The LED Lenser i9R is a rechargeable version of the i9, offering a maximum output of 400 lumens from a high power Cree LED.
Made from robust aluminium, it features the industrial series' signature yellow ring on the inside of the head and yellow detailing on the switch, which is great for visibility in a work place environment. Also included is a yellow rubber anti-roll ring which can be put on the end of the torch to prevent it rolling off flat surfaces and the body of the torch has a diamond knurling design to ensure a secure grip, even with oily or sweaty hands.
Featuring the Advanced Focus System (AFS), the patented combination of a reflector and lens allows the i9R to create a light system that provides both a focused beam for long-distance and a homogenous spill-beam for up-close activities. You can quickly focus between spot and flood by sliding the head of the torch backwards and forwards.
The beam can reach up to 260 metres range when fully focused into a spot and the fast lock feature allows you to lock the head into place at your desired focus point, so it can stay where you need it.
Simple to operate, it has a push button switch on the side that cycles between the two brightness settings of high and low, with half presses of the switch. Alternatively, one press turns the light on in high and the next press turns it off. A third press turns the torch on in low and the next press turns it off.
It uses two C cell NiMH batteries, with superior gold-plated battery contacts to help resist corrosion and keep the battery running well. A full charge can provide a run-time of up to 20 hours on the low setting and the energy saving function gradually decreases the output down to 1 lumen, in order to prolong the output of the torch.
The batteries are charged inside the torch using the LED Lenser charging cradle. The head of the torch slots into the cradle and the two contacts on the neck of the torch connect with the two strips in the cradle. The included cable plugs into the port on the charging cradle at one end, and the other end plugs into a USB port on the computer/laptop or a suitable mains/car USB adaptor.
Two lights either side of the charging cradle displays charging status. The light is blue when in standby mode, turning red once the torch is inserted to show charging is in progress and when charging is complete the light will go green. If there is an error, the light will flash blue to indicate this. The cradle can be fixed to the wall with a wall mount (sold separately) as a permanent point of charging.
The included lanyard makes easy carrying and the nylon holster stows the i9R safely when the torch is not in use.
High: 400 lumens; 3 hours run-time; 260 m beam range
Low: 40 lumens; 20 hours run-time; 80 m beam range
Type: Professional hand-held torch
Luminous Flux: Up to 400 lumens
Beam Range: Up to 260 m
Run Time: Up to 20 hours (down to 1 lumen on low setting)
LED: High power Cree LED
Focus: Spot to flood
Batteries Required: 2 x C cell NiMH (included, sealed together to form a single battery pack)
Overall Length: 187 mm
Body Diameter: 39 mm
Weight: 320 grams
Body Colour: Black
Body Material: Robust aluminium housing
Electrical Contacts: Gold plated contacts
Switch Type: Side push button switch
Environmental: Water resistant to IPX4 standards
Warranty: 5 years
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in retail packaging and includes:
LED Lenser i9R LED torch x 1
Lanyard x 1
Nylon holster x 1
Anit roll ring x 1
C cell NiMH battery pack x 1
Charging cradle x 1
USB cable x 1
Manual x 1