Ledlenser P7 CORE LED Torch
Ledlenser P7 CORE LED TorchLedlenser P7 CORE LED TorchLedlenser P7 CORE LED TorchLedlenser P7 CORE LED TorchLedlenser P7 CORE LED Torch

Ledlenser P7 CORE LED Torch

Brand:  Ledlenser
Product Code:  502180


13 in stock
maximum allowance of 20 characters
Save £10.00 (RRP £69.95)

The best selling Ledlenser P7 has been updated to the NEW Ledlenser P7 CORE, which has the same output of 450 lumens on the highest power setting but features a different look and feel in line with the new CORE series.

The redesigned tail switch has a tapered look and the low profile rubberised button has comfortable and easy operation. The tail end unscrews to reveal the battery carrier which is connected to the tail end. Four AAA alkaline batteries can then be inserted into the carrier and the tail switch can be screwed back on as tight as it will go to ensure a good connection.

A fully press of the tail switch will turn the light on and off, and if done quickly will cycle the brightness levels. The brightness level can also be selected with the torch off by softly pressing the tail switch in quick succession to cycle through high, mid, low and fully pressing the button in to select the desired output.

The Advanced Focus System allows you to smoothly focus the light from spot to flood by sliding the head of the torch forwards and backwards, with the beam reaching a maximum of 300 metres when focused into a spot.

A nylon lanyard is included for easy carrying.

Operational Modes

Low Power: 40 lumens; 25 hours run-time; 100 m beam range
Mid Power: 250 lumens; 2 hours run-time; 220 m beam range
Power: 450 lumens; 1 hours run-time; 300 m beam range

Technical Details

Type: Hand-held LED torch
Operating Modes: Low / Mid / High
Luminous Flux: Up to 450 lumens
Lamp: 1 x Cool white LED
Colour Temperature: 6500 K
Colour Rendering Index: 70
Beam Range: Up to 300 m
Focus: Spot to flood speed focus
Batteries Required: 4 x AAA alkaline (included)
Overall Length: 130 mm (defocused)
Head Diameter: 37 mm
Barrel Diameter: 29.5 mm
Weight: 175 grams
Body Colour: Black
Body Material: Aircraft grade aluminium
Switch Type: Tail cap push button
Impact Resistance: 1 m
Environmental: Water and dust resistant to IP54 standard
Warranty: 2 years standard (7 years with product registration)
Regulatory Compliance: CE / RoHS

Packaging and Contents

Supplied in retail packaging and includes:
Ledlenser P7 CORE LED torch x 1
Ledlenser AAA alkaline battery x 4
Wrist lanyard x 1
Manual x 1

Duracell Plus AAA Alkaline Batteries (Pack of 4)

Duracell Plus AAA Alkaline Batteries (Pack of 4)

94 in stock

Duracell Plus AAA batteries are multi-purpose alkaline batteries with up to 50% more power*, ideal for reliably powering everyday devices that require a kick of additional power.

[More details]
£2.95Add to Basket

Ledlenser Coloured Filter Set

Ledlenser Coloured Filter Set

For use with the Ledlenser P7, P7.2, P7R, T7.2, T7M, M7, M7R, M8, B7, l7, L7E, H14.2 and H14R.2

6 in stock

This Ledlenser filter set has four coloured filters comprised of red, green, blue and yellow.

[More details]
£8.95Add to Basket

Ledlenser Bike Mount (25 to  29.5 mm Body)

Ledlenser Bike Mount (25 to 29.5 mm Body)

On Order. Expected 15/12/2020

Bike mount designed for torches with a 25-29.5 mm body diameter only. Designed to fit the following Ledlenser torches: Police Tech Focus, Police Tech Focus FS, P7, P7.2, B7, T7, T7.2, M7, M8, MT7, T7M, M7R, M7RX, X7R, L5, L6, L7, L7E, E7, F1, V2 and V6.

Please Note: A torch is not included with this item

[More details]
£8.95RRP: £10.95

Ledlenser Gun Mount

Ledlenser Gun Mount

18 in stock

The Ledlenser gun mount is designed for use with torches and gun barrels that have a diameter of 25 - 34 mm.

[More details]
£7.95RRP: £8.80Add to Basket

Ledlenser Intelligent Belt Clip

Ledlenser Intelligent Belt Clip

19 in stock

Ledlenser Intelligent Belt Clip, perfect for hands free torch usage. Four different sizes available, please see full product description to see which options are available.

[More details]
£7.95RRP: £8.80Add to Basket

Ledlenser Intelligent Pouch

Ledlenser Intelligent Pouch

Suitable for use with the Ledlenser P7, P7.2, P7R, T7, T7.2, T7M, M7R, M7, and L7

3 in stock

The Ledlenser intelligent pouch not only securely holds and protects your torch, but also comes complete with four coloured filter lenses which can be used on the holster itself.

[More details]
£12.95RRP: £16.50Add to Basket

Yellow Signal Cone for the Ledlenser 7 Series

Yellow Signal Cone for the Ledlenser 7 Series

Fits the LED Lenser P7, P7.2, P7 2018, T7, T7.2, M7, M7R, MT7, B7

7 in stock

Ledlenser's yellow signal cone will transform your torch into a location beacon, making it easier to attract attention when needed. Useful for air traffic control, police, security or for an emergency.

[More details]
£4.95RRP: £5.50Add to Basket

Ledlenser Orange Signal Cone

Ledlenser Orange Signal Cone

11 in stock

Ledlenser orange signal cone for most of their hand held torches. Please see full product description to see which options are available.

[More details]
£3.25Add to Basket

Be the first to Write a Review for this item!

Receive a great FREE GIFT from Torch Direct

To qualify simply spend over £75 with us, on any one order, minus any delivery fees.
You will then receive an Silverpoint Hunter XL120 LED Head Torch completely FREE!

Free gift offer from Torch Direct Ltd

Make it personal with our laser engraving service!

We charge £2.95 per engraving and all you have to do to obtain this service is complete the text form above with the text that you wish to be laser engraved. The text box is located just above the add to basket button, do this before adding your chosen product to your shopping basket.

You can chose to engrave a name, slogan or any text you want.

We are able to reproduce lowercase, uppercase, numbers and punctuation marks, and you may use a maximum of 20 characters per item. Please take great care when typing your chosen text as our system will capture, process, and replicate exactly what has been typed by you. Mistakes cannot be corrected after the engraving has been completed and refunds or exchanges will not be offered.

How do we engrave your product?

We use a top quality fibre laser engraving machine, which provides an accurate beam of laser light to mark your product perfectly and permanently.

Which typeface do we use for engraving and what size is it?

We use a typeface called 'Arial' for all our engraving as we find it gives the best results overall. Depending on which product is being engraved, our machine operators will adjust the text size to fit any available space.

Some samples from our engraving gallery (click to zoom)

If you would like to see more examples then please visit our Engraving Service page.