The Olight Perun is a high power LED head torch that utilises a high performance White LED to emit a maximum output of 2000 lumens, which drops to 800 lumens after 2 minutes, 30 seconds use to protect the LED from overheating.
Unlike a traditional hand torch, the light does not come from end end of the torch and instead comes from the side of the torch making the Perun a versatile unit. It can easily be used in the hand, or when attached to a shirt pocket with the included clip the light is perfectly pointing outwards from the body so it can be used hands free. The TIR bead lens provides a wide, soft beam with a broad hotspot which is perfect for up close lighting and carrying out tasks in your immediate area.
The Perun can also be used as a head torch with the compatible headband (not included), which can be purchased separately and features a strong magnet so when the Perun is sat in the bracket of the headband the magnet holds in securely in place for a secure attachment and there is also a silicon strap that fastens over the torch for extra security.
Featuring an infrared sensor, the Perun will automatically dim to 30 lumens if something becomes within too close proximity and will then shut down if the obstructuon continues for more than 60 seconds. This is useful if the torch hasn't been put into lockout mode and turns on in a pocket or back pack, as it will then turn itself off if the obstruction remains too close, thus saving battery life and preventing overheating.
Another handy feature of the Perun is the low battery warning that causes the torch to vibrate once every 30 seconds when the battery power level drops below 10%, unless the torch is in moonlight mode.
It is powered using the included Olight 18650 3500 mAh tailored lithium-ion battery, which is recharged inside the torch using the included MCC3 magnetic charging cable that offers faster charging speed thanks to the 2 A output capability. Simply connect the magnet to the base of the Perun and plug the USB end into a computer or the mains using a suitable USB adaptor (2 A recommended for fastest charging). The indicator light on the magnet will go red while charging is in progress and turn green once charging is complete after approximately 3 hours, 30 minutes if the power supply is sufficient enough to support the 2 A output, otherwise the cable will output at a lower rate or 1 A or 1.5 A depending on the power supply.
Featuring five brightness levels and SOS, the torch is turned on and off with the push button that is located on the top of the torch. Select the brightness level with the torch turned on by holding the switch to cycle through moonlight, low, mid and high in turn, whilst a quick double click will access and exit turbo. The moonlight mode of 2 lumens can be accessed directly when the torch is off by pressing and holding down the switch. SOS is activated by three quick presses of the switch.
A handy lockout function prevents the torch from being accidentally activated and is accessed by pressing and holding the switch for 2 seconds.
TIR bead lens delivers a balanced, soft beam for close-range illumination
Pocket clip for easy carrying and hands free use
Thermal management programme to prevent overheating
Mode memory function
Low profile silicone switch that is angled for comfortable operation
Low battery indicator to notify you of low power
Turbo: 2000 lumens; 2 minutes, 30 seconds run-time / 800 lumens; 2 hours, 40 minutes run-time*
High: 500 lumens; 3 hours run-time / 220 lumens; 1 hour run-time
Mid: 120 lumens; 15 hours run-time
Low: 30 lumens; 47 hours, 30 minutes run-time
Moonlight: 5 lumens; 10 days run-time
*The turbo setting will decrease to 40% (800 lumens) after 2.5 minutes to protect the LED from overheating.
** The high setting will decrease to 44% (220 lumens) after 3 hours to protect the LED.
The above results are based on ANSI/NEMA FL1-2009 standard and are tested using the included battery.
Type: Versatile LED torch
Operating Modes: Turbo / High / Mid / Low / Moonlight / SOS
Luminous Flux: Up to 2000 lumens
Lamp Type: 1 x High performance white LED
Beam Range: Up to 120 m
Batteries Required: 1 x 18650 tailored lithium-ion
Run Time: Up to 47 hours, 30 minutes on low
Overall Length: 112 mm
Head Diameter: 26 mm
Body Diameter: 23 mm
Weight: 120 grams (including battery)
Body Colour: Black
Body Material: AL6061-T6 aluminium alloy
Switch Type: Push button
Impact Resistance: 1.5 m
Environmental: Waterproof to IPX8 standard
Warranty: 5 years
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in retail packaging and contains:
Olight Perun LED torch x 1
Olight tailored 18650 3500 mAh lithium-ion battery x 1
MCC3 magnetic charging cable x 1
Pocket clip x 1
Lanyard x 1
Manual x 1