Olight Warrior X 3 Rechargeable LED Torch

The Olight Warrior X 3 is the upgraded version of the Warrior X Pro, that still retains the revolutionary design such as the vibration battery indicator, aggressive appearance, silicon tactical ring and the option to use a magnetic remote switch, but also brings some upgrades to the table.

Now utilising a high performance cool white LED (6500K), the output has increased to 2500 lumens on turbo (drops to 1000 lumens after 2.5 minutes use) and the upgraded design incorporates a rugged stainless steel bezel with three zirconium beads inlaid for glass breaking in an emergency or as a defensive tool.

It still connects to a remote pressure switch magnetically (pressure switch not included), however it has been updated to be compatible with a push and lock system which provides a sturdier attachment. If all that wasn't enough already, the warrior X 3 still features the innovative low battery level warning function in the form of a subtle vibration within the torch, rather than a light, making it much more stealthy.

The low power vibration feature will notify you at the following power levels:
Power ≤20% - vibrate once every 5 minutes
Power ≤10% - vibrate once per minute
Power ≤5% - vibrate once every 10 seconds

The customised 5000 mAh 21700 lithium-ion battery is recharged inside the torch using the included MCC3 magnetic charging cable.

Simply connect the magnet to the base of the Warrior X 3 and plug the USB end into a suitable USB adaptor (5 V 2 A recommended for fastest charging). The indicator light on the magnet will go red while charging is in progress and turn green once charging is complete after approximately 5 hours, 30 minutes if the power supply is sufficient enough to support the 2 A output, otherwise the cable will output at a lower rate or 1 A or 1.5 A depending on the power supply.

Two modes of low and high are available which are controlled using the tactical tail switch. The tail switch will access constant low with a quick half press, or momentary low with a half press and hold. Constant high is accessed with a quick deep press or momentary high is activated with a deep press and hold. Single press the button again to turn the torch off.

A tactical Warrior ring comes fitted on the torch, which features a finger loop to provide a secure grip in tactical use and a strike tip on the edge, or if you prefer you can remove the aluminium warrior ring and put the included silicone tactical grip ring in it's place, which offers a similar function but is more comfortable to use for some. Unscrew the tail cap, lift off the warrior ring, then simply slide the silicone grip over the end with the wider side first and once fully pushed down screw the tail cap back on.

Included for easy carry is a sturdy nylon holster with a stitched belt loop, a D ring and also a strap that uses a pop stud which could be threaded through a molle vest strap if desired. What makes this holster extra special is the strong magnetic closure, which keeps the torch securely in the pouch, but is also easy to gain access to when required.

Made from aluminium alloy, the Warrior X 3 easily withstands the 2 m drop test, and as with most Olight torches, it also has an IPX8 waterproof rating.

Product Features

Heavy duty build
Metal tail switch that won't wear down like a rubber switch
Larger heat sinking rings on the head for efficient heat dissipation
Silicone retainer ring  and warrior ring for better grip on the light
Magnetic tail cap charging and remote switch attachment
Glass breaking tips and low battery vibration warning

Operational Modes

High:
2500 lumens; 2 minutes, 30 seconds run-time; 560 m beam range
1000 lumens; 2 hour, 9 minutes run-time
300 lumens; 33 minutes run-time

Low:
300 lumens; 8 hours run-time; 195 m beam range

Tested indoors under windless conditions using the included battery. Results may vary between torch, environment and usage.

Please note: *The high setting after 2.5 minutes run-time will decrease to 1000 lumens to protect the LED from overheating, and will drop again after 1 hour, 40 minutes.

Technical Details

Type: Tactical hand torch
Operating Modes: Low / High
Luminous Flux: Up to 2500 lumens
Lamp Type: High power cool white LED
Reflector System: Smooth reflector
Beam Range: Up to 560 m
Batteries Required: Olight customised 5000 mAh 21700 lithium-ion
Overall Length: 149 mm
Head Diameter: 39 mm
Barrel Diameter: 26.2 mm
Weight: 255 grams (including battery & warrior ring)
Colour: Black body with blue bezel or Desert Tan
Body Material: Aluminium alloy
Body Finish: Type III hard anodised
Switch Type: Tail cap push button
Impact Resistance: 2 m
Environmental: Waterproof to IPX8 standard (2 m)
Warranty: 5 years (torch), 1 year (battery)

Packaging and Contents

Supplied in a retail packaging and includes:
Olight Warrior X 3 LED torch x 1
Olight customised 5000 mAh 21700 lithium-ion battery x 1
MCC3 USB magnetic charging cable x 1
Metal tactical warrior ring (fitted) x 1
Silicone tactical grip ring x 1
Holster x 1
Manual x 1