Olight Odin Turbo Rechargeable LED Weapon Mountable Torch
Olight Odin Turbo Rechargeable LED Weapon Mountable TorchOlight Odin Turbo Rechargeable LED Weapon Mountable TorchOlight Odin Turbo Rechargeable LED Weapon Mountable Torch
Olight Odin Turbo Rechargeable LED Weapon Mountable TorchOlight Odin Turbo Rechargeable LED Weapon Mountable TorchOlight Odin Turbo Rechargeable LED Weapon Mountable Torch

Olight Odin Turbo Rechargeable LED Weapon Mountable Torch

Brand:  Olight
Product Code:  OL1051-T


8 in stock
max allowance of 20 characters
Save £10.00 (RRP £249.95)

The Odin Turbo is Olight's first LEP (Laser Excited Phosphor) torch, which uses a laser instead of an LED as it's light source. It meets the Class 1 standards for an eye-safe LEP light, delivering a much more even, concentrated and steady output than LED lights.

Thanks to this new LEP design it is capable of 1050 metres beam range with hardly any spill light, when used on the highest output of 330 lumens, making it easy to penetrate smoke and fog. This extremely sharp and precise beam makes it the perfect gun mountable light for hunting, positioning, and tactical use.

A maximum output of 330 lumens is possible on high, which drops to 180 lumens after 30 minutes use, then drops again after 2 hours, 30 minutes to 90 lumens and will then run for a further 30 minutes.

Professionally designed for PICATINNY mounts, the Odin Turbo features an innovative removable slide rail mount with a mechanical lock for secure operation. The mount also features two slots allowing the torch to be attached to the mount either on the side or on the top, providing versatile position for weapon mounting. To attach the mount to the picatinny rail, the mount needs to be opened up by loosening the screws with the included tool. Once loosened it can be positioned wherever you want it on your rail and the screws can then be tightened up followed by twisting the mechanical lock to ensure both mount and torch are secure.

It connects to the included remote pressure switch magnetically, rather than having to unscrew the tail cap and replace it, which makes it much more efficient. Once the pressure switch is magnetically connected, the ring can then be pushed down to lock it to the torch for extra security. The pressure pad can also be mounted on the rail as it is set in it's own rail mountable holder. A quick press of the pressure switch will access constant on/off, while press and hold will access the momentary operation.

And if all that wasn't enough already, the Odin Turbo features the innovative low battery level warning function in the form of a subtle vibration within the torch, rather than an indicator light, making it much more stealthy.

The low power vibration feature will notify you at the following power levels:
Power ≤20% - vibrate once every 5 minutes
Power ≤10% - vibrate once per minute
Power ≤5% - vibrate once every 10 seconds

The included 21700 customised lithium-ion battery with a capacity of 5000 mAh is recharged inside the torch using the included MCC3 magnetic charging cable. This new design charging cable charges the battery faster all thanks to the 2 A output capability of the MMC3 cable (only this cable can be used with the Odin Turbo).

Simply connect the magnet to the base of the Odin Turbo and plug the USB end into a computer or the mains using a suitable USB adaptor (5 V 2 A recommended for fastest charging). The indicator light on the magnet will go red while charging is in progress and turn green once charging is complete after approximately 5 hours, 30 minutes if the power supply is sufficient enough to support the 2 A output, otherwise the cable will output at a lower rate or 1 A or 1.5 A depending on the power supply.

The tactical tail switch provides strong magnetism and allows for easy operation while wearing gloves and due to the raised button, but without compromising accidental activation thanks to the three raised struts that not only preventing it easily turning on but also allow for tail stand capability. The tail switch will access constant low with a quick half press, or momentary low with a half press and hold. Constant high is accessed with a quick deep press or momentary high is activated with a deep press and hold. Single press the button again to turn the torch off.

Two small zip ties are included for cable management of the remote switch to ensure that the wire is secure and won't get in your way.

Product Features

LEP light source
Metal tail switch that won't wear down like a rubber switch
Innovative picatinny mounting system
Magnetic remote pressure switch included
Magnetic tail cap charging
Faster 2 A charging and larger capacity 21700 battery

Operational Modes

330 lumens; 30 minutes run-time; 1050 m beam range*
180 lumens; 2 hours, 30 minutes run-time
90 lumens; 30 minutes run-time

90 lumens; 7 hours, 30 minutes run-time; 600 m beam range

Tested using the included battery. Results may vary between torch, environment and usage.

Please note: *The high setting will continue to decrease under continuous use to protect the LED from overheating

Technical Details

Type: Tactical weapon torch
Operating Modes: Low / High
Luminous Flux: Up to 330 lumens
Lamp Type: High Performance LEP (4500~5000K)
LEP Output: <0.39 mW @ 440~455 nm wavelength
Lens: Protective glass lens
Beam Range: Up to 1050 m
Batteries Required: Olight customised 5000 mAh 21700 lithium-ion
Overall Length: 155 mm
Head Diameter: 31 mm
Barrel Diameter: 27 mm
Weight: 249 grams (including battery)
Body Colour: Black
Body Material: Aluminium alloy
Body Finish: Type III hard anodised
Switch Type: Tail cap push button
Impact Resistance: 1.5 m
Environmental: Waterproof to IPX8 standard (2 m)
Warranty: 5 years (torch), 1 year (battery)
Regulatory Compliance: CE / RoHS

Packaging and Contents

Supplied in a retail packaging and includes:
Olight Odin Turbo LED torch (with mount attached) x 1
Olight customised 5000 mAh 21700 lithium-ion battery x 1
MCC3 USB magnetic charging cable x 1
Magnetic remote pressure switch x 1
Allen wrench x 1
Adjustable screw x 2
Cable zip tie x 2
Manual x 1

Olight Customised 21700 5000 mAh 3.6 V Lithium-ion Battery

Olight Customised 21700 5000 mAh 3.6 V Lithium-ion Battery

This Olight customised battery is compatible with the Olight Freyr, Seeker 2, Seeker 2 Pro, Warrior X Pro, Warrior X Turbo & M2R Pro Warrior only.

Out of Stock

Due to shipping regulations this battery can only be shipped to the Mainland UK, unless it is sent with a compatible torch or battery charger.

[More details]

Compact USB Charger (2100 mA Output)

Compact USB Charger (2100 mA Output)

15 in stock

This compact USB charger has a power output of 2100 mA, making it ideal for charging many devices that charge via a USB port.

[More details]
£5.95Add to Basket

Olight Omino Magnetic 4 Port Charging Dock

Olight Omino Magnetic 4 Port Charging Dock

Compatible with Olight torches that can charge via MCC1A & MCC3 magnetic cables.

10 in stock

The Olight Omino magnetic charging base has four charging ports and is designed to charge a a wide range of Olight torches that are compatible with the newer MCC1 and MCC3 charging cables.

[More details]
£45.95Add to Basket

Be the first to Write a Review for this item!

Receive a great FREE GIFT from Torch Direct

To qualify simply spend over £50 with us, on any one order, minus any delivery fees.
You will then receive a Mercury FL05C 5 W Cree LED Torch completely FREE!

Free gift offer from Torch Direct Ltd

Make it personal with our laser engraving service!

We charge £3.95 per engraving and all you have to do to obtain this service is complete the text form above with the text that you wish to be laser engraved. The text box is located just above the add to basket button, do this before adding your chosen product to your shopping basket.

You can chose to engrave a name, slogan or any text you want.

We are able to reproduce lowercase, uppercase, numbers and punctuation marks, and you may use a maximum of 20 characters per item. Please take great care when typing your chosen text as our system will capture, process, and replicate exactly what has been typed by you. Mistakes cannot be corrected after the engraving has been completed and refunds or exchanges will not be offered.

How do we engrave your product?

We use a top quality fibre laser engraving machine, which provides an accurate beam of laser light to mark your product perfectly and permanently.

Which typeface do we use for engraving and what size is it?

We use a typeface called 'Arial' for all our engraving as we find it gives the best results overall. Depending on which product is being engraved, our machine operators will adjust the text size to fit any available space.

Some samples from our engraving gallery (click to zoom)

If you would like to see more examples then please visit our Engraving Service page.