Ledlenser Workers Friend 4-in-1 Rechargeable LED Multi-Light

The Ledlenser Workers Friend is an innovative multipurpose LED torch with four lighting attachments fitting one base, perfect for tradespeople and DIY enthusiasts.

The Workers Friend features four bit attachments, making it the perfect tool for any situation. To connect the attachments simply click them into place on the head of the torch base. To remove, pull the neck of the torch down.

Bit 1 is a torch head, perfect for everyday use and features the Ledlenser Advanced Focusing System. Bit 2 is a work light which can be tilted 180 degrees for angled light where you need it. Bit 3 is a flexible gooseneck light for awkwardly angled places and features a focusing head with a magnetic ring, which is perfect for retrieving screws or other small objects in hard to reach places. Bit 4 is a thin flexible inspection light which can be used to inspect hard to reach areas with a small 4.33 mm diameter head.

Powered by a 2500 mAh lithium-ion battery the Workers friend has a battery life of up to 5.5 hours. To charge the torch simply lift the dust cover on the neck of the torch and connect the included micro USB cable to the port. Then connect to a compatible USB-A power source and charging will begin immediately. The indicator around the port will turn res while charging is in progress and green once charging is complete after approximately 5 hours.

To turn the torch on or off with any attachment press the side button on the neck of the torch. The torch will turn on in the low output, the next press will cycle to the high output and then off. Ensure you press the button within 3 seconds or the next press will turn the torch off.

The base of the torch is magnetic for easy hands free use and the Workers Friend is focusable with the torch head and the larger flexible head. Simply push the head of the torch out for the spot light and pull back for the flood light.

Product Features

4-in-1 multitool
USB-C rechargeable
Focusable

Operational Modes

Bit 1 - Torch Head
High: 280 lumens; 2 hours, 30 minutes run-time; 130 m beam range
Low: 140 lumens; 5 hours, 30 minutes run-time; 90 m beam range

Bit 2 - Work Light
High: 350 lumens; 2 hours, 30 minutes run-time; 26 m beam range
Low: 175 lumens; 5 hours run-time; 20 m beam range

Bit 3 - Gooseneck
High: 190 lumens; 5 hours, 30 minutes run-time; 89 m beam range
Low: 100 lumens; 8 hours, 30 minutes run-time; 28 m beam range

Bit 4 - Inspection Light
High: 3 lumens; 40 hours run-time; 4 m beam range
Low: 1.5 lumens; 80 hours run-time; 2.5 m beam range

Please note: All the above specifications are test results base on ANSI/NEMA FL1-2009 Standard. The test are performed using the battery included in the set. The data may vary due to environment, heat dissipation and other factors.

Technical Details

Type: Multi-purpose LED torch
Operating Modes: High / Low
Luminous Flux: Up to 280 lumens
Beam Range: Up to 130 m
Batteries Required: 1 x 18650 lithium-ion battery (included)
Overall Length: 190 mm (defocused)
Bezel Diameter: 35 mm
Body Diameter: 25 mm
Weight: 178.5 grams
Body Colour: Grey
Body Material: Aluminium alloy
Switch Type: Push button
Impact Resistance: 1 m
Environmental: IPXX
Warranty: 2 years standard (7 years with product registration)

Packaging and Contents

Supplied in retail packaging and contains:
Ledlenser Workers Friend body x 1
Torch head attachment x 1
Work light attachment x 1
Gooseneck attachment x 1
Inspection light attachment x 1
Ledlenser 2500 mAh 18650 lithium-ion battery x 1
Micro USB to USB-A charging cable x 1
Manual x 1