The Olight S2 Baton outputs an intensely bright beam of 950 lumens at maximum setting with its Cree XM-L2 CW LED, and has a maximum beam distance of 142 metres.
It uses two CR123A primary lithium cells or can use one 18650 rechargeable lithium-ion battery. The base of the S2 is fitted with a surprisingly powerful magnet allowing you to attach the light to any suitable metal surface.
The brightness levels are cycled through low, mid, high, turbo in turn, whilst the moonlight mode of 0.5 lumens can be accessed directly when the torch is off by pressing and holding down the switch for 1 second. Instant access to turbo mode can be achieved by a quick double press when the light is off.
When the Olight S2 is switched on a quick triple click of the on/off button activates strobe mode.
The memory function allows you to activate the light in a particular mode, as it remembers the last brightness setting used.
The S2 contains two timer settings; long timer (9 minutes) and short timer (3 minutes). Double clicking the side switch will enter this setting and one blink indicates the 3 minutes mode, and two blinks indicates the 9 minutes mode.
Double click the side switch to change the timer to the opposite setting. After the setting is saved, the light will blink 3 times and then will enter the timer mode. The light will automatically turn off when the timer is over.
Recessed silicon switch to prevent accidental activation
Removable pocket clip that is scratch resistant
Stainless steel bezel and switch ring with PVD coating
Built-in thermal management safety program
Using 2 x 3 V, 1500 mAh CR123A battery:
Turbo: 950 lumens; 2 minutes run-time, 500 lumens; 1 hour, 40 minutes run-time*
High: 400 lumens; 2 hours, 45 minutes run-time
Mid: 80 lumens; 12 hours run-time
Low: 10 lumens; 95 hours run-time
Moonlight Mode: 0.5 lumens; 35 days run-time
Strobe: 10 Hz
Using 1 x 3.6 V, 3400 mAh 18650 lithium-ion battery:
Turbo: 950 lumens; 2 minutes run-time, 500 lumens; 2 hours, 50 minutes run-time*
High: 400 lumens; 4 hours, 5 minutes run-time
Mid: 80 lumens; 19 hours run-time
Low: 10 lumens; 144 hours run-time
Moonlight Mode: 0.5 lumens; 60 days run-time
Strobe: 10 Hz
Please note: *The high setting after 2 minutes run-time will decrease to 500 lumens to protect the LED from overheating.
Important Battery and Battery Charger Information
Primary Cells - Please note that CR123A lithium metal primary battery cells are not rechargeable.
Rechargeable Cells - If you are intending to use lithium-ion rechargeable batteries then you will also need to purchase a suitable battery charger if you do not already have one.
Please click on the Product Accessories tab above to view compatible batteries and battery chargers.
Type: Professional hand-held LED torch
Operating Modes: Moonlight / Low / Mid / High / Turbo / Strobe (10 Hz)
Luminous Flux: Up to 950 lumens
Lamp Type: Cree XM-L2 LED
Lens: Aluminium Smooth reflector
Beam Range: 142 m
Batteries Required: 2 x CR123A Lithium / 1 x 18650 Li-ion
Run Time: Up to 35 days at lowest setting
Overall Length: 103 mm
Diameter: 23 mm
Weight: 50.5 grams (excluding battery)
Body Colour: Black
Body Material: Constructed from aircraft-grade aluminium
Body Finish: Type III hard-anodised with anti-scratch coating
Switch Type: Side mounted
Other Technology: Magnetic base
Impact Resistance: 1.5 m
Environmental: Waterproof to IPX8 Standard (2 m)
Warranty: 5 years
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in a retail box and contains:
Olight S2 Baton torch x 1
Lanyard x 1
Pocket clip x 1
CR123A battery magazine x 1
Manual x 1