The Unilite PS-HDL6R provides a maximum output of 350 lumens white light from the six Samsung SMD LEDs in the highest setting.
Four settings of high, mid, low and flash are available and are cycled through with quick single presses of the push button that is located on top of the head torch and revealed by sliding down the anti-dazzle shield. The fifth press will turn the light off or if left in any mode for longer than 3 seconds the next press will turn the light off.
The PS-HDL6R can be powered two ways with either the included 3.7 V 1800 mAh li-polymer battery pack or using three AAA batteries (not included) that are inserted into a rectangular AAA battery case before going in the head torch. If using the li-polymer battery back the AAA battery holder has to be removed from the head torch first.
The li-polymer battery pack can be recharged using the included USB cable via the micro USB port on the side of the battery pack. A red LED will illuminate to indicate charging is in progress and it will turn green once charging has completed. A full charge takes approximately 4 hours.
A LED power indicator on the side of the head torch will show how much battery power remains so that you're never left in the dark. A blue light means more than 30% power, a red light means 30%-5% power and a flashing red light means less than 5% power.
As well as the adjustable headband, the PS-HDL6R also includes a bracket with a 3M adhesive pad on the back so that you can attach the head torch unit to an industrial helmet or a sports helmet. The head can be tilted forwards up to 45° so you can direct the light where needed and the anti-dazzle shield can also be pulled forward which will angle the beam downwards and not shine in anyone's eyes - useful if you are doing up close work with someone.
Easy push button switch
Dual power options
Helmet mountable with adhesive pad
Fluorescent body design for high visibility
Rubberised Non-Slip Headbands for increased durability
1800 mAh li-polymer battery pack:
High: 350 lumens; 4 hours, 30 minutes run-time; 27 m beam range
Mid: 140 lumens; 7 hours run-time, 30 minutes; 16 m beam range
Low: 30 lumens; 47 hours run-time; 6 m beam range
Flash: 8 hours run-time
3 x AAA alkaline batteries:
High: 350 lumens; 3 hours run-time; 27 m beam range
Mid: 140 lumens; 7 hours run-time; 16 m beam range
Low: 30 lumens; 59 hours run-time; 6 m beam range
Flash: 7 hours, 30 minutes run-time
Operating Modes: High / Mid / Low / Flash
Luminous Flux: Up to 350 lumens
LED: 6 x Samsung SMD white LEDs
Focus: Fixed focus
Beam Range: Up to 27 m
Batteries Required: 1 x li-polymer battery pack (included) or 3 x AAA (not included)
Run Time: Up to 59 hours (low)
Charging time: 4 hours approx.
Dimensions: 50 x 65 x 45 mm
Weight: 94 grams (including batteries and battery case)
Switch Type: Push button
In-Built Technology: High visibility technology
Environmental: Water resistant to IPX6 standard
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in Retail Packaging and Includes:
Unilite PS-HDL6R head torch x 1
Non-slip headband x 1
3.7 V 1800 mAh li-polymer battery pack x 1
Micro USB charging cable x 1
3M adhesive helmet bracket x 1
Manual x 1