Olight Marauder 2 Rechargeable LED Torch
Olight Marauder 2 Rechargeable LED TorchOlight Marauder 2 Rechargeable LED TorchOlight Marauder 2 Rechargeable LED Torch
Olight Marauder 2 Rechargeable LED TorchOlight Marauder 2 Rechargeable LED TorchOlight Marauder 2 Rechargeable LED Torch

Olight Marauder 2 Rechargeable LED Torch

Brand:  Olight
Product Code:  OL1028


6 in stock
maximum allowance of 20 characters

The Olight Marauder 2 replaces the popular X7R Marauder, remaining compact and rechargeable yet offering an upgraded super powerful output of 14000 lumens at Level 7 in floodlight mode, which will have a timed downshift to prevent the LED from overheating.

A large LED has been added in the centre of the head to enable an 800 m spotlight beam, and 12 small LEDs circle the edge to produce the 14000 lumen floodlight beam.

Seven brightness levels in both spot and flood are available, and are controlled using the two switches on the body. The lower slide switch toggles between the spot or flood output, pushing up for spot or down for flood. The circular blue switch will turn the light on and off with a single press, however to prevent accidental activation the Marauder 2 will automatically lock after 30 seconds without use, so the button has to be rotated 90° to unlock the torch.

With the light unlocked and turned on, the brightness level can be changed by twisting the rotary button clockwise to increase the brightness or anti-clockwise to decrease the brightness. The indicator up the left hand side has seven lights that will illuminate with the corresponding number of lights to the brightness level you are on, for example level 4 will show four lights. Up the right hand side the indicator shows the battery status, and both sets of indicators will display for 3 seconds after the brightness level is accessed. If the button is pressed with the light locked, it will display battery status and brightness level indicators up the sides.

A single press will turn the light off and the last used level, except level 7, will be remembered the next time the light is turned on. With the button unlocked, a quick double press will provide instant access to level 7 and another quick double press will drop it to level 4. A quick triple press of the unlocked button will enter the strobe mode.

As well as the active thermal management system that reduces the output when the temperature gets too hot, the Marauder 2 also features a nifty proximity sensor that will automatically reduce the output if the head of the torch becomes too close to an object when it is in the higher settings so that the heat expelled from the torch doesn't cause any damage.

Powered by a built-in 54Wh rechargeable battery pack, the Marauder 2 is recharged via the upgraded USB-C charging port which allows fast charging and reverse charging, and is shielded by a improved port cover design resembling aperture blades. The charging port is cleverly concealed to provide the IPX8 waterproof rating and is revealed by twisting the tail of the torch anti clockwise. The provided USB-C to USB-C cable can then be inserted and connected to the included USB-C wall adaptor. The charging indicator will glow red to show charging is in progress and turn green to show charging is complete after approximately 2 hours, 30 minutes (when using PD 30 W).

The same USB-C port can also be used to charge external devices, such a mobile phones, thanks to the innovative reverse charging capability, saving the need for second port. The indicator will flash green when an external device is connected, and will stop charging if the battery level reaches 5%. Only one device can be charged at once and you must not plug in a multi USB block.

As well as a hidden charging port the Marauder 2 also has a hidden lanyard hole that is tucked away on the front when not in use, and can be pulled out to attach the included heavy duty lanyard. The body is made from aluminium alloy for durability and also has a silicone grip for a firm hold.

A fantastic torch for outdoor ventures, hunting, search and rescue, marine navigation, and much more.

Please Note: Always fully read the instructions and safety guidance in the manual before first use.

Operational Modes

Level 7 Output (lumens): 14000 / 3200 / 1600 (Floodlight) - 850 / 650 / 500 / 300 / 200 / 100 (Spotlight)
Level 7 Run-time (minutes): 5 / 140 / 45 (Floodlight) - 20 / 170 / 85 / 25 / 15 / 85 (Spotlight)

Level 6 Output (lumens): 6400 / 3200 / 1600 / 800 (Floodlight) - 650 / 500 / 300 / 200 / 100 (Spotlight)
Level 6 Run-time (minutes): 13 / 120 / 40 / 22 (Floodlight) - 115 / 180 / 20 / 20 / 85 (Spotlight)

Level 5  Output (lumens): 3200 / 1600 / 800 / 400 / 200 (Floodlight) - 500 / 300 / 200 /100/ 50 (Spotlight)
Level 5 Run-time (minutes): 90 / 90 / 10 / 10 / 70 (Floodlight) - 360 / 25 / 15 / 80 / 110 (Spotlight)

Level 4 Output (lumens): 1600 (Floodlight) - 300 (Spotlight)
Level 4 Run-time (hours): 7.5 (Floodlight) - 11.7 (Spotlight)

Level 3 Output (lumens): 800 (Floodlight) - 200 (Spotlight)
Level 3 Run-time (hours): 13 (Floodlight) - 19 (Spotlight)

Level 2 Output (lumens): 400 (Floodlight) - 100 (Spotlight)
Level 2 Run-time (hours): 22 (Floodlight) - 31 hours (Spotlight)

Level 1 Output (lumens): 200 (Floodlight) - 50 (Spotlight)
Level 1 Run-time (hours): 40 (Floodlight) - 59 (Spotlight)

Note: The above data is measured in lab conditions, therefore results may vary due to environmental and heat dissipation conditions. The overheat protection will decrease the output in Level 7, Level 6 and level 5 to protect the LED.

Technical Details

Type: Rechargeable LED torch
Operating Modes: L1 / L2 / L3 / L4 / L5 / L6 / L7 / Strobe
Luminous Flux: Up to 14000 lumens
Lamp Type: 1 x Central spot cool white LED / 12 x flood cool white LEDs
Lens: Optical Lenses - 12 TIR lenses and 1 converging lens
Beam Range: Up to 800 m
Batteries: Built-in 52 Wh, 5000 mAh battery pack
Overall Length: 140 mm
Head Diameter: 79 mm
Body Diameter: 53 mm
Weight: 750 grams
Black Colour: Black with blue bezel and switch
Body Material: Aluminium alloy
Body Finish: Type III hard anodised
Switch Type: Side mounted rotary button and slide switch
Impact Resistance: 1 m
Environmental: Waterproof to IPX8 standard
Warranty: Torch: 5 years, Batteries: 1 year
Regulatory Compliance: CE / RoHS

Packaging and Contents

Supplied in a retail box and contains:
Olight Marauder 2 LED torch (built-in battery) x 1
USB-C to USB-C charging cable x 1
UK mains USB-C adaptor x 1
Lanyard x 1
Manual x 1

Olight Marauder 2 Hard Plastic Carry Case

Olight Marauder 2 Hard Plastic Carry Case

Store and carry your Olight Marauder 2 torch and accessories

On Order. Expected Soon

This Olight hard carry case is designed specifically for the Olight Marauder 2 torch and it's accessories.

[More details]

Olight Marauder 2 Rechargeable LED Torch (Limited Edition Orange)

Olight Marauder 2 Rechargeable LED Torch (Limited Edition Orange)

14,000 lumens output on level 7- Drops down to 3200 lumens after 5 minutes, then after a further 140 minutes it drops to 1600 lumens to protect the LED

7 in stock

The Marauder 2 is also available in black, please see the Related Items tab

This is the limited edition Orange version of the Marauder 2, only available while stocks last.

[More details]
£359.95Add to Basket

Be the first to Write a Review for this item!

Receive a great FREE GIFT from Torch Direct

To qualify simply spend over £75 with us, on any one order, minus any delivery fees.
You will then receive a Silverpoint Hunter XL120RL LED Head Torch completely FREE!

Free gift offer from Torch Direct Ltd

Make it personal with our laser engraving service!

We charge £3.95 per engraving and all you have to do to obtain this service is complete the text form above with the text that you wish to be laser engraved. The text box is located just above the add to basket button, do this before adding your chosen product to your shopping basket.

You can chose to engrave a name, slogan or any text you want.

We are able to reproduce lowercase, uppercase, numbers and punctuation marks, and you may use a maximum of 20 characters per item. Please take great care when typing your chosen text as our system will capture, process, and replicate exactly what has been typed by you. Mistakes cannot be corrected after the engraving has been completed and refunds or exchanges will not be offered.

How do we engrave your product?

We use a top quality fibre laser engraving machine, which provides an accurate beam of laser light to mark your product perfectly and permanently.

Which typeface do we use for engraving and what size is it?

We use a typeface called 'Arial' for all our engraving as we find it gives the best results overall. Depending on which product is being engraved, our machine operators will adjust the text size to fit any available space.

Some samples from our engraving gallery (click to zoom)

If you would like to see more examples then please visit our Engraving Service page.

Customers Who Bought This Item Also Bought
Silverpoint Firefly LED Torch

Silverpoint Firefly LED Torch

4 in stock

The Silverpoint Firefly is compact and light, and this fun little torch is small enough to fit into any pocket or bag.

[More details]
£7.95Add to Basket