The Olight S10R III Baton is the third generation in the extremely popular S10R series, now offering an increased output of 600 lumens on the highest setting, before dropping down to 300 lumens after 1 minute, 30 seconds to prevent the LED from overheating.
The included Olight RCR123A 650 mAh tailored lithium-ion battery is recharged inside the torch using the included magnetic Micro Dok III. Simply place the S10R III on to the magnetic base and plug the micro USB end into the charging base and the other end into a computer/laptop or suitable USB adaptor.
An LED indicator on the charging dok will turn red while charging is in progress and turn green once charging is complete. The Micro Dok is also capable of charging an external device as it has a USB output socket. The S10R III can also be charged using Olight's Magnetic Charging Cable, which can be purchased separately as a spare or for convenient use on the go.
Utilising the brand new Luminus SST-40 LED, the S10R III produces a concentrated spot beam that has a maximum beam distance of 118 metres thanks to the smooth aluminium reflector.
Featuring four brightness levels and strobe, the torch is turned on and off with the side mounted push button. Select the brightness level, with the torch turned on, by holding the switch to cycle through low, mid and high in turn. The moonlight mode of 0.5 lumens can be accessed directly when the torch is off by pressing and holding down the switch.
Quickly double pressing the switch will give direct access to high mode and three quick presses will activate the strobe mode. The memory function will remember the last mode used, which is convenient if you prefer a particular setting.
The S10R III contains two timer settings; long timer (9 minutes) and short timer (3 minutes). Double clicking the side switch will enter this setting and one blink indicates the 3 minutes mode, and two blinks indicates the 9 minutes mode.
Double click the side switch to change the timer to the opposite setting. After the setting is saved, the light will blink 3 times and then will enter the timer mode. The light will automatically turn off when the timer is over.
A handy lockout function prevents the torch from being accidentally activated and is accessed by pressing and holding the switch for 2 seconds. The S10R III also features a dual purpose magnetic tail cap, so you can use it as a hands-free work light, and attach it securely to the included charging base.
Using the included 650 mAh RCR123A lithium-ion battery:
High: 600 lumens; 1.5 minutes run-time, drops to 300 lumens; 1 hour run-time*
Mid: 120 lumens; 2 hours, 40 minutes run-time
Low: 12 lumens; 33 hours run-time
Moonlight Mode: 0.5 lumens; 15 days run-time
Strobe: 10 Hz
Please note: *The high setting after 1.5 minutes run-time will decrease to 300 lumens to protect the LED from overheating.
CR123A lithium primary battery cells are NOT rechargeable, do not attempt to recharge CR123A batteries inside the S10R III. For suitable replacements please see the related products.
Type: Professional hand-held LED torch
Operating Modes: Moonlight / Low / Mid / High / Strobe (10 Hz)
Luminous Flux: Up to 600 lumens
Lamp Type: Luminus SST-40 LED
Lens: Aluminium Smooth reflector
Beam Range: Up to 118 m
Batteries Required: 1 x tailored RCR123 Li-ion (included) or 1 x CR123A Lithium
Run Time: Up to 15 days at lowest setting
Overall Length: 68.5 mm
Diameter: 23 mm
Weight: 58 grams (including battery)
Body Colour: Black
Body Material: Constructed from 6061-T6 aluminium alloy
Body Finish: Type III hard-anodised
Switch Type: Side mounted
Other Technology: Magnetic base
Impact Resistance: 1.5 m
Environmental: Waterproof to IPX8 Standard (2 m)
Warranty: 5 years
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in retail packaging and contains:
Olight S10R III Baton torch x 1
Lanyard x 1
Stainless steel pocket clip x 1
Olight tailored RCR123A 650 mAh lithium-ion battery x 1
Micro Dok III x 1 (with micro USB cable)
Manual x 1