Please note that all orders placed now will leave our warehouse on Tuesday 28th May 2024 due to the bank holiday

Home Torches Key Ring Torches Xtar T1 White & UV Rechargeable LED Key Ring Torch
Xtar  |  SKU: XTAR-T1-UV

Xtar T1 White & UV Rechargeable LED Key Ring Torch

£29.94

The Xtar T1 UV is a lightweight, rechargeable key ring torch that has a maximum output of 500 lumens primary white light from a Cree XP-G3 LED and also features a side panel UV auxiliary setting with 3 UV LEDs.

The auxiliary output is an ultraviolet LED with a wavelength of 365~370 nm, which is useful for a range of tasks including detecting fraudulent money and ID cards as well as verification mark reading, UV ink reading, Smart Water and SelectaDNA.

Five main white brightness levels are available, as well as the UV setting and strobe, all of which are controlled by a single push button. To access the main white output, single press the button to turn the light on and then single press to cycle through moonlight, low, mid, high, strobe and hold the button to turn the light off. Momentary access to turbo is possible by holding the button down while the light is off, and will turn off once the button is released or automatically after 30 seconds to prevent overheating.

Double press the button in any state to access the UV auxiliary setting and either hold the button down to turn the light off or single press the button to go back to the main white light. In white mode the last used setting will be recalled next time the light is turned back on (excluding strobe).

The integrated rechargeable lithium polymer battery is charged via a USB-C charging port on the side of the torch for fast charging and once connected to a power USB power source using the included short cable a charging indicator under the switch will illuminate red to show charging is in progress, and turn green once charging is complete after approximately 30 minutes.

A solid ring pull design allows for attachment of keys using the included carabiner style key ring clip.

Operational Modes

Moonlight: 2 lumen; 4 hours, 3 minutes run-time
Low: 50 lumens; 1 hour, 49 minutes run-time
Mid: 150 lumens: 52 minutes run-time
High: 300 lumens; 19 minutes run-time
Turbo: 500 lumens; 9 minutes*
Ultraviolet: 0.5 lumens; 28 minutes run-time

Note: *This is an accumulative run-time as the turbo can only be used in 30 seconds bursts to prevent overheating.


Technical Details

Type: Key ring LED torch
Operating Modes: Moonlight / Low / Mid / High / Strobe / UV
Luminous Flux: Up to 500 lumens (main light)
Lamp Type: 1 x white Cree XP-G3 LED / 1 x UV LED
UV wavelength: 365~400 nm
Batteries Required: Built-in lithium polymer battery
Charging time: 30 minutes
Overall Length: 57.6 mm
Head Diameter: 15.8 mm
Weight: 18.5 grams
Body Colour: Dark grey
Body Material: Aluminium alloy
Impact Resistance: 1.5 m
Warranty: 2 years


Packaging and Contents

Supplied in retail packaging and includes:
Xtar T1 UV LED key ring torch x 1
USB-C to USB-A charging cable x 1
Key ring x 1
Manual x 1


Xtar T1 White & UV Rechargeable LED Key Ring Torch
Xtar

Xtar T1 White & UV Rechargeable LED Key Ring Torch

£29.94

The Xtar T1 UV is a lightweight, rechargeable key ring torch that has a maximum output of 500 lumens primary white light from a Cree XP-G3 LED and also features a side panel UV auxiliary setting with 3 UV LEDs.

The auxiliary output is an ultraviolet LED with a wavelength of 365~370 nm, which is useful for a range of tasks including detecting fraudulent money and ID cards as well as verification mark reading, UV ink reading, Smart Water and SelectaDNA.

Five main white brightness levels are available, as well as the UV setting and strobe, all of which are controlled by a single push button. To access the main white output, single press the button to turn the light on and then single press to cycle through moonlight, low, mid, high, strobe and hold the button to turn the light off. Momentary access to turbo is possible by holding the button down while the light is off, and will turn off once the button is released or automatically after 30 seconds to prevent overheating.

Double press the button in any state to access the UV auxiliary setting and either hold the button down to turn the light off or single press the button to go back to the main white light. In white mode the last used setting will be recalled next time the light is turned back on (excluding strobe).

The integrated rechargeable lithium polymer battery is charged via a USB-C charging port on the side of the torch for fast charging and once connected to a power USB power source using the included short cable a charging indicator under the switch will illuminate red to show charging is in progress, and turn green once charging is complete after approximately 30 minutes.

A solid ring pull design allows for attachment of keys using the included carabiner style key ring clip.

Operational Modes

Moonlight: 2 lumen; 4 hours, 3 minutes run-time
Low: 50 lumens; 1 hour, 49 minutes run-time
Mid: 150 lumens: 52 minutes run-time
High: 300 lumens; 19 minutes run-time
Turbo: 500 lumens; 9 minutes*
Ultraviolet: 0.5 lumens; 28 minutes run-time

Note: *This is an accumulative run-time as the turbo can only be used in 30 seconds bursts to prevent overheating.


Technical Details

Type: Key ring LED torch
Operating Modes: Moonlight / Low / Mid / High / Strobe / UV
Luminous Flux: Up to 500 lumens (main light)
Lamp Type: 1 x white Cree XP-G3 LED / 1 x UV LED
UV wavelength: 365~400 nm
Batteries Required: Built-in lithium polymer battery
Charging time: 30 minutes
Overall Length: 57.6 mm
Head Diameter: 15.8 mm
Weight: 18.5 grams
Body Colour: Dark grey
Body Material: Aluminium alloy
Impact Resistance: 1.5 m
Warranty: 2 years


Packaging and Contents

Supplied in retail packaging and includes:
Xtar T1 UV LED key ring torch x 1
USB-C to USB-A charging cable x 1
Key ring x 1
Manual x 1

View product