UniLite WCIL11 Wireless Charging Rechargeable LED Inspection Light

The WCIL11 is an inspection light that is part of Unilite's wireless charging range and provides a maximum of 1100 lumens of white light (6500 K) from the flood COB LED when in the highest setting.

The WCSGL or WCDBL wireless charging pads can be purchased separately and enable you to wireless charge the WCIL11 as well as a number of other Unilite products in the WC range without the need to plug cables directly into the torch. The torch can also be recharged via the USB-C port using the included cable, so no extra purchase is necessary to be able to recharge the device.

As well as the floodlight the WCIL11 also has an additional SMD LED that sits at the top of the torch, and provides a white light with an output of 220 lumens and colour temperature of 6500 K.

A single button on the back operates all light functions and each press will cycle through in the order of torch, flood low, flood mid, flood high and off. If in any setting longer than 5 seconds the next press will turn the light off rather than cycling through to the next output, and the last used setting will be remembered next time the light is turned on. Utilising a built-in 3350 mAh lithium-ion rechargeable battery, the WCIL11 has a run time of up to 1 hour, 30 minutes on the highest setting.

Recharging the unit is fast and easy thanks to the direct USB-C charging or wireless charging. To charge directly simply lift the dust cover to insert the included cable into the USB-C port back of the light (with the torch turned off) and the other end into a USB-A power source with an output of up to 2 A. To show charging is in progress three green flashing LEDs on the front will illuminate and turn solid green to show charging is complete after approximately 4 hours, 30 minutes when using a 2 A input.

If using the separately sold wireless charging pad, take the cable from the work light and instead plug it into the USB-C port on the wireless charging pad and connect it to a USB-A power source with an output of up to 2 A. Then place the connection point on the back onto the charging symbol of the charging pad (not included). To show charging is in progress three green flashing LEDs on the front will illuminate and turn solid green to show charging is complete after approximately 6 hours, 30 minutes when using a 2 A input.

The WCIL11 has multiple hands free uses and can either be attached to magnetic surfaces using the two strong magnets on the back, or the magnet on the base of the 180° rotating handle that can be pulled out at different angles for a range of light positions, and also features two 360° rotatable hanging hooks that are folded away in the back of the light.

Product Features

Both wireless and USB-C charging
Integral hanging hook and magnet for hands free use
Dual LED for torch and flood output
Easy push button switch
Fluorescent body design for high visibility
Ultra strength aluminium and polycarbonate housing

Operational Modes

Torch: 220 lumens; 7 hours run-time; 33 m beam range
Flood Low: 280 lumens; 7 hours, 30 minutes run-time; 28 m beam range
Flood Mid: 550 lumens; 3 hours, 30 minutes run-time; 34 m beam range
Flood High: 1100 lumens; 1 hour. 30 minutes run-time; 47 m beam range

Technical Details

Operating Modes: Torch / Flood High / Flood Mid / Flood Low
Luminous Flux: Up to 1100 lumens
LED: White COB LED / white SMD LED
Colour Temperature: 6500 K
Beam Range: Up to 47 m
Batteries Required: 1 x built-in 3.7 V 3350 mAh lithium-ion rechargeable battery
Charge Time: 4.5-6.5 hours
Body Material: High quality polycarbonate and aluminium
Measurements: 260 x 53 x 39.3 mm
Weight: 396 grams
Switch Type: Push button
Impact Resistance: 2 m drop resistant, IK07 shock resistant
Environmental: Water and dust resistant to IP65 standard
Warranty: 1 year

Packaging and Contents

Supplied in retail packaging and includes:
Unilite WCIL11 rechargeable LED inspection light x 1
USB-C to USB-A charging cable x 1
Manual x 1