Fenix BC21R V3.0 Rechargeable LED Bike Light
Fenix BC21R V3.0 Rechargeable LED Bike Light is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
The Fenix BC21R V3.0 is a professional, rechargeable bicycle light for mountain and road cycling. It is suitable for long distance and high intensity riding, and capable of a maximum output of 1200 lumens on the turbo mode.
Utilising a single Luminus SST40 LED it provides a choice of four white brightness levels as well as a flashing mode, and has a maximum beam range of up to 142 metres. The proprietary reflector provides a broad flood beam that gives extra coverage to illuminate the peripheral, which is great for turning corners, and allows for better situational awareness.
Turn the torch on by holding the button on top for 0.5 seconds and then each press cycles through the modes of low, mid, high and turbo. Hold the switch for 0.5 seconds again to turn the light off. Flash is activated with the light on by double pressing the button, and a single press will exit flash. The last used setting except flash will be remembered next time the light is turned on.
The high quality Fenix handlebar mount features adjustable rubber shims to fit a wide range of handlebars and offers a quick detach function. It also allows for 15° horizontal adjustment and will be vertically locked at any angle. With both thick and shims it will fit handlebars between 22-28 mm, with just the thin shim it fits 28-32 mm and with no shims is fits 32-35 mm.
Included is a Fenix 18650 2600 mAh lithium-ion battery which charges inside the bike light via the USB-C charging port for faster charging. With the torch off, remove the dust cover from the USB-C port located on the front underside of the torch, and plug the included cable into the torch one end and the other end into a USB power source.
The LED charging indicator in the button will go red to indicate charging is in progress and will turn green once charging is complete after approximately 2 hours when charging the included battery. Once charging is complete remember to insert the dust cover properly and check the tail cap is tight to ensure the IP68 rating is maintained.
Alternatively you can use two CR123A non-rechargeable lithium metal batteries, however as these are not rechargeable do not attempt to charge the torch with this battery type inserted.
A built-in battery level indicator in the button displays the battery status for 3 seconds when the light is first turned on or when the button is pressed once while the light is off. It will show either a solid green, green flashing, solid red or red flashing light. A low battery voltage warning function is programmed to downshift to a lower brightness level when the voltage drops below the preset level. Once it reaches low output the indicator will constantly blink red to remind you to charge your battery.
Intelligent overheat protection will automatically downshift the brightness slightly if the internal temperature reaches 60°C or above in turbo mode, and once the torch has cooled it will allow the user to reselect the higher outputs.
A versatile light perfect for all your outdoor cycling adventures.
Easy, one handed operation
Quick attach and detach handlebar mount
Detachable shims for different size handle bars
Low battery indicator and low voltage indicator
Overheat protection downshifts brightness
Included battery charged internal via USB-C port
Low: 50 lumens; 33 hours run-time; 28 m beam range
Mid: 150 lumens; 11 hours run-time; 49 m beam range
High: 400 lumens; 6 hours, 30 minutes run-time; 80 m beam range
Turbo: 1200 lumens; 2 hours, 12 minutes run-time; 142 m beam range*
Flash: 400 lumens
Note: *The turbo mode is measured at total run-time including any reduced output levels due to the temperature regulation design.
Tested in laboratory conditions to ANSI/PLATO FL1 standard using 1 x Fenix ARB-L18-2600 18650 lithium-ion rechargeable battery under the temperature of 21±3°C and humidity of 50% - 80%. Results may vary between torch, battery and environments.
Type: LED cycle torch
Operating Modes: Turbo / High / Mid / Low / Flash
Luminous Flux: Up to 1200 lumens
Lamp Type: Luminus SST40 LED
Beam Range: Up to 142 m
Batteries Required: 18650 lithium-ion battery x 1
Lamp Measurements: 108 x 29 x 27 mm
Weight: 157 grams (including battery)
Body Colour: Grey
Body Material: Full metal housing - aluminium alloy
Switch Type: Push button
Impact Resistance: 1.5 m (lab tested)
Environmental: Waterproof to IP68 standard (2 m)
Warranty: 5 years (torch) / 1 year (battery)
Packaging and Contents
Supplied in retail packaging and includes:
Fenix BC21R V3.0 LED cycle torch x 1
Fenix 2600 mAh 18650 lithium-ion battery x 1
USB-C to USB-A charging cable x 1
Quick release bike mount x 1
Spare O-ring x 1
Instruction manual x 1