Pressure Switches

The Fenix AER-02 tactical remote pressure switch replaces the tail cap of your Fenix torch and provides a cable mounted pressure pad and switch. The noiseless pressure pad measures 30 mm long and provides momentary operation of your torch by applying slight finger pressure, once pressure is released the torch turns off.

The Fenix AER-03 tactical remote pressure switch replaces the tail cap of your Fenix torch and provides a cable mounted pressure pad and switch. The noiseless pressure pad measures 30 mm long and provides momentary operation of your torch by applying slight finger pressure, once pressure is released the torch turns off. A round switch activates constant illumination of your torch, great for night time navigation.

The Ledlenser remote pressure switch is designed for use with the P7, P7.2, T7.2 or T7M and once connected, it allows the torch to be operated by using the pressure pad switch.

The Ledlenser remote pressure switch type D is designed for use with the Ledlenser MT10. Once the pressure switch is plugged in the torch can then be operated using the pad that has two buttons; one for momentary illumination and one to turn the torch on constantly.

The Ledlenser remote pressure switch type E is designed for use with the Ledlenser MT14. Once the pressure switch is plugged in the torch can then be operated using the pad that has two buttons; one for momentary illumination and one to turn the torch on constantly.

The Nitecore remote pressure switch is designed for several torches from the Nitecore range and once connected, it allows the torch to be operated by using the pressure pad switch.

The Nitecore RSW2 remote pressure switch is designed for the Nitecore precise series models P10, P20 and P20UV. Once connected, it allows the torch to be operated by using the pressure pad switch. Three sensor pads provide momentary activation and a separate pad provides constant activation and needs to be pressed again to turn the light off.

The Nitecore RSW2D remote pressure switch is designed for the Nitecore P12GTS, MH12GTS and MH25GTS, or Nitecore torches with a 26 mm tail diameter and a double layered tube.

This Olight RM1X remote pressure switch is designed for the Olight M1X Striker LED torch. Once connected, it allows the torch to be operated by using the pressure pad switch.

This remote pressure switch is designed for the Olight M20SX Javelot and the M20SX Warrior LED torch models. Once connected, it allows the torch to be operated by using the pressure pad switch.

This remote pressure switch is designed for the Olight M23 Javelot, M3XS-UT and M2X-UT LED torch models. Once connected, it allows the torch to be operated by using the pressure pad switch.

This remote pressure switch is designed for the Olight M2R Warrior LED torch. Once connected, it allows the torch to be operated by using the pressure pad switch.

This remote pressure switch is designed for the Olight Warrior X and Javelot Pro and is the world's first magnetic remote control pressure switch.