NEBO Franklin Twist Rechargeable LED Torch, Lantern & Work Light
NEBO Franklin Twist Rechargeable LED Torch, Lantern & Work LightNEBO Franklin Twist Rechargeable LED Torch, Lantern & Work LightNEBO Franklin Twist Rechargeable LED Torch, Lantern & Work Light
NEBO Franklin Twist Rechargeable LED Torch, Lantern & Work LightNEBO Franklin Twist Rechargeable LED Torch, Lantern & Work LightNEBO Franklin Twist Rechargeable LED Torch, Lantern & Work Light

NEBO Franklin Twist Rechargeable LED Torch, Lantern & Work Light

Brand:  NEBO
Product Code:  NEB-FLT-0024-G

Availability:  

2 in stock
 
max allowance of 20 characters
£29.95

The Nebo Franklin Twist is a rechargeable 3 in 1 unit capable of being used as a torch, work light or lantern with it's innovative concealed Arcus COB LED.

The torch has a white LED with a maximum output of 400 lumens that comes out the front of the Franklin Twist like a normal handheld torch, and the 4x zoom allows the light to be adjusted from flood to spot by sliding the head of the torch forwards. The concealed work light and lantern uses COB LED technology offering 75 lumens and 200 lumens respectively on the highest white brightness setting. Twisting the head of the torch will reveal the COB LED which lights up 120° in the work light mode for forward facing directional light, or the full 360° in lantern mode for all round illumination.

Powered by a tailored 2000 mAh 18650 lithium-ion battery, the torch has a run-rime of up to 2 hours, on the highest torch output. The battery is charged inside the torch via the micro USB port which is on the back of the torch and revealed by lifting the dust cover. The supplied cable is plugged into the micro USB port and then connected to a USB power source with the USB-A end of the cable. The charging indicator glows red while charging is in progress and turns blue once charging is complete.

All the functions are controlled by red the button located on the side of the unit, and are all dimmable between 100%-10% output. With the COB LED concealed a single press will turn the torch on and off, or with the COB LED revealed presses with cycle through torch, work light and lantern. When the light is turned on the in any of these outputs simply hold down the button and the brightness will gradually begin to dim before then getting brighter again. Release the button at the desired output for the task at hand.

As work light comes from one side of the body with a 120° angle, it is useful when combined with the magnetic base, as you can magnetise it to a vertical magnetic surface and the light would be facing downwards into your work area, or alternatively it can be stood up on a flat surface facing towards the desired area for hands free lighting also. A retractble pocket clip can be pulled out to attached to clothing, backpacks etc. and when not in use slots back in the body for a streamline finish.

The torch as default will always come back on at the highest output, however the light can be programmed to remember an output of your choice so that when you next turn the light on it will come on at your memorised brightness.

Note: The torch will be in demo mode which turns the light off after 8 seconds, to disable this remove the battery upon receipt and leave it out for 10 seconds before reinserting and fully tightening the tail cap.

Operational Modes

Torch High High: 400 lumens; 2 hours run-time; 89 m beam range
Torch Low Low: 40 lumens; 20 hours run-time; 28 m beam range
Work Light 120° High: 75 lumens; 10 hours run-time; 11 m beam range
Work Light 120° Low: 100 lumens; 26 hours run-time; 4 m beam range
Lantern 360° High: 200 lumens; 2 hours run-time; 13 m beam range
Lantern 360° Low: 20 lumens; 13 hours run-time; 4 m beam range


Technical Details

Type: Rechargeable LED torch, work light & lantern
Operating Modes: Adjustable Torch / work light / Lantern
Luminous Flux: Up to 400 lumens
Beam Range: Up to 89 m
Lamp Type: 1 x white LED / C.O.B. LED
Batteries Required: Tailored 18650 Lithium-ion battery (included)
Overall Length: 177.8 mm
Head Diameter: 45.7 mm
Weight: 230 grams approx.
Body Colour: Grey
Material: Aircraft grade anodised aluminium
Environmental: Water resistant to IPX4 standards
Warranty: 2 years
Regulatory Compliance: CE / RoHS


Packaging and Contents

Supplied in retail packaging and includes:
Nebo Franklin Twist LED torch x 1
Micro USB charging cable x 1
Manual x 1

Compact USB Charger (2100 mA Output)

Compact USB Charger (2100 mA Output)

14 in stock

This compact USB charger has a power output of 2100 mA, making it ideal for charging many devices that charge via a USB port.

[More details]
£5.95Add to Basket

Dual USB Mains Adaptor (2 x 1200 mA Output)

Dual USB Mains Adaptor (2 x 1200 mA Output)

Two USB ports capable of producing 1200 mA output per socket.

25 in stock

This dual USB mains adaptor has a power output of 1200 mA per USB socket, making it ideal for charging many devices that charge via a USB port. The two USB ports make it ideal for charging phones, as you can charger two at once and only take up one plug socket.

[More details]
£7.95Add to Basket

Be the first to Write a Review for this item!

Make it personal with our laser engraving service!

We charge £3.95 per engraving and all you have to do to obtain this service is complete the text form above with the text that you wish to be laser engraved. The text box is located just above the add to basket button, do this before adding your chosen product to your shopping basket.

You can chose to engrave a name, slogan or any text you want.

We are able to reproduce lowercase, uppercase, numbers and punctuation marks, and you may use a maximum of 20 characters per item. Please take great care when typing your chosen text as our system will capture, process, and replicate exactly what has been typed by you. Mistakes cannot be corrected after the engraving has been completed and refunds or exchanges will not be offered.

How do we engrave your product?

We use a top quality fibre laser engraving machine, which provides an accurate beam of laser light to mark your product perfectly and permanently.

Which typeface do we use for engraving and what size is it?

We use a typeface called 'Arial' for all our engraving as we find it gives the best results overall. Depending on which product is being engraved, our machine operators will adjust the text size to fit any available space.

Some samples from our engraving gallery (click to zoom)

If you would like to see more examples then please visit our Engraving Service page.

Receive a great FREE GIFT from Torch Direct

To qualify simply spend over £50 with us, on any one order, minus any delivery fees.
You will then receive a Mercury FL05C 5 W Cree LED Torch completely FREE!

Free gift offer from Torch Direct Ltd
Customers Who Bought This Item Also Bought