The Olight Baldr IR is a versatile LED weapon light with a high performance neutral white LED that produces 1350 lumens of white light, and also features an invisible Infrared laser that can be seen when using night vision goggles. As this is a high drain device, the temperature regulation will automatically drop the brightness to 500 lumens after 1 minute to protect the LED.
The Class 1 IR beam has a 850 nm wavelength with a 0.78 mW power output and can be adjusted with an included tool to calibrate the angle of the beam. A selector switch on the back of the IR beam can be positioned to white light only, Infrared only or off for safety.
Two ambidextrous switches can be pushed from the side and are located on the back of the light. You can easily turn the light on/off when WH or IR is selected with a single press of either button. Once the light is on in white light the brightness level can be changed between high and low by quickly double pressing either button. The last used brightness will be recalled when the light is next turned on.
For momentary illumination press and hold either button, and once released the light will go off. Strobe can be activated by pressing and holding both buttons at the same time, and direct access to high can be achieved by double pressing the button from off.
A swing arm mechanism located on the edge of the gun mount opens up, allowing you to easily attach and detach the torch to the gun rail. Once in position, close the swing arm and the Baldr IR will be securely fitted to the gun rail.
It is designed for handguns with a picantinny rail or a glock style rail and comes with two mount adaptors (1913 and GL) to make it compatible with a wide range of handguns. The GL adaptor is already fitted and can be changed using the included wrench.
The combination of the High Performance NW LED and TIR reflector provides a smooth beam with a standard hotspot to enable the beam to go further for a maximum beam range of 260 metres.
High: 1350 lumens; 1 minutes run-time, 500 lumens; 1 hour, 18 minutes run-time, 300 lumens; 20 minutes run-time*
Low: 300 lumens; 4 hours run-time
IR: 0.78 mW; 80 hours
Strobe: 1350 lumes (13 Hz)
Please note: *The high setting after 1 minutes run-time will decrease to 500 lumens to protect the LED from overheating.
Important Battery Information
Primary Cells - Please note that CR123A lithium metal primary battery cells are not rechargeable.
Please click on the Product Accessories tab above to view compatible batteries.
Type: Professional handgun light LED torch
Operating Modes: High / Low / Momentary on / IR / Strobe
Luminous Flux: Up to 1350 lumens (overheat protection drops it to 500 lumens)
Infrared Wavelength: 850 nm
Infrared Max Output: 0.78 mW
Lamp Type: High performance NW LED
Reflector System: Smooth
Beam Range: 260 m
Batteries Required: 2 x CR123A Lithium metal (included)
Dimensions: 84 x 36.5 x 44.5 mm
Weight: 129 grams (including batteries)
Body Colour: Black
Body Material: 6061-T6 aluminium alloy
Body Finish: Type III hard anodised
Switch Type: Left and right buttons located on the back
Impact Resistance: 1 m
Environmental: Waterproof to IPX4
Warranty: 5 years
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in retail packaging and contains:
Olight Baldr IR weapon light x 1
CR123A Primary Lithium Cell x 2
GL and 1913 rail mount x 1
H1.5 allen wrench x 1
Nylok screws x 2
Manual x 1