LED Lenser P7.2 inc. Gun Mount & Pressure Switch

Product Code:  9407-GK
Brand:  LED Lenser
Product Type:  Hand Torch
Lumens Output:  320
Beam Colour:  White
Body Colour:  Black
Primary Cell Type:  AAA Alkaline
Run Time (hours):  4
Beam Range (metres):  260
Length (mm):  141
Focus Control:  Spot to Flood Focus
Waterproof:  IPX4 (Splash Resistant)
Weight (grams):  175

Our customers love us
Good experience
Saturday, 25 March 2017  |  Christopher

Helpful pre-purchase advice, prompt dispatch. The torch is everything I expected and hoped for.

Great service
Saturday, 25 March 2017  |  Roy

I live in Denmark, I ordered the torch on 17th March and it arrived on the 23rd of march thank you everyone at Torch Direct for a speedy service. As for the torch itself, I look forward to having it with me on the pennines this year and also when I'm out kayaking at night.

Saturday, 25 February 2017  |  Martin

Fast smooth service from Torch Direct again. Recommended!

LED Lenser P7.2 inc. Gun Mount & Pressure Switch

  (Avg rating from 11 reviews)

We are delighted to announce that the new LED Lenser« P7.2 hand-held torch has arrived. This stunning lighting instrument is an evolution of one of our best-selling models, the P7, which has been intricately re-evaluated to deliver a significantly increased level of performance that sets it apart from the crowd.


4 in stock
Laser Engraving:  

RRP: £90.95|Save: £32.00

We are delighted to announce that the new LED Lenser® P7.2 hand-held torch has arrived.

This stunning lighting instrument is an evolution of one of our best-selling models, the P7, which has been intricately re-evaluated to deliver a significantly increased level of performance that sets it apart from the crowd.

A new CREE® LED, reconfigured increased lighting range and a host of cutting edge-design improvements all combine effortlessly to deliver the next generation of lighting.

The supplied gun mount bracket allows you to mount the torch on virtually all sporting and hunting rifles and by replacing the standard rear on/off switch with the pressure switch you are able to switch the beam on while pressure is applied.

The supplied pressure switch can be used in three different ways as follows:

1. Held between the lips/teeth using the mouth to apply the pressure.
2. Attached to the trigger, as pressure is increased on the trigger the torch light comes on.
3. Attached to the body of the rifle close to the supporting hand's fingers.

This kit includes the P7.2 torch, gun mount bracket, pressure switch, nylon holster, lanyard, batteries and is perfect for home, work and of course weapon mounting.

Operational Modes
Low: 40 lumens; 50 hours run-time; 100 m beam range
Power: 250 lumens; 4 hours run-time; 220 m beam range
Boost: 320 lumens; 2 hours run-time; 260 m beam range

Note: The boost mode is obtained by pushing and holding-in the tail cap switch or by operating the pressure switch if fitted.

Technical Details

Type: Professional hand-held torch
Operating Modes: 320 lumens / 250 lumens / 40 lumens
LED: Cree LED chip
Beam Range: Up to 260 m
Run Time: Up to 50 hours on low setting
Maximum Luminous Flux: 320 lumens
Focus: One handed speed focus
Optics: Advanced focus system; spot to flood
Batteries Required: 4 x AAA alkaline (included)
Overall Length: 141 mm
Head Diameter: 37 mm
Barrel Diameter: 29.5 mm
Weight: 175 grams
Colours Available: Matt black
Body Material: Aircraft grade aluminium
Electrical Contacts: Gold plated contacts
Switch Type: End cap switch
Warranty: 5 years
Regulatory Compliance: CE / RoHS

Packaging and Contents

Supplied in retail packaging and includes:
P7.2 torch, nylon holster, lanyard and batteries in a gift box
Gun barrel mounting bracket x 1 (in retail box)
Pressure switch x 1 (in retail box)

Make it personal with our laser engraving service!

Please note: You will be asked for your engraving text during the checkout process.

We charge £1.95 per engraving and all you have to do to obtain this service is tick the checkbox which is above the add to basket button (above) before adding your chosen product to your shopping basket.

During the checkout process, after you have entered your name and address details and clicked continue, you will be able to complete the form with the text you wish to be engraved. This could be a name, slogan or any text you want.

We are able to reproduce lowercase, uppercase, numbers and punctuation marks, and you may use a maximum of 20 characters per item. Please take great care when typing your chosen text as our system will capture, process, and replicate exactly what has been typed by you. Mistakes cannot be corrected after the engraving has been completed and refunds or exchanges will not be offered.

How do we engrave your product?

We use a top quality fibre laser engraving machine, which provides an accurate beam of laser light to mark your product perfectly and permanently.

Which typeface do we use for engraving and what size is it?

We use a typeface called 'Arial' for all our engraving as we find it gives the best results overall. Depending on which product is being engraved, our machine operators will adjust the text size to fit any available space.

Some samples from our engraving gallery (click to zoom)

If you would like to see more examples then please visit our Engraving Service page.

Average Rating (Avg rating from 11 reviews):  

The little beast
Monday, 19 December 2016  | 

This torch is really something: light in weight, a very good led, solid construction...
In the list of small torches from Led Lenser is my favorite.

Solid bit of kit
Tuesday, 17 November 2015  | 

Nice and solid bit of kit. Very well designed and nice sturdy / quality feel.

Button is very quiet and handy to have that extra bit of reach and brightness when you hold it in for the 320 lumen option. So you effectively get 3 power settings.

The pressure switch isn't really a switch, it must be continually pressed to activate the light, so when you let go it turns off.

Gun mount is quite chunky and quite heavy but in the long run this will be good for durability. Prefer it this way to worrying about it breaking.

Overall the kit is expensive but you get what you pay for here. Buy once instead of buying multiple cheaper items that are liable to breaking.

It fits easily to my 6x24x50 scope
Saturday, 25 July 2015  | 

Bought this to attach to my air rifle for rat hunting. It fits easily to my 6x24x50 scope and can be removed when not required. Gives an excellent beam, though I cannot confirm 260 metres. The full 320 lumens cannot be permanently on and you have to hold the button in. Order the coloured filters at the same time if you intend hunting. Recommended.

P7.2 -The Ultimte Hunting Package...
Monday, 16 March 2015  | 

I've been using a Logan Lamp for years. With it's heavy battery, short illumination times and long charge time it has become a bit of a dinosaur.

The LED Lenser P7.2 leapt out at me as a no-brainer upgrade. 320 lumens max illumination and long burn times from four AAA batteries make it really easy to like. Most Cree torches take those odd, expensive batteries that you never use for anything else. With the P7.2 I can use rechargeable batteries that I already own and go out hunting with spares in my pocket. No more curtailed outings due to battery failure and a dark walk home.

Partnered with an MX1101 to scope mount the torch, (Torch Direct swapped out the original LED Lenser to barrel mount the torch) and a red filter this is an awesome, portable lamping package.

The set also includes the remote switch adapter to turn the lamp on with either your teeth or stock mount where you hold the gun.

I have mixed feelings about this. I would have liked it to turn the lamp on with one press then off with the next. Having to hold it on is a bit of a pain. Given that you can't turn the lamp on to full power with the original barrel and switch without holding the button on the end of the torch, you really have to use this for hunting.

A really long throw of over 200m at max power is not only useful when you are shooting, but for seeking out bunny eyes in the next field to pick your next stalking route. Even at the 200 lumen setting there is plenty of light for spotting and shooting.

Overall, a really awesome package and a torch you can use away from a shooting environment. Solidly built, well thought out and super powerful.

Quick processing of the order and delivery within 48 hours free mean that I will be recommending Torch Direct and won't hesitate to buy from them again. Great stuff!

LED Lenser 7.2 Gun Mount & Pressure Switch
Sunday, 8 March 2015  | 

Well constructed torch ideal to mount onto air rifle or rimfire complete with mount and easy to use pressure switch. Also purchased a set of filters at the same time to cover future needs. Excellent service from Torch Direct, speedy delivery happy to recommend.

Great torch, not quite bright enough to stop rabbits
Wednesday, 5 November 2014  | 

This is a great torch, and Torch Direct offer a great service, with quick delivery. If as per the other reviews you would like the scope mount then simply put it in the comments section of the order and they will swap it out (you don't then get the presentation box, just the torch in it's original box, but hey, who uses that anyway)j.

When it comes to lamping I have slightly mixed feelings. Yes this torch will light up targets to 75-100m, well enough to shoot. However at much over 25m it isn't bright enough to stop a rabbit. If your rabbits aren't yet skittish this is probably OK, but otherwise it means you either need to sneak up on them or be able to shoot a moving target!

Overall great for the price, but clearly not a substitute for a serious lamping outfit.

LED Lenser P7.2 inc. Gun Mount & Pressure Switch
Tuesday, 14 October 2014  | 

This is by no doubt, the best torch for the price range, switch is excellent, but not keen on rifle clamp, it is effective but a bit chunky for my liking, Also, with the extra battery pack, and if batteries get low, it can be changed over quickly to the push button switch, giving a longer service time. Thank you. Torch Direct service also excellent and fast delivery. Think H7.5 head torch will be my next purchase form Torch Direct

LED Lenser P7.2 inc. Gun Mount & Pressure Switch
Tuesday, 9 September 2014  | 

Found this kit very good, easy to attach to the scope with the MX 1101 mount that I asked for instead of the supplied mount. I use this on my 22LR and also a 223 and have had no problems at all also quick delivery time to Ireland

LED Lenser P7.2 with Gun Mount
Tuesday, 15 April 2014  | 

Wow, wow wow. Best customer service for many a long year. I spoke to Stewart King, as the supplied gun mount is designed to fit to the weapon's barrel. I asked Stewart about an alternative, as I wanted a scope mount. Stewart offered to supply the MX 1101 mount in place of the supplied mount at no extra cost. This fits my MTC Viper 4x16x50 scope perfectly! Absolutely superb products and outstanding service! I ordered yesterday - arrived today. I cannot praise Torch Direct highly enough. Thanks again Stewart.

P7.2 inc. Gun Mount & Pressure Switch
Wednesday, 8 January 2014  | 

Torch as good as other Lensers I have and the mount high and strong. Could the lead be longer? Great service from Torch Direct.

Read all 11 customer reviews...

Great FREE GIFT offer from Torch Direct

Spend over ú50 with us, on any one order, minus any delivery fees, and you'll receive TWO fantastic Xtar LED Key Ring Torches completely FREE!

Free gift offer from Torch Direct Ltd
Related Products & Accessories
Duracell Plus Power AAA Alkaline Batteries - 4 Pack

Duracell Plus Power AAA Alkaline Batteries - 4 Pack

10+ in stock

Duracell Plus Power gives you reliable performance and long-lasting power in a broad range of everyday devices. You can rely on Duracell Plus Power to power our range of AAA cell torches.

[More details]
£2.95Add to Basket

LED Lenser Bike Mount (25 to  29.5 mm Body)

LED Lenser Bike Mount (25 to 29.5 mm Body)

10+ in stock

Bike mount designed for torches with a 25-29.5 mm body diameter only. Designed to fit the following LED Lenser torches: Police Tech Focus, Police Tech Focus FS, P7, P7.2, B7, T7, T7.2, M7, M8, MT7, T7M, M7R, M7RX, X7R, L5, L6, L7, L7E, E7, F1, V2 and V6.

[More details]
£8.95RRP: £10.95Add to Basket

Universal Torch Holster

Universal Torch Holster

10+ in stock

Universal Holster for LED Lenser Torches. Perfect for the T7, P7 and P14 LED Lenser products. Expands to fit most AA, AAA and D cell torches.

[More details]
£8.95Add to Basket

LED Lenser Intelligent Pouch

LED Lenser Intelligent Pouch

10+ in stock

The LED Lenser Intelligent pouch, complete with 4 exchangeable coloured filters. The Intelligent Pouch has a swivelling belt clip and pouch top opening so you can use the torch while it's sheathed. Suitable for use with the P7, T7, B7, M7, MT7, M7R, L7E and L7 LED Lenser torches. The lens holder can also be removed to use directly with the P7 and is a perfect push fit.

[More details]
£12.95RRP: £16.50Add to Basket

LED Lenser Filter Set

LED Lenser Filter Set

10+ in stock

LED Lenser have now introduced a filter set, which includes red, green, yellow and blue interchangeable coloured filters. Suitable for use with the P7, T7, B7, M7, M8, MT7, M7R, L7E, L7, L7E, H14 and H14R LED Lenser models. Also suitable for any torch with a head diameter of 37mm

[More details]
£7.95RRP: £8.80Add to Basket

LED Lenser Intelligent Belt Clip

LED Lenser Intelligent Belt Clip

10+ in stock

LED Lenser Intelligent Belt Clip, perfect for hands free torch usage. Four different sizes available, please see full product description to see which options are available.

[More details]
£7.95RRP: £8.80Add to Basket

Nylon Torch Holster

Nylon Torch Holster

Ideal for any torch with a length of 110mm - 150mm

10+ in stock

Black nylon torch holster or pouch which is suitable for many torches including the following; LED Lenser P7, T7, B7, M7, V2, L5, L7, MT7 and any torch with a length of between 110mm to 150mm.

[More details]
£6.95Add to Basket