Free Gift Offer!

Spend over £100 and receive a free NEBO Plasma Lighter

Home Torches Handheld Torches Nitecore MH12 V2 Rechargeable LED Torch
Nitecore  |  SKU: MH12-V2

Nitecore MH12 V2 Rechargeable LED Torch

£69.96 £79.98

The Nitecore MH12 V2 is the first torch in the MH Series range to feature the next generation 21700 lithium-ion battery, with an updated higher output of 1200 lumens from a Cree XP-L2 V6 LED and the ability to charge the battery inside the torch, using USB Type C for faster charging.

It also features dual fuel technology that means as well as being powered by the included NL2150 21700 5000 mAh lithium-ion battery, it can also use an 18650 lithium-ion rechargeable battery, two 16340 lithium-ion rechargeable batteries or two CR123A non-recharge lithium metal batteries when using the included battery carrier that allows for compatibility of the other battery types. This flexibility means you have more than one option when it comes to a backup, including a non-rechargeable option for when power isn't available.

With the included NL2150 battery inserted into the torch, the battery can be charged whilst inside the torch using the supplied USB type C charging lead. Ensure the isolation disc has been removed from the battery compartment, and that the head and tail cap are tightly screwed on before lifting the dust cover to reveal the Type C USB port, that is located on the head of the torch. Plug the included cable into the USB Type C charging port, and the other end into a suitable USB power source.

The blue charging indicator light around the side switch will slowly flash while charging is in progress and turn solid blue when charging is complete. A full charge takes approximately 4 hours when charging the 21700 5000 mAh battery using an adaptor with a 5 V, 2 A output. An 18650 battery can also be charged inside the torch, however the 16340 batteries cannot be charged inside the torch. Never attempt to charge CR123A lithium metal batteries.

Four brightness levels as well as three special modes are available in daily mode, while in tactical mode only four brightness levels and strobe are available. The light is turned on and off with the tail cap button, which can also be half pressed to provide momentary illumination until it is released. Once turned on single press the side mode button to cycle ultra-low, low, mid, high in daily mode, or high, mid, low, ultra-low in tactical mode. The last used brightness level or strobe will be remembered when the light is next turned on in daily mode, while tactical mode will only recall high and strobe.

In daily mode press and hold the side button while the torch is on to access the special modes and cycle through strobe, beacon, SOS and release the button on the desired mode. When in tactical mode only strobe can be accessed by holding down the side button with the light on. To exit special modes either press the side mode button to return to the previous output or turn the torch off with the tail button. As an extra defence feature, the strobe randomly changes frequency which is useful for disorienting an attacker as the human eye cannot cope with the fast changing strobe.

To change between the daily or tactical user modes, with the torch off, hold down the side button, click in the tail switch and continue to hold the side button until the blue indicator flashes rapidly. The light will then flash once for daily mode or flash twice for tactical mode.

A built in blue power indicator around the side button indicates the remaining battery voltage with a series of flashes by clicking the tail switch while holding the side button down and then releasing both buttons. For example if the voltage is 4.2 V it will flash four times, puase and flash twice more.

The included NTH10 tactical holster is made from sturdy plastic that keeps the torch in place and allows for immediate quick draw when required without having to lift a flap up first, and provides a convenient way for carrying your torch.

The integrated advance temperature regulation (ATR) technology regulates the output of the MH12 V2 according to the working condition and ambient environment to maintain the optimal performance.

Product Features

USB Type C fast charging with included cable
Duel fuel capability
Tail switch and side switch for easy operation
Daily mode and tactical mode available
Optical lens with double sided scratch resistant coating
Built-in power indicator beneath the side button
Nitecore NL2150 lithium-ion battery included

Operational Modes

High: 1200 lumens; 3 hours, 45 minutes run-time; 202 m beam range
Mid: 300 lumens; 8 hours run-time; 102 m beam range
Low: 55 lumens; 46 hours run-time; 42 m beam range
Ultra-low: 1 lumens; 1500 hours run-time; 6 m beam range
Strobe/Beacon/SOS: 1200 lumens

Tested to ANSI/PLATO FL1-2019 standards in laboratory conditions using a 21700 5000 mAh lithium-ion battery. The data may vary slightly in real world use depending on battery type, individual usage habits and environmental factors.


Technical Details

Type: Tactical hand held LED torch
Operating Modes: Ultra-low / Low / Mid / High / Strobe / Beacon / SOS
Luminous Flux: Up to 1200 lumens
Lamp Type: Cree XP-L2 V6 LED
Beam Range: Up to 202 m
Recommended Battery: 1 x NL2150 21700 5000 mAh lithium-ion battery (included)
Other Compatible Batteries: 1 x 18650 lithium-ion battery / 2 x CR123A lithium metal battery / 2 x RCR123A lithium-ion battery
Overall Length: 158 mm
Head Diameter: 25.4 mm
Barrel Diameter: 25.4 mm
Tail diameter: 27.2 mm
Weight: 84.5 grams
Body Colour: Black
Body Material: Constructed from aero grade aluminium alloy
Body Finish: HA III military grade hard anodised
Switch Type: Tail cap button and side button
Impact Resistance: 1 m
Environmental: Dust resistant and waterproof to IP68 standards (2 m)
Warranty: 5 years (torch), 1 year (battery)


Packaging and Contents

Supplied in a retail box and contains:
Nitecore MH12 V2 LED torch x 1
Nitecore NL2150 21700 battery x 1
USB type C charging cable x 1
NTH10 holster x 1
18650/CR123A battery magazine x 1
Spare O-ring x 1
Pocket clip x 1
Lanyard x 1
Spare tail switch cover x 1
Manual x 1


Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
P
Paul M.
Fantastic torch

Very pleased with the torch seems well made & very solid with a good strong beam. I especially like the rechargeable battery being in the torch while charging makes it very easy

S
Steve H.
MH12 V2

Very pleased with this purchase, well engineered light and comfortable to use. Charging very simple without having to remove the battery. Powerful light with several options to scroll through if required.If I was to be extremely picky then it would be the mode switch which I find difficult to access in the dark. The button could be more prominent and the blue charging light which surrounds it could be engineered to stay on when the torch is activated. This would mean you can get to the mode switch easily at night. Would definitely recommend this product and the prompt service from Torch Direct.

D
Deleted u.
(redacted)

(redacted)

Nitecore MH12 V2 Rechargeable LED Torch
Nitecore

Nitecore MH12 V2 Rechargeable LED Torch

£69.96 £79.98

The Nitecore MH12 V2 is the first torch in the MH Series range to feature the next generation 21700 lithium-ion battery, with an updated higher output of 1200 lumens from a Cree XP-L2 V6 LED and the ability to charge the battery inside the torch, using USB Type C for faster charging.

It also features dual fuel technology that means as well as being powered by the included NL2150 21700 5000 mAh lithium-ion battery, it can also use an 18650 lithium-ion rechargeable battery, two 16340 lithium-ion rechargeable batteries or two CR123A non-recharge lithium metal batteries when using the included battery carrier that allows for compatibility of the other battery types. This flexibility means you have more than one option when it comes to a backup, including a non-rechargeable option for when power isn't available.

With the included NL2150 battery inserted into the torch, the battery can be charged whilst inside the torch using the supplied USB type C charging lead. Ensure the isolation disc has been removed from the battery compartment, and that the head and tail cap are tightly screwed on before lifting the dust cover to reveal the Type C USB port, that is located on the head of the torch. Plug the included cable into the USB Type C charging port, and the other end into a suitable USB power source.

The blue charging indicator light around the side switch will slowly flash while charging is in progress and turn solid blue when charging is complete. A full charge takes approximately 4 hours when charging the 21700 5000 mAh battery using an adaptor with a 5 V, 2 A output. An 18650 battery can also be charged inside the torch, however the 16340 batteries cannot be charged inside the torch. Never attempt to charge CR123A lithium metal batteries.

Four brightness levels as well as three special modes are available in daily mode, while in tactical mode only four brightness levels and strobe are available. The light is turned on and off with the tail cap button, which can also be half pressed to provide momentary illumination until it is released. Once turned on single press the side mode button to cycle ultra-low, low, mid, high in daily mode, or high, mid, low, ultra-low in tactical mode. The last used brightness level or strobe will be remembered when the light is next turned on in daily mode, while tactical mode will only recall high and strobe.

In daily mode press and hold the side button while the torch is on to access the special modes and cycle through strobe, beacon, SOS and release the button on the desired mode. When in tactical mode only strobe can be accessed by holding down the side button with the light on. To exit special modes either press the side mode button to return to the previous output or turn the torch off with the tail button. As an extra defence feature, the strobe randomly changes frequency which is useful for disorienting an attacker as the human eye cannot cope with the fast changing strobe.

To change between the daily or tactical user modes, with the torch off, hold down the side button, click in the tail switch and continue to hold the side button until the blue indicator flashes rapidly. The light will then flash once for daily mode or flash twice for tactical mode.

A built in blue power indicator around the side button indicates the remaining battery voltage with a series of flashes by clicking the tail switch while holding the side button down and then releasing both buttons. For example if the voltage is 4.2 V it will flash four times, puase and flash twice more.

The included NTH10 tactical holster is made from sturdy plastic that keeps the torch in place and allows for immediate quick draw when required without having to lift a flap up first, and provides a convenient way for carrying your torch.

The integrated advance temperature regulation (ATR) technology regulates the output of the MH12 V2 according to the working condition and ambient environment to maintain the optimal performance.

Product Features

USB Type C fast charging with included cable
Duel fuel capability
Tail switch and side switch for easy operation
Daily mode and tactical mode available
Optical lens with double sided scratch resistant coating
Built-in power indicator beneath the side button
Nitecore NL2150 lithium-ion battery included

Operational Modes

High: 1200 lumens; 3 hours, 45 minutes run-time; 202 m beam range
Mid: 300 lumens; 8 hours run-time; 102 m beam range
Low: 55 lumens; 46 hours run-time; 42 m beam range
Ultra-low: 1 lumens; 1500 hours run-time; 6 m beam range
Strobe/Beacon/SOS: 1200 lumens

Tested to ANSI/PLATO FL1-2019 standards in laboratory conditions using a 21700 5000 mAh lithium-ion battery. The data may vary slightly in real world use depending on battery type, individual usage habits and environmental factors.


Technical Details

Type: Tactical hand held LED torch
Operating Modes: Ultra-low / Low / Mid / High / Strobe / Beacon / SOS
Luminous Flux: Up to 1200 lumens
Lamp Type: Cree XP-L2 V6 LED
Beam Range: Up to 202 m
Recommended Battery: 1 x NL2150 21700 5000 mAh lithium-ion battery (included)
Other Compatible Batteries: 1 x 18650 lithium-ion battery / 2 x CR123A lithium metal battery / 2 x RCR123A lithium-ion battery
Overall Length: 158 mm
Head Diameter: 25.4 mm
Barrel Diameter: 25.4 mm
Tail diameter: 27.2 mm
Weight: 84.5 grams
Body Colour: Black
Body Material: Constructed from aero grade aluminium alloy
Body Finish: HA III military grade hard anodised
Switch Type: Tail cap button and side button
Impact Resistance: 1 m
Environmental: Dust resistant and waterproof to IP68 standards (2 m)
Warranty: 5 years (torch), 1 year (battery)


Packaging and Contents

Supplied in a retail box and contains:
Nitecore MH12 V2 LED torch x 1
Nitecore NL2150 21700 battery x 1
USB type C charging cable x 1
NTH10 holster x 1
18650/CR123A battery magazine x 1
Spare O-ring x 1
Pocket clip x 1
Lanyard x 1
Spare tail switch cover x 1
Manual x 1

View product