The Olight SMINI Baton Ti is a limited edition LED torch for 2016 that is made from titanium alloy and comes in a choice of three finishes; Polished Titanium, Bead Blasted Titanium or Rainbow PVD coated.
It has a maximum output of 550 lumens, which is 10% more than the S1, and is powered by one CR123A primary lithium cell which is included, or can use one RCR123 rechargeable lithium-ion battery.
The SMINI Ti offers a neutral white output from a Cree XM-L2 LED, and has a maximum beam distance of 110 metres.
Simply press the side mounted button to turn the torch on and then hold the button down to cycle through low, mid, high in turn. The moonlight mode can be accessed directly when the torch is off by pressing and holding down the switch. Instant access to high mode can be achieved by a quick double press when the light it off.
When the torch is switched on a quick triple click of the on/off button activates strobe mode.
The SMINI has a memory function to allow you to activate the light in a particular mode, a strobe mode for personal protection and a lockout mode to prevent accidental activation.
Two timer settings are available; long timer (9 minutes) and short timer (3 minutes). Double clicking the side switch will enter this setting and one blink indicates the 3 minutes mode, and two blinks indicates the 9 minutes mode.
Double click the side switch to change the timer to the opposite setting. After the setting is saved, the light will blink 3 times and then will enter the timer mode. The light will automatically turn off when the timer is over.
High: 550 lumens; 1.5 minutes run-time, 300 lumens; 2 hours run-time*
Mid: 60 lumens; 8 hours, 30 minutes run-time
Low: 12 lumens; 64 hours run-time
Moonlight Mode: 0.5 lumens; 30 days run-time
Strobe: 10 Hz
The above parameters are tested to ANSI/NEMA FL1-2009 standards using one lithium metal CR123A 3 V, 1600 mAh non-rechargeable battery.
Please note: *The high setting after 1.5 minutes run-time will decrease to 300 lumens to protect the LED from overheating.
Important Battery and Battery Charger Information
Primary Cells - Please note that CR123A lithium metal primary battery cells are not rechargeable.
Rechargeable Cells - If you are intending to use lithium-ion rechargeable batteries then you will also need to purchase a suitable battery charger if you do not already have one.
Please click on the Product Accessories tab above to view compatible batteries and battery chargers.
Type: Professional hand-held LED torch
Operating Modes: Moonlight / Low / Mid / High / Strobe (10 Hz)
Luminous Flux: Up to 550 lumens
Lamp Type: Cree XM-L2 NW LED
Lens: Aluminium Smooth reflector
Beam Range: 110 m
Batteries Required: 1 x CR123A Lithium (included) / 1 x RCR123 Li-ion (not included)
Run Time: Up to 30 days at lowest setting
Overall Length: 54.5 mm
Diameter: 21 mm
Weight: 31.5 grams (excluding battery)
Body Material: Constructed from titanium alloy
Body Finish: Polished titanium, bead blasted titanium or rainbow PVD
Switch Type: Side mounted
Impact Resistance: 1.5 m
Environmental: Waterproof to IPX8 standard (2 m)
Warranty: 5 years
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in a presentation box and contains:
Olight SMINI Ti torch x 1
Pocket clip x 1
Olight CR123A lithium metal battery x 1
Prize draw card x 1
Manual x 1