The Ledlenser i6R is a slimline, rechargeable penlight offering a maximum output of 120 lumens and a beam range of up to 100 metres on the highest setting.
Made from robust aluminium, it also features the industrial series' signature yellow ring on the inside of the head and yellow detailing on the switch, which is great for visibility in a work place environment.
Featuring the Advanced Focus System (AFS), the patented combination of a reflector and lens allows the i6R to create a light system that provides both a focused beam for long-distance and a homogenous spill-beam for up-close activities. You can quickly focus between spot and flood by sliding the head of the torch backwards and forwards.
Simple to operate, it has a push button switch on the tail that cycles through the two brightness settings of high and low, with half presses of the switch. Alternatively, one press turns the light on in high and the next press turns it off. A third press turns the torch on in low and the next press turns it off.
It uses three rechargeable AAA NiMH batteries, with superior gold-plated battery contacts to help resist corrosion and keep the battery running well. A full charge can provide a run-time of up to 25 hours on the low setting and the energy saving function gradually decreases the output down to 1 lumen, in order to prolong the output of the torch.
The batteries are charged inside the torch using the Ledlenser charging station. The tail of the torch sits in the charger and the included cable plugs into the micro USB port on the charging base at one end, and the other end plugs into a USB port on the computer/laptop or a suitable mains/car USB adaptor.
A light around the bottom of the charging station displays charging status. The light is blue when in standby mode, turning red once the torch is inserted to show charging is in progress and when charging is complete the light will go green. If there is an error, the light will flash blue to indicate this. A sticky pad is included so that you can secure your charging station in one location if you wish and there are also holes on the back so that it can be wall mounted (fixtures not included).
The long barrel design is perfect for illuminating narrow or confined spaces in a factory, workshop or garage and the included pocket clip and holster provide easy stowing when the torch is not in use.
Operational Modes
High: 120 lumens; 4 hours run-time; 100 m beam range
Low: 10 lumens; 25 hours run-time; 30 m beam range
Technical Details
Type: Professional hand-held torch
Luminous Flux: Up to 120 lumens
Beam Range: Up to 100 m
Run Time: Up to 25 hours (down to 1 lumen on low setting)
LED: High power Cree LED
Focus: Spot to flood
Batteries Required: 3 x AAA NiMH (included)
Overall Length: 170 mm
Body Diameter: 19 mm
Weight: 82 grams
Body Colour: Black
Body Material: Robust aluminium housing
Electrical Contacts: Gold plated contacts
Switch Type: End cap switch
Environmental: Water resistant to IPX4 standards
Warranty: 5 years
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in retail packaging and includes:
Ledlenser i6R LED torch x 1
Pocket clip x 1
Nylon holster x 1
900 mAh AAA NiMH battery x 3
Charging station x 1
Micro USB cable x 1
Adhesive pad x 1
Manual x 1