Ledlenser P5R CORE Rechargeable LED Torch
Ledlenser P5R CORE Rechargeable LED TorchLedlenser P5R CORE Rechargeable LED TorchLedlenser P5R CORE Rechargeable LED Torch
Ledlenser P5R CORE Rechargeable LED TorchLedlenser P5R CORE Rechargeable LED TorchLedlenser P5R CORE Rechargeable LED Torch

Ledlenser P5R CORE Rechargeable LED Torch

Brand:  Ledlenser
Product Code:  502178

Availability:  

10 in stock
 
maximum allowance of 20 characters
£59.95
Save £10.00 (RRP £69.95)

The brand new CORE Series is here, and the P5R CORE is a rechargeable hand torch that offers a 10 seconds boost output with a maximum of 500 lumens, and a high constant output of 350 lumens.

The switch sits on the neck of the torch and the low profile rubberised button has comfortable and easy operation. The tail end unscrews to install the included Ledlenser 750 mAh 14500 lithium-ion battery with the positive end towards the head, and the tail cap can then be screwed back on as tight as it will go to ensure a good connection.

Once installed the battery can be charged inside the torch via the magnetic charging point located on the underside. Connect the magnetic end of the included cable to the charging point, and the standard USB at the other end plugs into a suitable USB port or adaptor. The LED indicator built into the button will glow red while charging is in progress and turn green to show charging is complete after approximately 2 hours for a full charge. The LED indicator also illuminates green, orange or red for 3 seconds when the torch is first turned on to display the remaining battery power.

One new feature is the 15 lumen back up mode, which is triggered when the battery level drops to 25% or below, and will run for a further 1 hour to ensure you are not left in the dark and give you chance to recharge the battery. Other new features included a memory mode that remembers the last used setting, a low power warning that blinks when the battery is low and emergency mode that automatically turns the light on in low when the power is cut while the torch is charging.

All these functions (excluding back up mode) can be turned on or off individually by holding the button down with the light turned on for 8 seconds until the button blinks twice. Then release the button and within 15 seconds either press the button once to toggle the memory mode, twice to toggle low power warning or three times to toggle emergency mode. The button will blink red twice or green twice to show the function has been turned on or off, depending whether it was on or off previously. The functions can also be reset by holding the button for a further 5 seconds after the initial 8 seconds and the button will blink red four times. Only one function can be changed at a time, so the process needs to be repeated to alter each function.

Smart light technology provides multiple modes of low, mid, high, boost, dim, blink, flashing, position, SOS and strobe that be be customised by the user to suit their needs. Only high mid, low and off are available as default and are cycled through by single presses of the button within 3 seconds of each other. If in any mode for longer than 3 seconds the next press will turn the light off rather than cycling to the next output. The boost output can be activated at any time by double pressing the button and will illuminate for 10 seconds before returning to the previous setting.

The light modes can be customised by holding down the button for 5 seconds while the light is on and the LED in the button will blink once to show customisable light modes has been accessed. You can then cycle through all 9 modes (excluding boost) and once you reach the mode you want to save first, simply press and hold the button for two seconds until the button blinks to indicate the mode has been saved. The light will revert back to the beginning of the 9 modes so you can go through and select the second mode you wish to save. Continue this process until you have as many or little modes in the order you require, and on the last output you wish to save press and hold the button for 4 seconds until the button blinks 3 times to indicate the customisation has been saved and exited.

An advanced focus system allows you to smoothly transition the light from spot to flood by twisting the bezel on the head of the torch. There is also a lock out mode to prevent accidental activation when not in use, which can be activated by holding the button for 5 seconds with the light off until the light blinks four times. To come out of lock out mode, hold the button for 5 seconds until the light blinks four times.

The P5R CORE has improved ingress protection thanks to the flex sealing technology, now offering a rating of IP68 making it fully resistant to solids and fully waterproof when submerged in water up to a depth of 1 metre for 30 minutes, which makes it perfect for everyday use and outdoor activities such as fishing, camping and hiking.

Product Features

Customisable modes and functions
Flicker free and focusable beam
Memory mode, emergency mode and back up mode
USB rechargeable with magnetic charging cable
Transportation lock out function to prevent accidental activation
Features low battery warning, battery status indicator & charging indicator

Operational Modes

Low: 15 lumens; 95 hours run-time; 40 m beam range
Mid: 130 lumens; 6 hours run-time; 110 m beam range
High: 350 lumens; 1 hour run-time; 180 m beam range
Boost: 500 lumens; 250 m beam range

Tested using the included 750 mAh 14500 lithium-ion rechargeable battery. These results may vary between torch, battery, environment and individual usage habits.


Technical Details

Type: Hand-held rechargeable torch
Operating Modes: Low / Mid / High / Boost / Dim / Blink / Flashing / Position / SOS / Strobe
Luminous Flux: Up to 500 lumens
Lamp: 1 x High power cool white LED
Colour Temperature: 6500 K
Colour Rendering Index: 70
Beam Range: Up to 250 m
Batteries Required: 1 x 14500 lithium-ion battery (included)
Charging Time: 2 hours
Overall Length: 123 mm
Head Diameter: 29 mm
Weight: 106 grams (including battery) 
Body Colour: Black
Body Material: Aircraft grade aluminium
Switch Type: Push button switch on the neck of the torch
Impact Resistance: 2 m
Environmental: Dust and waterproof to IP68 standard
Warranty: 2 years standard (7 years with product registration)
Regulatory Compliance: CE / RoHS


Packaging and Contents

Supplied in retail packaging and includes:
Ledlenser P5R CORE LED hand torch x 1
Ledlenser 750 mAh 14500 lithium-ion battery x 1
Magnetic USB charging cable x 1
Wrist lanyard x 1
Manual x 1

Compact USB Charger (2100 mA Output)

Compact USB Charger (2100 mA Output)

10+ in stock

This compact USB charger has a power output of 2100 mA, making it ideal for charging many devices that charge via a USB port.

[More details]
£5.95Add to Basket

Compact USB Car Charger Adaptor (2000 mA Output)

Compact USB Car Charger Adaptor (2000 mA Output)

10+ in stock

This USB car charger adaptor is so small and compact, so it won't be in the way when plugged in. Its output of 5 volts at 2000 mA makes it ideal for charging many devices that charge via a USB port.

[More details]
£4.95Add to Basket

Be the first to Write a Review for this item!

Receive a great FREE GIFT from Torch Direct

To qualify simply spend over £75 with us, on any one order, minus any delivery fees.
You will then receive an Silverpoint Hunter XL120RL LED Head Torch completely FREE!

Free gift offer from Torch Direct Ltd

Make it personal with our laser engraving service!

We charge £2.95 per engraving and all you have to do to obtain this service is complete the text form above with the text that you wish to be laser engraved. The text box is located just above the add to basket button, do this before adding your chosen product to your shopping basket.

You can chose to engrave a name, slogan or any text you want.

We are able to reproduce lowercase, uppercase, numbers and punctuation marks, and you may use a maximum of 20 characters per item. Please take great care when typing your chosen text as our system will capture, process, and replicate exactly what has been typed by you. Mistakes cannot be corrected after the engraving has been completed and refunds or exchanges will not be offered.

How do we engrave your product?

We use a top quality fibre laser engraving machine, which provides an accurate beam of laser light to mark your product perfectly and permanently.

Which typeface do we use for engraving and what size is it?

We use a typeface called 'Arial' for all our engraving as we find it gives the best results overall. Depending on which product is being engraved, our machine operators will adjust the text size to fit any available space.

Some samples from our engraving gallery (click to zoom)

If you would like to see more examples then please visit our Engraving Service page.

Customers Who Bought This Item Also Bought
Compact USB Car Charger Adaptor (2000 mA Output)

Compact USB Car Charger Adaptor (2000 mA Output)

10+ in stock

This USB car charger adaptor is so small and compact, so it won't be in the way when plugged in. Its output of 5 volts at 2000 mA makes it ideal for charging many devices that charge via a USB port.

[More details]
£4.95Add to Basket

Compact USB Charger (2100 mA Output)

Compact USB Charger (2100 mA Output)

10+ in stock

This compact USB charger has a power output of 2100 mA, making it ideal for charging many devices that charge via a USB port.

[More details]
£5.95Add to Basket