo is accessed with the light on or off by holding the mode button down and is a momentary function that will return to the previous state once the mode button is released. Ultra-low can be instantly accessed while the light is off by holding down the power button.

To prevent accidental activation, the TINI 3 has two lockout modes. Semi lockout disables the use of the power button, however you can still hold down the mode button to access turbo should you still need partial access to light in an emergency. Full lockout mode disables all output functions. Please see the manual for full operational functions.

It is powered by a built-in 330 mAh lithium-ion rechargeable battery which is recharged via the USB-C charging port located on the side of the torch (USB-C cable not included). The screen will display battery status while charging is in progress and once charging is complete after approximately 1 hour, 30 minutes (5V, 2A adaptor) the screen will display a full battery icon.

Remaining battery power is indicated by pressing the mode switch while the TINI 3 is turned off (in unlocked mode) and the OLED screen will display the battery level icon, the percentage of remaining battery level and the memorised brightness level.

The advanced temperature regulation module allows the TINI 3 to regulate its output and adapt to the ambient environment to maintain optimal performance.

An included carabiner key ring allows you to easily attach the torch to your keys or a bag strap so that it is always on hand, or you can pop it in a bag or pocket ensuring that it is in lockout mode for safety.

Product Features

Built-in rechargeable lithium-ion battery with USB-C fast charging
Integrated intelligent Li-ion battery charging circuit
Dual switch design with direct access to turbo & ultra-low
Features five brightness levels
Advanced temperature regulation
Rear suspension ring for key ring attachment
Lightweight, compact and portable
Advanced power cut-off technology for ultra-low standby power consumption

Operational Modes

Turbo: 600 lumens; 90 m beam range*
High: 200 lumens; 1 hour run-time; 56 m beam range
Mid: 65 lumens; 2 hours, 45 minutes run-time; 32 m beam range
Low: 15 lumens; 9 hours run-time; 14 m beam range
ultra-low: 1 lumen; 85 hours run-time; 6 m beam range

Data measured using the built-in lithium-ion battery (330 mAh) under laboratory conditions. The data may vary in real world use due to different environmental conditions.

Note: *Turbo mode is a manually operated momentary function and the run-time is tested without temperature regulation active.


Technical Details

Type: Key ring LED torch
Operating Modes: Turbo / High / Mid / Low / ultra-low
Luminous Flux: Up to 600 lumens
Colour Temperature: Warm (3000 K) / Neutral (4500K) / Cool (6500 K)
Beam Range: Up to 90 m
Lamp Type: 8-core MCT UHE LEDs
Batteries Required: Built-in 330 mAh lithium-ion battery
Measurements: 47.2 mm x 25.4 mm x 14 mm
Weight: 20 grams
Body Colour: Black, grey or orange
Body Material: High strength aluminium alloy
Body Finish: HA III hard anodised finish
Environmental: Dust and water resistant to IP54 standard
Impact Resistance: 2 m
Warranty: 2 years


Packaging and Contents

Supplied in retail packaging and includes:
Nitecore TINI 3 LED key ring torch x 1
Key ring attachment x 1
Manual x 1


Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)