Olight Array 2 Pro Rechargeable LED Head Torch
Olight Array 2 Pro Rechargeable LED Head Torch is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
The Olight Array 2 Pro is an updated version of the popular Array 2, now with a higher white output, sensor operation as well as button control, and a front red LED output.
The head torch utilises a cool white spot LED and a cool white flood LED combined to give a maximum output of 1500 lumens. The flood LED is a close range diffused soft light while the spot LED provides a central hotspot, so combined they produce a balanced all round beam profile of near and far lighting (beams are used together or in just flood, the spot cannot be operated separately).
A push button switch is located on top of the headlamp, controlling the three outputs, three modes and SOS. A single press will turn the light on in the last used mode (except SOS). Once turned on the brightness level in the current mode can be changed by holding down the button and will cycle low, mid, high until the button is released on the desired output. To change modes, double press the button with the light on to cycle through spot + flood combined, flood and red. In the unlocked state, a quick triple press will activate SOS and a single press will turn the light off when in any mode.
Some functions can also be controlled using the hand wave sensor, which has a sensing distance of 5 cm. To turn off the spot LED and use in flood mode wave your hand left across the front, or wave your hand the right to turn the spot back on and use in combined mode. The brightness level can also be changed by waving your hand down to decrease the output, or waving your hand up to increase the output. The sensor cannot control the red mode, SOS or turn the torch on on/off.
To prevent accidental activation when not in use or stowed in a bag, the Array 2 Pro has a lockout function. With the light off, press and hold the button for over 1 second to enter the lockout mode, and repeat to exit the lockout mode.
A built-in 3350 mAh lithium-ion battery pack powers the torch, which sits on the back of the headband, and charges via the USB-C port. Remove the dust cover from the back of the battery pack to connect the included cable to the USB-C port and then plug the USB-A end into a USB power source with an output of 1 A. The indicator on the battery pack will flow red to show charging is in progress and turn solid once charging is complete, after approximately 5 hours.
The red LED charging indicator lights along the battery pack also act as a battery level indicator when the light is first turned on, as well as a safety tail light. Each two LED sections represent a third of battery charge, so when the torch is turned on either one, to or three sections will light up to show the power level. After 3 seconds it will stop displaying the battery level and the flashing tail light will be activated.
The tail light flashes red and increases safety by providing extra visibility to others that may be behind you, which is especially useful if out running or walking in the dark. The taillight only has one mode and cannot be turned off. The head lamp can be rotated within a 60° angle so that the light can be directed where you need it most.
It is a lightweight aluminium design that is perfect for a range of activities such as running, camping, fishing, hiking and other general outdoor/indoor activities.
Flood, spot & flood combined and red beam options
USB-C charging port
Rear red safety light
Hand sensor control as well as button control
Lockout function to prevent accidental activation
Spot + Flood Combined
1500 lumens; 2 minutes run-time
380 lumens; 3 hours, 8 minutes run-time
750 lumens; 2 minutes run-time
340 lumens; 3 hours, 40 minutes run-time
210 lumens; 38 minutes run-time
300 lumens; 7 hours, 30 minutes run-time
800 lumens; 2 minutes run-time
320 lumens; 3 hours, 20 minutes run-time
220 lumens; 38 minutes run-time
450 lumens; 2 hours, 50 minutes run-time
280 lumens; 1 hour, 40 minutes run-time
150 lumens; 1 hour run-time
50 lumens; 27 hours, 30 minutes run-time
200 lumens; 2 minutes run-time
110 lumens; 4 hours, 48 minutes run-time
100 lumens; 3 hours, 10 minutes run-time
80 lumens; 2 hours, 50 minutes run-time
45 lumens; 18 hours run-time
Tested to ANSI/NEMA FL1-2009 standards in laboratory conditions using the included 3350 mAh lithium-ion battery. The data may vary slightly in real world use depending on battery type, individual usage habits and environmental factors.
Type: LED head torch
Operating Modes: Flood / Spot + Flood / Red / SOS
Luminous Flux: Up to 600 lumens
Lamp Type: 2 x cool white LEDs, 1 x red LED
Beam Range: Up to 150 m
Batteries Required: Built-in 3350 mAh battery pack
Dimensions: 61 x 31 x 24.5 mm (head lamp)
Weight: 135 grams (including battery pack)
Body Colour: Black
Body Material: Aluminium alloy (unibody structure)
Switch Type: Push button
Impact Resistance: 1 m
Environmental: Waterproof to IPX4 standard
Warranty: 2 years
Packaging and Contents
Supplied in retail packaging and contains:
Olight Array 2 Pro LED head torch and battery pack x 1
USB-C to USB-A charging cable x 1
Manual x 1