Nitecore E4K LED Torch
Nitecore E4K LED Torch is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
The Nitecore E4K is the next generation in the Explorer series, being powered by a 21700 lithium-ion battery yet still retaining the compact size, and has been upgraded slightly to incorporate a newer switch design.
It utilises 4 x Cree XP-L2 V6 LEDs for an impressive maximum output of 4400 lumens and a beam range of 211 metres on the turbo setting.
The torch is powered with the included Nitecore NL2150HPR high discharge 15 A, 21700 5000 mAh USB-C lithium-ion rechargeable battery, which is charged outside of the torch via the USB Type C charging port on the battery itself using the included Type C charging cable for fast charging. Other 21700 lithium-ion batteries can be used, however they need to have a high discharge current of at least 15 A.
Although a 21700 lithium-ion battery is recommended, the E4K can also two 16340 (RCR123A) lithium-ion rechargeable batteries or two CR123A lithium metal non rechargeable batteries using the included battery adaptor that makes the batteries compatible, which provides great versatility. The turbo output cannot be accessed when using 16340/CR123A batteries.
Five brightness levels and three special modes are available, which are controlled using the updated two stage side switch. To turn the torch on fully press the switch and it will come on in the last used brightness level. Once turned on the brightness level can be changed with half press of the button to cycle through ultra-low, low, mid, high and turbo. Instant momentary turbo access can also be achieved by half pressing and holding the button with the light on, or fully pressing and holding the button with the light off, and once released the light will go out.
Direct access to ultra-low can also bee achieved by half pressing and holding the button with the light off, which is great for those times you need the smallest bit of light but don't want to cycle through the outputs or turn the torch on in a higher memorised setting.
Special modes are accessed with the light on by fully pressing and holding the button to access the strobe, and then the mode can be changed with half presses of the button to cycle through SOS, beacon, strobe. To exit the special modes fully press the button to turn the light off.
The E4K also features a power indicator light which will flash to notify the user of the battery voltage when the battery is first installed in the torch. For example if the battery is 4.2 V the blue light will flash four times, pause and then flash twice more. The indicator will also show the battery power when pressed once while the torch is off by flashing three times for above 50% power, two times for below 50% power and flash once for below 10 % power.
The integrated advance temperature regulation (ATR) technology regulates the output of the E4K according to the working condition and ambient environment to maintain optimal performance.
Product Features
Single button offers access to five brightness levels and three special modes
Strobe uses randomly changing frequencies for stronger dizzying effect
Integrated power indicator notifies battery voltage (accurate to 0.1 V)
Features advanced temperature regulation (ATR) technology
Electronic reverse polarity protection
Detachable two-way anti-rolling clip
Instant access to turbo / ultra-low output
Tail stand capability
Operational Modes
Turbo: 4400 lumens; 30 minutes run-time; 211 m beam range*
High: 1050 lumens; 3 hours, 15 minutes run-time; 105 m beam range
Mid: 320 lumens; 7 hours, 30 minutes run-time; 57 m beam range
Low: 50 lumens; 45 hours run-time; 21 m beam range
Ultra-low: 2 lumens; 700 hours run-time; 3 m beam range
Strobe / SOS / Beacon: 4400 lumens
Note: *The run-time for turbo is tested without temperature regulation
Tested to ANSI/PLATO FL 1-2019 standards in laboratory conditions using the included 21700 5000 mAh lithium-ion battery. The data may vary slightly in real world use depending on battery type, individual usage habits and environmental factors.
Technical Details
Type: Everyday carry LED torch
Operating Modes: Ultra-low / Low / Mid / High / Turbo / Strobe / SOS / Beacon
Lamp Type: 4 x Cree XP-L2 V6 LED
Focus: Fixed focus
Reflector: Smooth aluminium
Beam Range: Up to 211 m
Batteries Required: 1 x 21700 15 A lithium-ion (included) or 2 x CR123A lithium metal / 2 x 16340 lithium-ion (not included)
Overall Length: 117.6 mm
Head Diameter: 28.6 mm
Barrel Diameter: 25.8 mm
Weight: 80 grams
Body Colour: Black
Body Material: Aircraft grade aluminium
Body Finish: HA III military grade hard anodised
Switch Type: Single button front switch
Impact Resistance: 1 m
Environmental: Waterproof to IPX8 standard (2 m)
Warranty: 5 years (torch), 1 year (battery)
Packaging and Contents
Supplied in retail packaging and includes:
Nitecore E4K LED torch x 1
NL2150HPR USB-C 5000 mAh 15 A 21700 lithium-ion battery x 1
USB Type C charging cable x 1
Holster x 1
Spare O-ring x 1
Pocket clip x 1
CR123A battery adaptor x 1
Manual x 1