The LED Lenser i7R is a tough, rechargeable version of the i7, offering a maximum output of 220 lumens from a high power Cree LED and this version comes with a double charger, an additional tail cap with the battery holder attached and an additional set of batteries.
Made from robust aluminium, it features the industrial series' signature yellow ring on the inside of the head and yellow detailing on the switch, which is great for visibility in a work place environment. Also included is a yellow rubber anti-roll ring which can be put on the end of the torch to prevent it rolling off flat surfaces and the body of the torch has a diamond knurling design to ensure a secure grip, even with oily or sweaty hands.
Featuring the Advanced Focus System (AFS), the patented combination of a reflector and lens allows the i7R to create a light system that provides both a focused beam for long-distance and a homogenous spill-beam for up-close activities. You can quickly focus between spot and flood by sliding the head of the torch backwards and forwards.
The beam can reach up to 180 metres range when fully focused into a spot and the fast lock feature allows you to lock the head into place at your desired focus point, so it can stay where you need it.
Simple to operate, it has a push button switch on the tail that cycles between the two brightness settings of high and low, with half presses of the switch. Alternatively, one press turns the light on in high and the next press turns it off. A third press turns the torch on in low and the next press turns it off.
It uses four AAA NiMH batteries, with superior gold-plated battery contacts to help resist corrosion and keep the battery running well. A full charge can provide a run-time of up to 30 hours on the low setting and the energy saving function gradually decreases the output down to 1 lumen, in order to prolong the output of the torch.
The batteries are charged inside the torch battery compartment using the LED Lenser double charging station. This kit is supplied with two sets of four AAA NiMH and it comes with an additional battery compartment so that you can charge up two sets of batteries at the same time. The spare compartment is perfect for when you are away from home as you can easily swap the whole battery compartment rather than fiddling around taking all the batteries out and replacing them.
The tail of the torch unscrews, with the battery compartment attached, and the two compartments slot into either side of the double charging station. A small cyclinder protrudes from the front of the charger so you can store the head and barrel of the torch while charging is in progress. The included cable plugs into the micro USB port on the charging base at one end, and the other end plugs into a USB port on the computer/laptop or a suitable mains/car USB adaptor.
A light around the bottom of the charging station displays charging status. The light is blue when in standby mode, turning red once the battery pack is inserted to show charging is in progress and when charging is complete the light will go green. If there is an error, the light will flash blue to indicate this. A sticky pad is included so that you can secure your charging station in one location if you wish and there are also holes on the back so that it can be wall mounted (fixtures not included).
The included lanyard makes easy carrying and the nylon holster stows the i7R safely when the torch is not in use.
High: 220 lumens; 4 hours run-time; 180 m beam range
Low: 25 lumens; 30 hours run-time; 60 m beam range
Type: Professional hand-held torch
Luminous Flux: Up to 220 lumens
Beam Range: Up to 180 m
Run Time: Up to 30 hours (down to 1 lumen on low setting)
LED: High power Cree LED
Focus: Spot to flood
Batteries Required: 4 x AAA NiMH (included)
Overall Length: 130 mm
Head Diameter: 36.5
Body Diameter: 29.5 mm
Weight: 175 grams
Body Colour: Black
Body Material: Robust aluminium housing
Electrical Contacts: Gold plated contacts
Switch Type: End cap switch
Environmental: Water resistant to IPX4 standards
Warranty: 5 years
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in retail packaging and includes:
LED Lenser i7R LED torch x 1
Double charging station x 1
Additional battery compartment with tail cap x 1
Micro USB cable x 1
Adhesive pad x 1
Lanyard x 1
Nylon holster x 1
Anit roll ring x 1
900 mAh AAA NiMH battery x 8
Manual x 1