Ledlenser P6R-QC CORE Rechargeable LED Torch
Ledlenser P6R-QC CORE Rechargeable LED TorchLedlenser P6R-QC CORE Rechargeable LED TorchLedlenser P6R-QC CORE Rechargeable LED TorchLedlenser P6R-QC CORE Rechargeable LED Torch

Ledlenser P6R-QC CORE Rechargeable LED Torch

Brand:  Ledlenser
Product Code:  502517

Availability:  

3 in stock
 
maximum allowance of 20 characters
£69.95

The P6R-QC CORE is a rechargeable quad colour hand torch that provides a maximum output of 270 lumens of white light, as well as offering red, green and blue outputs.

Red light preserves the eye's natural night vision and is good for low level night reading, animal watching or astrology, while green light is also great for animal watching as it is almost invisible to animals but is also used for map reading. Blue light is useful for some types of forensic analysis and allows some liquids to appear with higher contrast.

The switch sits on the tail of the torch and the low profile rubberised button has comfortable and easy operation. A single press will turn the light on in high, and will cycle through high, mid, low, 1 lumen and off in the current selected colour mode when the button is pressed within 3 seconds of the last press. If left in any mode for longer than 3 seconds then the next press will turn the light off.

If the tail button is pressed 5 times in quick succession it will enter the strobe mode in the current selected colour output and you can then either hold the button for 0.5 seconds to enter the multicoloured strobe or a single press will turn the light off. The colour outputs can easily be changed between with the torch turned on or off by twisting the head to line up the white arrow with either the white, red, green or blue line.

The tail end unscrews to reveal the micro USB port that sits at the end of the battery carrier, which can be separately unscrewed to be able to fit the included Ledlenser 2500 mAh 18650 lithium-ion battery inside the carrier before being tightly screwed back in and the tail cap screwed back on.

Once installed the battery can be charged inside the torch via the micro USB port on the end of the carrier by plugging in the included cable, and the standard USB at the other end plugs into a suitable USB port or adaptor. The LED indicator next to the port will glow red while charging is in progress and turn green to show charging is complete after approximately 3 hours, 20 minutes for a full charge.

An advanced focus system allows you to smoothly transition the light from spot to flood by sliding the head of the torch backwards and forwards, while the included lanyard can be threaded through the tail end and is useful for carrying the torch.

Product Features

White, red, green and blue beams
Four brightness levels plus strobe across all colours
Features USB charging & charging indicator

Operational Modes

White Light:
Low: 15 lumens; 110 hours run-time; 80 m beam range
Mid: 120 lumens; 14 hours run-time; 220 m beam range
High: 270 lumens; 5 hours run-time; 335 m beam range

Red Light:
Low: 15 lumens; 70 hours run-time; 70 m beam range
Mid: 60 lumens; 24 hours run-time; 150 m beam range
High: 145 lumens; 6 hours run-time; 220 m beam range

Green Light:
Low: 15 lumens; 120 hours run-time; 80 m beam range
Mid: 75 lumens; 20 hours run-time; 190 m beam range
High: 220 lumens; 6 hours run-time; 300 m beam range

Blue Light:
Low: 5 lumens; 120 hours run-time; 15 m beam range
Mid: 10 lumens; 20 hours run-time; 30 m beam range
High: 35 lumens; 7 hours run-time; 50 m beam range

Tested using the included 2500 mAh 18650 lithium-ion rechargeable battery. These results may vary between torch, battery, environment and individual usage habits.


Technical Details

Type: Hand-held rechargeable torch
Operating Modes: High / Mid / Low / 1 Lumen / Strobe / Multicoloured Strobe
Luminous Flux: Up to 270 lumens (white light)
Lamp: 1 x Power cool white LED / 1 x red LED / 1 x green LED / 1 x blue LED
Colour Temperature: 6500 K (white light)
Colour Rendering Index: 80 (white light)
Batteries Required: 1 x 18650 lithium-ion battery (included)
Charging Time: 3 hours, 20 minutes
Overall Length: 157 mm
Body Diameter: 27 mm
Head Diameter: 42 mm
Weight: 207 grams (including battery)
Body Colour: Black
Body Material: Aircraft grade aluminium
Switch Type: Tail push button and head rotating selector
Impact Resistance: 1.5 m
Environmental: Dust and water resistant to IP54 standard
Warranty: 2 years standard (7 years with product registration)
Regulatory Compliance: CE / RoHS


Packaging and Contents

Supplied in retail packaging and includes:
Ledlenser P6R-QC CORE LED hand torch x 1
Ledlenser 2500 mAh 18650 lithium-ion battery x 1
Micro USB charging cable x 1
Wrist lanyard x 1
Manual x 1

Compact USB Charger (2100 mA Output)

Compact USB Charger (2100 mA Output)

18 in stock

This compact USB charger has a power output of 2100 mA, making it ideal for charging many devices that charge via a USB port.

[More details]
£5.95Add to Basket

Compact USB Car Charger Adaptor (2000 mA Output)

Compact USB Car Charger Adaptor (2000 mA Output)

7 in stock

This USB car charger adaptor is so small and compact, so it won't be in the way when plugged in. Its output of 5 volts at 2000 mA makes it ideal for charging many devices that charge via a USB port.

[More details]
£4.95Add to Basket

Ledlenser Pouch Type G

Ledlenser Pouch Type G

Fits the Ledlenser P6R Core, P7R Core, P6R Signature, P7R Signature, P^R-QC Core, M7R, M7RX, P7R and M8

1 in stock

This Ledlenser black nylon torch holster is the perfect way to keep your torch protected and is designed for the Ledlenser P6R Core, P7R Core, P6R Signature, P7R Signature, P6R-QC Core, M7R, M7RX, P7R and M8.

[More details]
£7.95RRP: £8.80Add to Basket

Ledlenser Type D Torch Mounting Adapter

Ledlenser Type D Torch Mounting Adapter

Allows you to use your P7R CORE, P7R WORK, P7R SIGNATURE & P6R-QC CORE with the Ledlenser Connecting System

6 in stock

The Ledlenser torch mounting adapter enables the Ledlenser P series hand torches to be used with a range of accessories, and this Type D adapter is designed to fit the P7R Core, P7R Work, P7R Signature and P6R-QC Core.

[More details]
£4.95Add to Basket

Ledlenser Belt Clip Type A

Ledlenser Belt Clip Type A

Allows you to mount a range of Ledlenser torches on your belt with the Ledlenser Connecting System

3 in stock

The Ledlenser belt clip is perfect for hands free use and carrying of a range of different Ledlenser hand torches, head torches and battery packs thanks to the innovative Connecting System design.

[More details]
£6.95Add to Basket

Ledlenser Flexible Mount Type A

Ledlenser Flexible Mount Type A

Allows you to mount a range of Ledlenser hand torches onto surfaces with the Ledlenser connecting system

3 in stock

The Ledlenser flexible mount is perfect for hands free use and attaching of a range of different Ledlenser hand torches to flat surfaces, thanks to the innovative Connecting System design.

[More details]
£14.95Add to Basket

Ledlenser Universal Mounting Bracket Type E

Ledlenser Universal Mounting Bracket Type E

Allows you to mount a range of Ledlenser torches on your bike handlebars, or other cylindrical pole with the Ledlenser Connecting System

3 in stock

The Ledlenser universal mounting bracket is perfect for hands free use and attaching of a range of different Ledlenser hand torches and head torches to bike handlebars and other cylindrical poles, thanks to the innovative Connecting System design.

[More details]
£12.95Add to Basket

Ledlenser Bike Mount (25 to  29.5 mm Body)

Ledlenser Bike Mount (25 to 29.5 mm Body)

19 in stock

This Ledlenser universal bike mount enables the fitting of a torch to your bike handlebars and can hold torches with a body diameter of 25-29.5 mm.

[More details]
£10.95Add to Basket

Ledlenser Tripod Adapter Type D

Ledlenser Tripod Adapter Type D

Allows you to mount one or two Ledlenser torches onto a tripod with the Ledlenser Connecting System

3 in stock

The Ledlenser tripod adapter is perfect for hands free use and attaching of a range of different Ledlenser hand torches and head torches to tripods with a 0.25 inch thread, thanks to the innovative Connecting System design.

[More details]
£9.95Add to Basket

Ledlenser GoPro Adapter Type D

Ledlenser GoPro Adapter Type D

Allows you to mount a range of Ledlenser torches onto most GoPro systems with the Ledlenser Connecting System

3 in stock

The Ledlenser GoPro adapter is perfect for hands free use and attaching of a range of different Ledlenser hand torches and head torches to most GoPro systems and accessories, thanks to the innovative Connecting System design.

[More details]
£7.95Add to Basket

Ledlenser Gun Mount

Ledlenser Gun Mount

15 in stock

The Ledlenser gun mount is designed for use with torches and gun barrels that have a diameter of 25 - 34 mm.

[More details]
£7.95RRP: £8.80Add to Basket

Ledlenser Euroslot Helmet Mount Type A

Ledlenser Euroslot Helmet Mount Type A

Allows you to mount a range of Ledlenser hand torches on your hard hat via the 30 mm Euroslot

3 in stock

The Ledlenser Euroslot helmet mount is perfect for hands free use and attaching of a range of different Ledlenser hand torches to a hard hat that has a 30 mm Euroslot, thanks to the innovative Connecting System design.

[More details]
£6.95Add to Basket

Be the first to Write a Review for this item!

Receive a great FREE GIFT from Torch Direct

To qualify simply spend over £75 with us, on any one order, minus any delivery fees.
You will then receive an Silverpoint Firefly LED Torch completely FREE!

Free gift offer from Torch Direct Ltd

Make it personal with our laser engraving service!

We charge £3.95 per engraving and all you have to do to obtain this service is complete the text form above with the text that you wish to be laser engraved. The text box is located just above the add to basket button, do this before adding your chosen product to your shopping basket.

You can chose to engrave a name, slogan or any text you want.

We are able to reproduce lowercase, uppercase, numbers and punctuation marks, and you may use a maximum of 20 characters per item. Please take great care when typing your chosen text as our system will capture, process, and replicate exactly what has been typed by you. Mistakes cannot be corrected after the engraving has been completed and refunds or exchanges will not be offered.

How do we engrave your product?

We use a top quality fibre laser engraving machine, which provides an accurate beam of laser light to mark your product perfectly and permanently.

Which typeface do we use for engraving and what size is it?

We use a typeface called 'Arial' for all our engraving as we find it gives the best results overall. Depending on which product is being engraved, our machine operators will adjust the text size to fit any available space.

Some samples from our engraving gallery (click to zoom)

If you would like to see more examples then please visit our Engraving Service page.