The Olight Seeker 2 is a high output rechargeable LED torch that is the little brother the the Seeker 2 Pro, but still punches a staggering 3000 lumens output on the highest setting. To prevent overheating the Seeker 2 will maintain the turbo brightness for 3 minutes before dropping down to 600 lumens to protect the LED.
Featuring three Osram cool white LEDs, the Seeker 2 combines this with a TIR optic lens and smooth reflector to provide a balanced beam profile that has a central hotspot and flood area, offering a maximum range of 220 metres. The aluminium body of the torch features contoured surface groves to provide a comfortable and non slip grip.
The multi-function side-switch turns the torch on and off with each press and cycles through the brightness modes of low, mid and high when you hold down the button with the light on. For turbo access you double click the button and a triple click enters strobe. Moonlight mode can be accessed by holding the button down while the light is off.
When the light is turned on the battery level indicator built into the button will illuminate. A green light indicates above 60% power, an orange light indicates between 10%-60 % power, a red light indicates between 5%-10% powers and a red blinking light indicates less than 5% power and the torch should be charged. When turned on in moonlight the power indicator won't turn on unless the power is less than 10%.
The Seeker 2 features a lock-out function, so you don't have to worry about accidentally activating the light in your pocket or bag. A built in memory function automatically returns to your last brightness level from the off position (turbo will be memorised as high mode and the strobe cannot be memorised).
It is powered using the included Olight 21700 5000 mAh customised lithium-ion battery, which is recharged inside the torch using the included MCC1A magnetic charging cable. Simply connect the magnet to the base of the Seeker 2 and plug the USB end into a computer or the mains using a suitable USB adaptor. The indicator light on the magnet will go red while charging is in progress and turn green once charging is complete after approximately 6 hours.
The Seeker 2 can also be charged with the Olight L Dock charging station (not included) which can be wall mounted, making it ideal for quick access to the torch when required.
Two timer settings are on the Seeker 2; long timer (9 minutes) and short timer (3 minutes). Double click and hold the side switch while the light is on to enter this setting. One blink indicates the 3 minutes mode, and two blinks indicates the 9 minutes mode.
Product Features
Lock-out function to prevent accidental activation
Memory function remembers last mode used
Milled finger grooves for a comfortable feel in the hand
Battery status indicator built into the switch
Operational Modes
Turbo: 3000 lumens; 3 minutes run-time, 600 lumens; 2 hour, 35 minutes run-time; 220 m beam range*
High: 1200 lumens: 1 hour, 50 minutes run-time, 600 lumens; 50 minutes run-time; 135 m beam range**
Mid: 300 lumens; 13 hours run-time; 68 m beam range
Low: 50 lumens; 72 hours run-time; 28 m beam range
Moon: 5 lumens; 15 days run-time; 10 m beam range
The above data is measured indoors under 25°C in windless laboratory conditions. The data may vary due to environmental and heat dissipation conditions.
Please note:
*The turbo setting after 3 minutes run-time will decrease to 600 lumens to protect the LED from overheating.
** The high setting after 110 minutes run-time will decrease to 600 lumens to protect the LED from overheating.
Technical Details
Type: Rechargeable hand LED torch
Operating Modes: Moonlight / Low / Mid / High / Turbo / Strobe
Luminous Flux: Up to 3000 lumens
Lamp Type: Osram cool white LED x 3
Reflector System: Smooth reflector
Beam Range: Up to 220 m
Batteries Required: customised 21700 5000 mAh lithium-ion rechargeable (included)
Run Time: Up to 72 hours on low
Overall Length: 126 mm
Head Diameter: 35 mm
Taill Diameter: 27.5 mm
Weight: 185 grams (including battery)
Body Colour: Black
Body Material: Constructed from aerospace grade aluminium alloy
Body Finish: Type III hard anodised
Switch Type: Single side push-button switch
Impact Resistance: 1.5 m
Environmental: Waterproof to IPX8 standard (2 m)
Warranty: 5 years
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in retail packaging and includes:
Olight Seeker 2 rechargeable LED torch x 1
Olight customised 21700 5000 mAh Li-ion battery x 1
MCC1A magnetic USB charging cable x 1
Lanyard x 1
Manual x 1
