Search Results

The Energizer CR123A offers long lasting performance in every device that it powers whether it is a torch, camera, or a high tech gadget. This battery is ideal for many brands of torch on the market including Fenix, Olight, Nitecore, Ledlenser, Xtar etc.

The Energizer Waterproof 2 cell AA LED torch offers an output of 55 lumens and can go underwater up to a depth of 1 metre for 30 minutes. The Waterproof 2AA is powered by two AA alkaline batteries and is turned on and off with the large push button located on the neck of the torch.

The Energizer Vision head torch is lightweight and easy to use, perfect for everyday tasks.

The Energizer Vision HD head torch is lightweight and easy to use, with a maximum output of 300 lumens.

The Energizer Tac 700 is tough and ready for action with a maximum out of 700 lumens on the highest setting. Three brightness levels of high, mid and low are available and the outputs are cycled through with the tail cap push button.

The Energizer Touch Tech key ring torch has an output of 20 lumens and can shine up to 10 metres. It provides a momentary on function and uses a buttonless touch tech technology.

For the most demanding tasks, look no further than the Energizer Hard Case Pivot Plus. The main feature of this torch is the pivoting head which can be rotated within a 175° angle so that you can aim the light just where you need it the most.

For the most demanding tasks, look no further than the Energizer® Hard Case® Pro Project Plus. With tool-quality construction and advanced LED technology, this light is designed to meet even the most challenging jobs. A maximum output of 400 lumens is possible and the light can also be dimmed right down to 40 lumens by holding down the button.

The Energizer Vision HD+ head torch is lightweight and compact, with a maximum output of 350 lumens. The Vision HD+ has three lighting modes that all feature a dimming capability and a red mode. [More details]

The Energizer Vision Ultra head torch is lightweight and compact, with a maximum output of 450 lumens.

The Energizer® Hard Case® Pro rugged head torch is designed with a tool quality construction and advanced LED technology to meet the most demanding jobs. A maximum output of 325 lumens is possible and the light also has a low output of 110 lumens.

The Energizer Vision HD+ Focus head torch is lightweight and compact, with a maximum output of 400 lumens. The Vision HD+ Focus has three lighting modes from a total of five LEDs. The middle white LED provides a wide flood beam, while the two white side LEDs are focused inwards to emit a narrow spot beam.

The Energizer Vision Ultra rechargeable head torch is lightweight and compact, with a maximum output of 400 lumens. The Vision Ultra has four white lighting modes that all feature a dimming capability and also features red light, red flashing and green light modes.

The Energizer Vision HD metal is a sturdy rechargeable torch that can produce a maximum output of 1000 lumens from three white LEDs.

The Fenix SE10 is an intrinsically safe torch for use in locations that are at risk of explosion (excluding underground mines). It uses a Cree XP-E2 R3 LED to provide a single output of 100 lumens. It conforms to the ATEX directive which is internationally recognised. Made from explosion proof and anti-static plastics, this torch can be used in an atmosphere of flammable gas zones 0-2 and atmosphere of flammable dust zones 20-22.

The Fenix WF05E is an intrinsically safe torch for use in locations that are at risk of explosion (excluding underground mines) and it has passed the necessary tests and was certified by IECEx, ATEX and CSA.

The Fenix WF11E is an intrinsically safe torch for use in locations that are at risk of explosion and it has passed the necessary tests and was certified by IECEx, ATEX and CSA.

The Unilite ATEX-FL4 is an intrinsically safe torch that uses a high quality Cree LED to deliver 150 lumens of bright white light. The industrial strength polycarbonate body, AR coated toughened glass lens and rubberised head and handle grips makes this torch the ultimate robust and reliable safety torch for use in in even the most arduous environments.

The LED Lenser iL7 intrinsically safe torch is ATEX Zone 2/22 compliant and uses a high quality LED to deliver 340 lumens of white light. The industrial strength polycarbonate body features a removable pocket clip so that it can be easily carried on a shirt pocket or on a trouser pocket.

The LED Lenser iLH8 is an intrinsically safe head torch for use in ATEX zone 2/22 locations and has an output of 280 lumens using a white LED. The iLH8 is powered by three AA alkaline batteries which are fitted by unscrewing the side of the battery compartment on the rear of the head band, removing the battery carrier and then inserting the batteries into the carrier as indicated by the + and - at the ends of each battery slot.

With an impressive light output of 20 lumens, a rubberised pocket clip and easy-to-clean stainless steel construction the Coast A9 Inspection LED torch is the ultimate pen light for technicians, and anyone else needing a great inspection light.

The ATEX-PL1 is a compact intrinsically safe penlight that delivers 65 lumens of bright white light from a single Cree LED.

The Ledlenser EX4 is an intrinsically safe torch is ATEX Zone 0 / 20 compliant and uses a high quality LED to deliver 50 lumens of white light.

The LED Lenser iL4 intrinsically safe torch is ATEX Zone 2/22 compliant and uses a high quality LED to deliver 80 lumens of white light. The iL4 is powered by two AAA alkaline batteries which are fitted by unscrewing the head of the torch

The Maglite XL200 has been updates and now delivers 230 lumens of white light on the highest setting, with a beam range of up to 163 metres. The tactical tail switch allows the user to cycle through the five functions of variable brightness, variable strobe, Nite Lite™ mode, signal mode and SOS mode.

The Unilite PS-HDL2 can provide a maximum of 200 lumens of white light from the central Cree LED when in the highest setting.

The Unilite ATEX-RA2 is an intrinsically safe hand torch for use in hazardous locations and has an output of 350 lumens from a Cree LED. Rather than facing forwards on the end of the torch like a regular hand torch, the light is positioned at a 90° angle, so that for example, if you need to inspect the inside of a small unit you could easily do so without having to hold the torch horizontal to be able to get the light where you need it.

The Coast EAL12 lantern runs off of 4 x AA batteries and offers up to 38 hours of run time in low mode and delivers a maximum of 168 lumens of white light at full power. It also has red LEDs that can be turned on to provide light but still preserve your eye's natural night vision or you can activate flashing mode to signal for help.

The Coast EAL17 lantern runs off of 4 x D cell batteries and offers up to 50 hours of run time in low mode and delivers a maximum of 460 lumens of white light at full power. It also has red LEDs that can be turned on to provide light but still preserve your eye's natural night vision or you can activate flashing mode to signal for help.

The LED Lenser EX7R intrinsically safe torch is ATEX Zone 1/21 compliant and uses a high quality LED to deliver 220 lumens of white light. The industrial strength polycarbonate body features a removable pocket clip so that it can be easily carried on a shirt pocket or on a trouser pocket.

The LED Lenser EXH8R is an intrinsically safe head torch for use in ATEX zone 1/21 and has an output of 200 lumens using a white LED. The EXH8R is powered by a lithium-ion cell which is sealed in a battery pack design for safety purposes.

The Ledlenser H8R offers a maximum output of 600 lumens white light from a single Xtreme LED and also has a red light on the back of the head torch for increased viability. There are two lighting modes available giving the user a choice of how the brightness settings are cycled through.

The popular M17R just got even better with the new upgraded i17R. Still featuring the output selector ring design and floating charging as before, but now with a higher 1000 lumens output, and as it is part pf the Industrial series it has the signature yellow detailing to make it stand out.

The Ledlenser i6ER rechargeable penlight is a variation on the i6R, offering a reduced output of 60 lumens in order to be run-time optimised with 8 hours run-time on high.

The Ledlenser i6R is a slimline, rechargeable penlight offering a maximum output of 120 lumens and a beam range of up to 100 metres on the highest setting.

The Ledlenser i7 is a tough, compact hand torch offering a maximum output of 220 lumens from a high power Cree LED.

The Ledlenser i7R is a tough, rechargeable version of the i7, offering a maximum output of 220 lumens from a high power Cree LED and this version comes with a double charger, an additional tail cap with the battery holder attached and an additional set of batteries.

The Ledlenser i9 CRI is specially designed to meet the needs of mechanics, craftsmen and engineers, offering a maximum output of 300 lumens from a high power Cree LED. The white LED has a high colour rendering index (CRI ≥ 90) and a colour temperature of 3700-4400 K that provides a natural light colour.

The Ledlenser i9 is specially designed to meet the needs of mechanics, craftsmen and engineers, offering a maximum output of 400 lumens from a high power Cree LED.

The Ledlenser i9R is a variation of the Standard i9R, still offering a maximum output of 400 lumens, but with an extended run-time of 6 hours due to the 26650 LiFePO4 battery.

The Ledlenser i9R is a rechargeable version of the i9, offering a maximum output of 400 lumens from a high power Cree LED.

The Ledlenser iH7R CRI is a super compact and lightweight rechargeable LED head torch, that offers a maximum output of 220 lumens from a single white LED on boost. The white LED has a high colour rendering index (CRI ≥ 90) and a colour temperature of 3700-4400 K that provides a natural light colour.

The Ledlenser iH9R offers a maximum output of 600 lumens white light from a single high powered LED on the boost setting and has a yellow body design that is the signature style of the industrial series range.

The LED Lenser iL7R intrinsically safe torch is ATEX Zone 2/22 compliant and uses a high quality LED to deliver 360 lumens of white light. The industrial strength polycarbonate body features a removable pocket clip so that it can be easily carried on a shirt pocket or on a trouser pocket.

The LED Lenser iLH8R is an intrinsically safe rechargeable head torch for use in ATEX zone 2/22 locations. The single white LED produces a maximum output of 300 lumens and has a beam range of up to 160 metres.

The Ledlenser M7R is a rechargeable multi-function LED torch that has up to ten output options and an intelligent, environmentally friendly recharge capability.

The Ledlenser MH10 offers a maximum output of 600 lumens white light from a single Xtreme LED and also has a red light on the back of the head torch for increased viability.

The Ledlenser MH7 offers a maximum output of 600 lumens white light from a single high powered LED on the boost setting and comes in a choice of four different body colours.

The Ledlenser MH7 offers a maximum output of 600 lumens white light from a single Xtreme LED on the boost setting and comes in four different bezel and button choices for a fun pop of colour, or in black & white.

The Ledlenser MH8 offers a maximum output of 600 lumens white light from a single high powered LED on the boost setting and comes in a choice of four different body colours.