Hand Torches: 500 to 999 Lumens

The Coast HP14 high performance focusing LED torch uses a slightly larger casing than the HP7 which allows for the use of the world's most common battery, the AA. With a light output of 629 lumens, the Coast HP14 light has the brightness professionals are looking for.

The Coast Polysteel 600 is tough and ready for action. It features a stainless steel core that protects the inner components, meaning the Polysteel 600 is impact resistant up to a 3 metre drop height. The outer casing is made of lightweight polymer, displaying a comfortable non-slip grip design.

The Coast Polysteel 600R is a rechargeable version of the popular Polysteel 600 and offers an output of 530 lumens or 710 lumens depending on the battery type. The dual power system means that it can be powered by the rechargeable lithium-ion battery pack for increased run-times and an output of 530 lumens or it can use four non-rechargeable AA alkaline batteries which provides a shorter run-time but a higher maximum output of 710 lumens.

The Coleman BatteryGuard 500L is a sturdy torch with a maximum output of 500 lumens. The torch is operated with the two stage slide switch on the neck of the torch.

The Coleman BatteryGuard 750L is a sturdy torch with a maximum output of 750 lumens. The torch is operated with the two stage slide switch on the neck of the torch.

The Coleman Divide+ 700 offers a maximum output of 700 lumens. The torch is operated with the push button on the neck of the torch and cycles between high and low modes, while the textured reflector lens shines up to 330 metres range.

The Duracell MLT-200C LED torch is part of the Multi-Pro series and offers a maximum output of 550 lumens on the highest setting. Powered by six AA alkaline batteries, the MLT-200C has a run-time of up to 3 hours and can shine up to 273 metres range.

The Duracell MLT-20C LED torch is part of the Multi-Pro series and offers a maximum output of 510 lumens on the highest setting. Powered by six AAA alkaline batteries, the MLT-20C has a run-time of up to 5 hours, 20 minutes and can shine up to 268 metres range.

The Energizer Tac 700 is tough and ready for action with a maximum out of 700 lumens on the highest setting. Three brightness levels of high, mid and low are available and the outputs are cycled through with the tail cap push button.

The Fenix E16 is a compact EDC torch that is capable of 700 lumens maximum output from the Cree XP-L HI neutral white LED. It is powered by either one CR123A lithium metal non-rechargeable battery or one high discharge current 16340 lithium-ion rechargeable battery of at least 2.5 A, offering different outputs depending on which battery is used.

The Fenix E18R is a compact rechargeable torch that offers 750 lumens maximum output from the Cree XP-L HI white LED. It is powered by one 16340 lithium-ion rechargeable battery and included is the Fenix ARB-L16-700P lithium-ion battery, but it is also compatible with the other three Fenix 16340 battery versions.

The Fenix E25 Ultimate Edition utilises a Cree XP-L V5 LED and has a maximum output of 1000 lumens in turbo mode, when using two 14500 lithium-ion batteries. A dual switch on the head gives you total control of the light, with one controlling flashing modes and the other controlling the brightness levels. Holding down both switches at the same time for 3 seconds enters lock out mode to prevent accidental activation.

The Fenix E35 Ultimate Edition has been upgraded for 2016 and now offers 1000 lumens output on the highest setting. Featuring a Cree XM-L2 U2 LED the E35 Ultimate 2016 offers five brightness levels of eco, low, mid, high and turbo, with strobe and SOS also available.

The Fenix FD30 is a compact and powerful torch from Fenix's premium focusing LED torch range, and delivers a maximum of 900 lumens output using a Cree XP-L HI LED.

The Fenix FD41 is the second model in the range of premium Fenix focusing LED torches, and delivers a maximum of 900 lumens output using a Cree XP-L HI LED.

The Fenix FD45 is a compact and powerful torch from Fenix's premium focusing LED torch range, and delivers a maximum of 900 lumens output using a Cree XP-L HI neutral white LED which provides superior colour rendition. A high efficiency TIR optical focusing lens offers a smooth beam that can be easily focused from a spot with spill light to a wide angle 94° flood light using the rotary focusing ring.

The Fenix LD15R is a compact rechargeable torch that offers 500 lumens maximum output from the Cree XP-G3 white LED and also has secondary red LED. It is powered by one 16340 lithium-ion rechargeable battery (included), which is easily recharged inside the torch using the provided USB cable

The Fenix LD41 2015 Edition is an ultra-high-performance 4 x AA powered torch, with an updated lumen output of 960 lumens. With an efficient and powerful Cree XM-L2 U2 LED, the LD41 2015 features four brightness levels of low, mid, high, turbo and also features strobe and SOS modes. The maximum beam range of 300 metres makes this a perfect outdoor torch for hiking and other activities where no other light source is available.

The Fenix PD25 is a compact, high powered must-have for torch lovers. It features a Cree XP-L V5 LED to produce a maximum output of 550 lumens when using a 16340/RCR123A lithium-ion rechargeable battery.

The Fenix PD32 2016 Edition updates the previous model, now with an amazing 900 lumens output from a Cree XP-L HI LED in a compact, lightweight body. Powered by two non-rechargeable CR123A lithium batteries, one rechargeable 18650 lithium-ion battery or two rechargeable RCR123A lithium-ion batteries the PD32 2016 offers five brightness levels, strobe and SOS, providing ultimate versatility.

Delivering a stunning 1000 lumen maximum output from its CREE XP-L (V5) LED, the PD35 Tactical is small, powerful and versatile. The PD35 Tactical offers six output modes including strobe when in outdoor mode, or for a more tailored experience, tactical mode offers turbo, low and strobe. Simply hold down the side switch for more than three seconds to select the desired mode.

The Fenix RC20 is a rechargeable LED torch with a maximum output of 1000 lumens in turbo mode from it's Cree XM-L2 U2 LED. Powered by a tailored Fenix 2600 mAh ARB-L1-2600 lithium-ion battery, the RC20 can run up to 120 hours when in low mode. The battery can be inserted either way around, featuring positive and negative poles at both ends, which is perfect for after dark battery changes.

Please note: Fenix 18650 ARB-L2 series lithium-ion batteries are not compatible with this model.

The Fenix TK09 2016 is a compact 900 lumen tactical torch featuring a Cree XP-L HI LED for excellent beam throw. The tactical tail switch provides momentary on and on/off functions, and quick half presses cycle through the three brightness levels and strobe in the order of high, mid, low and strobe. Fully press the switch in when you reach the desired output.

The Fenix TK16 offers a maximum 1000 lumen white light output, as well as a 240 metre beam range all in a compact form that is ideal for hand held use and weapon mounting. Featuring four brightness levels and strobe mode the TK16 has a new tail cap dual switch that allows control of all the modes.

The iPROTEC Pro 500 Light is a high power LED torch that outputs 500 lumens of white light on the highest setting. The Pro 500 has a crenullated bezel which helps protect the convex lens if the torch was dropped.

With up to 1000 lumens output and a length of just 115 mm, the new rechargeable Ledlenser® F1R is not just extremely powerful, but thanks to the new battery pack concept, it is also extremely environmentally aware!

The Ledlenser iW5R Flex is a dual function unit offering a front main flood light with 600 lumens maximum output and also a single spot light in the top of the torch with 100 lumens output. The main flood light has two outputs of high / low and the spot light has a single output.

The Ledlenser iW7R is a dual function unit offering a front main flood light with 600 lumens maximum output and also a single spot light in the top of the torch with 300 lumens output. The main flood light has two outputs of high / low and the spot light has a single output.

Introducing the new Ledlenser M17R. The M17R is a microprocessor controlled, rechargeable version of the Ledlenser P17 with an output of 850 lumen's, a new Xtreme Power LED makes sure that the M17R torch achieves a greater lighting power than the Ledlenser P17 and the P17R.

The Ledlenser MT6 has a maximum output of 600 lumens from a single Xtreme white LED. Powered by three AA alkaline or NiMH rechargeable batteries the MT6 offers three brightness settings and strobe.

The NEW Ledlenser P14 updates the popular P14.2, now offering a maximum output of 800 lumens on the boost setting. Powered by four AA alkaline batteries, the P14 offers three brightness settings of boost, power and low power, which are operated using the push button on the tail of the torch.

Introducing the improved Maglite Mag Charger rechargeable system, now featuring an LED. The same look and feel as before, but a whole lot brighter! Now boasting 643 lumens in high mode, the LED version has a beam range of 407 metres. With the familiar quick click system, users can easily select between three modes within the chosen function set.

All the features you love about the original MAG-TAC, but now in a rechargeable form. An advanced lighting tool powered by a high capacity Lithium Iron Phosphate (LiFePO4) rechargeable battery, the MAG-TAC LED rechargeable is engineered for long service life, with a charge time of 2 hours, 30 minutes.

Introducing the Maglite 3rd generation 2 D cell torch. The same look and feel as before, but a whole lot brighter! Now boasting 524 lumens in high mode, the 3rd generation 2 D cell has a beam range of 366 metres.

Introducing the Maglite 3rd generation 3 D cell torch. The same look and feel as before, but a whole lot brighter! Now boasting 625 lumens in high mode, the 3rd generation 3 D cell has a beam range of 406 metres.

The Magligte ML300LX 2 D cell torch offers the same outputs and run-times as the Maglite ML300L 2 D cell torch, however it comes in a stealth matt finish which gives a better grip for tactical applications. Boasting 524 lumens in high mode, the ML300LX has a beam range of 366 metres and is powered by two D cell batteries.

The Magligte ML300LX 3 D cell torch offers the same outputs and run-times as the Maglite ML300L 3 D cell torch, however it comes in a stealth matt finish which gives a better grip for tactical applications. Boasting 625 lumens in high mode, the ML300LX has a beam range of 406 metres and is powered by three D cell batteries.

The new Maglite 3 C cell ML50L updates the older 3 C cell model, now boasting 611 lumens in high mode a beam range of up to 339 metres. Five different functions of high, low, strobe, eco and momentary are available and are split into four function sets to select from.

The new Maglite ML50LX 3 C Cell offers the same outputs and run-times as the Maglite ML50L 3 C Cell torch, however it comes in a stealth matt finish and aggressive knurled design, which provides a better grip for tactical applications.

The NEBO Big Larry 2 is a 2 in 1 multi-functional unit that has a top light torch output of 200 lumens from a sible LED and a work light output of 500 lumens from the high power COB LED.

The Nebo Big Larry Pro is the rechargeable version of the Big Larry and produces 500 lumens of white light on the highest setting from the high power COB LED. Great for hands free use the Big Larry Pro has a strong magnet on the base of the torch, perfect for work on the car or in a workshop, a pop out pocket clip and the base can also stand freely on flat surfaces.

The NEBO Redline V is a compact and powerful torch, great for every day and professional use. The high power LED outputs an intensely bright beam of 500 lumens at maximum setting, with a beam distance of 170 metres.

The NEBO Slim is a thin, ergonomic rechargeable pocket light that outputs 500 lumens of intense bright light. Great for hands free use the Slim has a strong magnet on the base of the torch, which perfect for work on the car or in a workshop.

Offering five brightness levels, the Nitecore EA45S has maximum output of 1000 lumens using a Cree XP-L HI V3 LED. The die-cast body is manufactured using a casting method of injecting molten aluminium under high pressure into a mould cavity. This means no separate parts need to be welded or fastened together, ensuring the highest level of structural integrity with the head and the tube being an integral whole.

The EA8 Caveman was Nitecore's first torch to be powered by eight AA batteries, which provide extended run-times and an impressive maximum output of 900 lumens from the Cree XM-L U2 LED.

The new Nitecore EC20 is the latest addition to the Explorer series and represents outstanding value for money while outperforming torches that cost several times as much. The EC20 has a maximum brightness of 960 lumens from the Cree XM-L2 T6 LED and is powered by one 18650 rechargeable lithium-ion battery or two CR123A non-rechargeable lithium metal batteries.

The Nitecore EC21 utilises a Cree XP-G2 R5 LED for more balanced performance. The XP-G2 LED is capable of emitting a smaller, more focused and further reaching hotspot than the Cree XM-L2 LED, meaning it can illuminate an equal distance while using half the battery power. A secondary red LED can be used without compromising night adapted vision and also acts as a location beacon, flashing once every three seconds.

The Nitecore EC25 Cobra offers outstanding performance from 2 x CR123A (lithium primary) or 1 x 18650 (lithium-ion rechargeable) battery and provides an output of 860 lumens.

The Nitecore GEM10 is a professional gemstone identifier with infinitely variable brightness white light between 800 lumens and 1 lumen from a Cree XP-L HI V3 LED. There are various models in the GEM series for different stones and the GEM10 is best used for larger and raw gemstone inspection due to the wider head design and higher lumen output than the GEM8.

The Nitecore GEM8 is a professional gemstone identifier with infinitely variable brightness white light between 500 lumens and 1 lumen from a Cree XP-L HI V3 LED. There are various models in the GEM series for different stones and the GEM8 is best used for small gemstone inspection due to the narrow head design in which the LED is attached directly to the lens to ensure zero light loss.