The Nitecore TM38 Lite has a maximum output of 1800 lumens from a Cree XHP35 HI D4 LED that is set in a deep polished reflector for an astonishing maximum range of 1400 metres, which is a 300 metre increase on it's predecessor the TM36 and the beam intensity has also increased by 160%.
It is powered by four 18650 lithium-ion rechargeable batteries (not included) that can be charged inside the TM38 Lite by plugging the included mains cable into the charging port on the head of the torch. Alternatively the Nitecore NBP68HD rechargeable battery pack can be purchased separately and screws directly onto the head of the torch in place of the 18650 battery section.
An integrated OLED display allows the user to quickly and easily see the lumen output, brightness setting, beam distance, battery voltage, battery level, remaining run-time and even the temperature of the torch. The OLED display will automatically show these readings when the torch is turned on and then will remain off until you press the small button next to the display to cycle through them.
The light is operated by a single dual stage switch (patented) for easy one handed operation. Two modes are available and are selected according to how far you press the switch. From off, pressing the switch half way and releasing within one second will activate daily mode and pressing it all the way down and releasing within one second will activate search mode. Alternatively holding the switch down, while the light is off, either halfway or all the way for longer than one second will provide momentary illumination and the light will go off when the switch is released.
Once in daily mode half presses of the switch will cycle through ultra-low, low, mid and high. Holding the switch halfway for more than one second will provide instant access to strobe. Once is search mode half presses of the switch will cycle between high and turbo. With the torch on two gull presses in quick succession will enter the special modes and half presses will cycle through strobe, SOS and location beacon.
When the light is on, fully press the switch and release within one second to turn the light off and put in standby mode. When in standby mode the torch will consume small amounts of power to maintain the micro control unit and the power indicator will blink once every two seconds to indicate the location of the torch. The torch can be fully turned off by loosening the battery pack from the head of the torch.
Other features include an integrated power indicator in the switch, a tripod mounting port, which allows the TM38 Lite to be set on a standard tripod, a shoulder carry strap to free up your hands and a built-in thermal protection circuit.
Thermal protection circuit prevents overheating
Intelligent charging circuit with security detection charges safely and rapidly
Eight rapidly switchable brightness levels and modes to select from
Innovative single button two-stage switch offers versatile functionality (Patented)
Integrated power indicator light displays remaining battery power (patented)
Optimal heat dissipation to improve overall performance
Precision digital optics technology provides extreme reflector performance
Turbo: 1800 lumens; 2 hours run-time*
High: 800 lumens; 5 hours, 30 minutes run-time
Mid: 400 lumens; 11 hours run-time
Low: 200 lumens; 20 hours run-time
Ultra Low: 50 lumens, 60 hours run-time
Note: *The thermal protection will automatically lower the output of the torch if the internal temperature reaches 60°C or higher to prevent the torch from overheating and to protect the LED, therefore this is an accumulated run-time. Do not attempt to cool a heated torch by submerging it in water as this could cause irreparable damage.
Type: Search and rescue LED torch
Operating Modes: Ultra-low / Low / Mid / High / Turbo / Strobe / SOS / Location Beacon
Luminous Flux: Up to 1800 lumens
Lamp Type: Cree XHP35 HI D4 LED
Beam Range: 1400 m
Batteries Required: 4 x 18650 li-ion batteries or Nitecore NBP68HD battery pack (not included)
Run Time: Up to 60 hours (ultra low setting)
Overall Length: 195 mm
Head Diameter: 90 mm
Barrel Diameter: 50 mm
Weight: 780 grams (excluding batteries)
Body Colour: Black
Body Material: Constructed from aerospace grade aluminium alloy
Body Finish: HA III military grade hard anodised
Window Type: Toughened ultra-clear mineral glass with anti-reflective coating
Switch Type: Side mounted push button
Impact Resistance: 1 m
Environmental: Waterproof to IPX8 standard (2 m)
Warranty: 5 years
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in a retail box and contains:
Nitecore TM38 Lite LED torch x 1
Shoulder strap x 1
Wrist lanyard x 1
Spare O-ring x 1
Spare dust cover for charging port x 1
UK mains charger x 1
Manual x 1