The Olight Warrior X Pro is the upgraded version of the Warrior X, that still retains the revolutionary design such as the vibration battery indicator, aggressive appearance, silicon tactical ring and the option to use a magnetic remote switch, but also brings some new features to the table.
Utilising a high performance neutral white LED, the output has increased to 2100 lumens on turbo (drops to 1000 lumens after 2 minutes use) and now uses an updated high discharge 21700 customised lithium-ion battery with a capacity of 5000 mAh to provide longer run-times.
It still connects to a remote pressure switch magnetically (pressure switch not included), rather than having to unscrew the tail cap and replace it, which makes it much more efficient. And if all that wasn't enough already, the warrior X Pro still features the innovative low battery level warning function in the form of a subtle vibration within the torch, rather than a light, making it much more stealthy.
The low power vibration feature will notify you at the following power levels:
Power ≤30% - vibrate once every 5 minutes
Power ≤10% - vibrate once per minute
Power ≤5% - vibrate once every 10 seconds
The customised lithium-ion battery is recharged inside the torch using the included MCC3 magnetic charging cable. This new design charging cable charges the battery faster than the regular Warrior X, despite it being a larger capacity battery, all thanks to the 2 A output capability of the MMC3 cable (the warrior X Pro is not compatible with any other MCC cable).
Simply connect the magnet to the base of the Warrior X Pro and plug the USB end into a computer or the mains using a suitable USB adaptor (5 V 2 A recommended for fastest charging). The indicator light on the magnet will go red while charging is in progress and turn green once charging is complete after approximately 5 hours, 30 minutes if the power supply is sufficient enough to support the 2 A output, otherwise the cable will output at a lower rate or 1 A or 1.5 A depending on the power supply.
The redesigned tactical tail switch provides stronger magnetism and allows for easier operation while wearing gloves and due to the raised button, but without compromising accidental activation thanks to the three raised struts that not only preventing it easily turning on but also allow for tail stand capability. The tail switch will access constant low with a quick half press, or momentary low with a half press and hold. Constant high is accessed with a quick deep press or momentary high is activated with a deep press and hold. Single press the button again to turn the torch off.
A tactical aluminium anti-roll ring comes fitted on the torch, along with a pocket clip that is useful for attaching the torch to a pocket or clothing when not in use, however if you aren't bothered about using the pocket clip, you can remove the aluminium anti-roll ring and pocket clip and put the included silicone tactical grip ring in it's place. Unscrew the tail cap, lift off the metal ring, pop off the pocket clip and then simply slide the silicone grip over the end with the wider side first, followed by the O-ring, and once fully pushed down screw the tail cap back on. The rubber ring provides a comfortable grip making operation of the tail switch easy.
A lanyard is included and can be attached to the aluminium tactical ring for secure carrying. Also included for easy carry is a sturdy nylon holster with a stitched belt loop, a D ring and also a strap that uses a pop stud which could be threaded through a molle vest strap if desired. What makes this holster extra special is the strong magnetic closure, which keeps the torch securely in the pouch, but is also easy to gain access to when required.
The aluminium alloy is two times as thick compared to other tactical torches, which is why the Warrior X Pro easily withstands the 3 m drop test, and as with most Olight torches, it also has an IPX8 waterproof rating.
Heavy duty build
Metal tail switch that won't wear down like a rubber switch
Larger heat sinking rings on the head for efficient heat dissipation
Silicone retainer ring for better grip on the light
Magnetic tail cap charging
Faster 2 A charging and larger capacity 21700 battery
2100 lumens; 2 minutes run-time; 500 m beam range*
1000 lumens; 1 hour, 40 minutes run-time
300 lumens; 23 minutes run-time
300 lumens; 8 hours run-time; 180 m beam range
Tested using the included battery. Results may vary between torch, environment and usage.
Please note: *The high setting after 2 minutes run-time will decrease to 1000 lumens to protect the LED from overheating, and will drop again after 1 hour, 40 minutes.
Type: Tactical hand torch
Operating Modes: Low / High
Luminous Flux: Up to 2100 lumens
Lamp Type: High power neutral white LED
Reflector System: Smooth reflector
Beam Range: Up to 500 m
Batteries Required: Olight customised 5000 mAh 21700 lithium-ion
Overall Length: 149 mm
Head Diameter: 39 mm
Barrel Diameter: 26.2 mm
Weight: 239 grams (including batteries)
Colour: Black body with blue bezel
Body Material: Thick aluminium alloy
Body Finish: Type III hard anodised
Lens: 3 mm tempered glass
Switch Type: Tail cap push button
Impact Resistance: 3 m
Environmental: Waterproof to IPX8 standard (2 m)
Warranty: 5 years (torch), 1 year (battery)
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in a retail packaging and includes:
Olight Warrior X Pro LED torch x 1
Olight customised 5000 mAh 21700 lithium-ion battery x 1
MCC3 USB magnetic charging cable x 1
Metal tactical ring (fitted) x 1
Stainless steel pocket clip (fitted) x 1
Holster x 1
Silicone tactical grip ring x 1
Manual x 1