UniLite WCFL12 Wireless Charging Rechargeable LED Torch
UniLite WCFL12 Wireless Charging Rechargeable LED Torch is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
The WCFL121 is a hand torch that is part of Unilite's wireless charging range and provides a maximum output of 1200 lumens from the white LED (6500 K) when in the highest setting.
The WCSGL or WCDBL wireless charging pads can be purchased separately and enable you to wireless charge the WCFL12 as well as a number of other Unilite products in the WC range without the need to plug cables directly into the torch. The torch can also be recharged via the USB-C port using the included cable, so no extra purchase is necessary to be able to recharge the device.
As well as the floodlight the WCIL11 also has an additional SMD LED that sits at the top of the torch, and provides a white light with an output of 220 lumens and colour temperature of 6500 K.
Four brightness levels and strobe are available, and are controlled by two buttons, with the side button turning the torch on/off in the last used mode and the tail button changing the mode. Once turned on with the side button, simply press the tail button to cycle through in the order of eco, low, mid and high starting from the last used mode. To access strobe press and hold the tail button for 2 seconds. Utilising a built-in 2600 mAh lithium-ion rechargeable battery, the WCFL12 has a run time of up to 2 hours on the highest setting.
Recharging the unit is fast and easy thanks to the direct USB-C charging or wireless charging. To charge directly simply lift the dust cover to insert the included cable into the USB-C port on the tail of the light (with the torch turned off) and the other end into a USB-A power source with an output of up to 2 A. To show charging is in progress three green flashing LEDs on the side will illuminate and turn solid green to show charging is complete after approximately 4 hours when using a 2 A input.
If using the separately sold wireless charging pad, take the cable from the work light and instead plug it into the USB-C port on the wireless charging pad and connect it to a USB-A power source with an output of up to 2 A. Then place the connection point on the back onto the charging symbol of the charging pad (not included). To show charging is in progress three green flashing LEDs on the front will illuminate and turn solid green to show charging is complete after approximately 6 hours when using a 2 A input.
Made from a super tough nylon, aluminium and TPR construction, the handle offers a rubberised finished for good grip and is also fluorescent yellow to provide extra visibility.
Both wireless and USB-C charging
Two push button switches
Fluorescent body design for high visibility
Ultra strength nylon, aluminium and TPR housing
High: 1200 lumens; 2 hours run-time; 251 m beam range
Mid: 450 lumens; 4 hours run-time; 172 m beam range
Low: 50 lumens; 25 hours run-time; 54 m beam range
Eco: 10 lumens; 200 hours run-time; 21 m beam range
Operating Modes: High / Mid / Low / Eco / Strobe
Luminous Flux: Up to 1200 lumens
LED: White LED
Colour Temperature: 6500 K
Beam Range: Up to 251 m
Batteries Required: 1 x built-in 3.7 V 2600 mAh lithium-ion rechargeable battery
Charge Time: 4-6 hours
Overall Length: 159 mm
Diameter: 41 mm
Weight: 215 g
Body Material: Nylon, aluminium and TPR
Switch Type: Push button x 2
Impact Resistance: 2 m drop resistant, IK07 shock resistant
Environmental: Waterproof and dust resistant to IP68 standard
Warranty: 1 year
Packaging and Contents
Supplied in retail packaging and includes:
Unilite WCFL12 rechargeable LED torch x 1
USB-C to USB-A charging cable x 1
Manual x 1