Olight Seeker 2 Pro Rechargeable LED Torch

The Olight Seeker 2 Pro is a high output rechargeable LED torch that is the successor to the R50 Seeker series and now is even more compact and slimline but still punches the same power of a staggering 3200 lumens output on the highest setting. To prevent overheating the Seeker 2 Pro will maintain the turbo brightness for 2 minutes before dropping down to 600 lumens to protect the LED.

Featuring three Cree XP-L HD CW LEDs, the Seeker 2 Pro combines this with a smooth reflector to provide a balanced beam profile with a central hotspot surrounded by spill light, offering a maximum range of 250 metres. The body of the torch features milled fingers groves with a dermatoglyphic silicone surface to provide a comfortable and non slip grip.

The multi-function side-switch turns the torch on and off with each press and cycles through the brightness modes of low, mid and high when you hold down the button with the light on. For turbo access you double click the button and a triple click enters strobe. Moonlight mode can be accessed by holding the button down while the light is off.

When the light is turned on the indicator switches either side of the button will illuminate. The indicators up the left hand side are to show the mode you are in with the first one for moonlight or low, the second one for mid, the third one for high and the fourth one for turbo. The indicators up the right hand side are battery level indicators and the bottom fist one shows 10-25% power, the second one is 25-50% power, the third one is 50-75% power and the fourth one is above 75% power.

The Seeker 2 Pro features a lock-out function, so you don't have to worry about accidentally activating the light in your pocket or bag. A built in memory function automatically returns to your last brightness level from the off position (turbo will be memorised as high mode and the strobe cannot be memorised).

It is powered using the included Olight 21700 5000 mAh customised lithium-ion battery, which is recharged inside the torch using the included magnetic charging cable. Simply connect the magnet to the base of the Seeker 2 Pro and plug the USB end into a computer or the mains using the included USB adaptor. The indicator light on the magnet will go red while charging is in progress and turn green once charging is complete.

The Seeker 2 Pro can also be charged with the included Olight L Dock charging station which can be wall mounted. Simply attach the base of the torch to the L dock magnetically and then the magnetic charger cable attaches to the top of the L Dock and plugs in as before.

As the Seeker 2 Pro can be wall mounted the MCC1AL magnetic charging cable is longer to accommodate this, measuring 3.9 ft in total. To keep the cable together when not in use two cable tidies are included and feature an adhesive bottom to keep them in place.

Two timer settings are on the Seeker 2 Pro; long timer (9 minutes) and short timer (3 minutes). Double click and hold the side switch while the light is on to enter this setting. One blink indicates the 3 minutes mode, and two blinks indicates the 9 minutes mode.

Product Features

Lock-out function to prevent accidental activation
Memory function remembers last mode used
Milled finger grooves for a comfortable feel in the hand
Mode and battery status indicators

Operational Modes

​Turbo: 3200 lumens; 2 minutes run-time, 600 lumens; 2 hour, 30 minutes run-time; 250 m beam range*
High: 1200 lumens: 1 hour, 50 minutes run-time, 600 lumens; 30 minutes run-time; 150 m beam range**
Mid: 300 lumens; 9 hours, 30 minutes run-time; 70 m beam range
Low: 50 lumens; 52 hours run-time; 30 m beam range
Moon: 5 lumens; 12 days run-time; 10 m beam range

The above data is measured indoors under 25°C in windless laboratory conditions. The data may vary due to environmental and heat dissipation conditions.

Please note:
*The turbo setting after 2 minutes run-time will decrease to 600 lumens to protect the LED from overheating.
** The high setting after 110 minutes run-time will decrease to 600 lumens to protect the LED from overheating.

Technical Details

Type: Rechargeable hand LED torch
Operating Modes: Moonlight / Low / Mid / High / Turbo / Strobe (13 Hz)
Luminous Flux: Up to 3200 lumens
Lamp Type: Cree XP-L HD CW LED x 3
Reflector System: Smooth reflector
Beam Range: Up to 250 m
Batteries Required: customised 21700 5000 mAh lithium-ion rechargeable (included)
Run Time: Up to 52 hours on low
Overall Length: 128 mm
Head Diameter: 35 mm
Taill Diameter: 29.6 mm
Weight: 198 grams (including battery)
Body Colour: Black
Body Material: Constructed from aerospace grade aluminium alloy
Body Finish: Type III hard anodised
Switch Type: Single side push-button switch
Impact Resistance: 1.5 m
Environmental: Waterproof to IPX8 standard (2 m)
Warranty: 5 years
Regulatory Compliance: CE / RoHS

Packaging and Contents

Supplied in retail packaging and includes:
Olight Seeker 2 Pro rechargeable LED torch x 1
Olight customised 21700 5000 mAh Li-ion battery x 1
Holster x 1
Magnetic USB charging cable x 1
L Dock charging station x 1
Microfiber cleaning cloth x 1
Adhesive cable tidy x 2
Manual x 1

Be the first to Write a Review for this item!

Receive a great FREE GIFT from Torch Direct

To qualify simply spend over £75 with us, on any one order, minus any delivery fees.
You will then receive a Mercury FL05C 5 W Cree LED Torch completely FREE!