Home Torches Head Torches Core Lighting CLH200 Rechargeable Sensor LED Head Torch
Core Lighting  |  SKU: CLH200

Core Lighting CLH200 Rechargeable Sensor LED Head Torch

£10.98

The Core Lighting CLH200 rechargeable head torch offers a maximum output of 200 lumens with a beam range of 55 metres distance from a 3 W cree LED.

The left hand power button operates the torch normally and each press will cycle through high, mid, low and off, while holding the button down in any state will access the SOS mode.

There is also a sensor control switch so that the torch can be turned on and off by waving your hand in front of the torch (within 15 cm range), which is perfect for when you're carrying out tasks where your hands may be dirty so you don't want to touch the torch. To operate the torch with sensor control you can activate it by pressing the right button either while the light is on in any mode to use a particular setting, or if pressed from off it will only access the high output. Pressing either button will turn the sensor mode off. 

Powered by a built in 1200 mAh lithium polymer rechargeable battery, the CLH200 has a run-time of 5 hours. Recharging the unit is easy, simply insert the micro USB cable into the underside of the head torch (with the torch turned off) and the other end into a USB power source. To show charging is in progress a red LED will illuminate and turn green to show charging is complete after approximately 4 hours.

The high visibility yellow buttons means that they are easier to be seen, which is useful when working in an industrial environment. The fully adjustable nylon headband is comfortable on the head and a hinged bracket allows the head torch to be adjusted downwards within a 45° angle so you can direct the light source where you need it most.

Product Features

USB rechargeable
Rotational head
Sensor control
Adjustable and comfortable head band


Technical Details

Operating Modes: High / Mid / Low / Strobe / Motion Sensor
Luminous Flux: Up to 200 lumens
LED: 1 x white LED
Focus: Fixed focus
Beam Range: Up to 55 m
Run Time: Up to 5 hours
Charging Time: 4 hours
Batteries Required: Built in lithium polymer rechargeable battery x 1
Weight: 50 grams
Dimensions: 50 x 30 x 36 mm
Switch Type: Push button / sensor
Impact Resistance: 1.5 m
Warranty: 1 year


Packaging and Contents

Supplied in retail packaging and includes:
Core Lighting CLH200 head torch x 1
Micro-USB charging cable x 1
Manual x 1


Customer Reviews

Based on 16 reviews
94%
(15)
6%
(1)
0%
(0)
0%
(0)
0%
(0)
A
Anonymous
Good sturdy head light

Stayed in place on my head and gives a very good light. The on-off hand operation turned out to be a bit sensitive to any movement while fitting a car battery so didn't use this facility. Probably ok if not working with hands close to the sensor.

M
Michael S.

Two weeks in,seems to work fine

P
Philip H.
Really well-designed and constructed head torch

I'm still doing work on printed circuit boards despite being a 'senior citizen' with some eyesight problems and this little head torch really helps by getting the extra light I need in exactly the right spot. I find the infra red feature really handy as I can turn it on and off with a flick of my hand rather than having to fiddle for the on/off button!It's quite comfortable to wear for longish periods but I might try to fit a little piece of foam between the torch and the strap to increase the cushioning so I can keep it on for longer.Big thanks to Big Clive of bigclivedotcom on Youtube for his review, teardown and recommendation for this product.

Core Lighting CLH200 Rechargeable Sensor LED Head Torch
Core Lighting

Core Lighting CLH200 Rechargeable Sensor LED Head Torch

£10.98

The Core Lighting CLH200 rechargeable head torch offers a maximum output of 200 lumens with a beam range of 55 metres distance from a 3 W cree LED.

The left hand power button operates the torch normally and each press will cycle through high, mid, low and off, while holding the button down in any state will access the SOS mode.

There is also a sensor control switch so that the torch can be turned on and off by waving your hand in front of the torch (within 15 cm range), which is perfect for when you're carrying out tasks where your hands may be dirty so you don't want to touch the torch. To operate the torch with sensor control you can activate it by pressing the right button either while the light is on in any mode to use a particular setting, or if pressed from off it will only access the high output. Pressing either button will turn the sensor mode off. 

Powered by a built in 1200 mAh lithium polymer rechargeable battery, the CLH200 has a run-time of 5 hours. Recharging the unit is easy, simply insert the micro USB cable into the underside of the head torch (with the torch turned off) and the other end into a USB power source. To show charging is in progress a red LED will illuminate and turn green to show charging is complete after approximately 4 hours.

The high visibility yellow buttons means that they are easier to be seen, which is useful when working in an industrial environment. The fully adjustable nylon headband is comfortable on the head and a hinged bracket allows the head torch to be adjusted downwards within a 45° angle so you can direct the light source where you need it most.

Product Features

USB rechargeable
Rotational head
Sensor control
Adjustable and comfortable head band


Technical Details

Operating Modes: High / Mid / Low / Strobe / Motion Sensor
Luminous Flux: Up to 200 lumens
LED: 1 x white LED
Focus: Fixed focus
Beam Range: Up to 55 m
Run Time: Up to 5 hours
Charging Time: 4 hours
Batteries Required: Built in lithium polymer rechargeable battery x 1
Weight: 50 grams
Dimensions: 50 x 30 x 36 mm
Switch Type: Push button / sensor
Impact Resistance: 1.5 m
Warranty: 1 year


Packaging and Contents

Supplied in retail packaging and includes:
Core Lighting CLH200 head torch x 1
Micro-USB charging cable x 1
Manual x 1

View product