The Odin is a new breed of tactical light, offering Olight's exquisite design with a clever mounting system combined with some of the much loved features of the Warrior X Pro such as the vibration battery indicator, metal silent switch, large capacity battery and magnetic charging.
Utilising a neutral white LED, the Odin has a maximum output of 2000 lumens on turbo, which drops to 1000 lumens after 2 minutes use, drops again after 9 minutes to 760 lumens and will run for 2 hours, 5 minutes before dropping a final time to 300 lumens for which it will then run for 24 minutes.
Professionally designed for PICATINNY mounts, the Odin features an innovative removable slide rail mount with a mechanical lock for secure operation. The mount also features two slots allowing the torch to be attached to the mount either on the side or on the top, providing versatile position for weapon mounting. To attach the mount to the picatinny rail, the mount needs to be opened up by loosening the screws with the included tool. Once loosened it can be positioned wherever you want it on your rail and the screws can then be tightened up followed by twisting the mechanical lock to ensure both mount and torch are secure.
It connects to the included remote pressure switch magnetically, rather than having to unscrew the tail cap and replace it, which makes it much more efficient. Once the pressure switch is magnetically connected, the ring can then be pushed down to lock it to the torch for extra security. The pressure pad can also be mounted on the rail as it is set in it's own rail mountable holder. A quick press of the pressure switch will access constant on/off, while press and hold will access the momentary operation.
And if all that wasn't enough already, the Odin features the innovative low battery level warning function in the form of a subtle vibration within the torch, rather than an indicator light, making it much more stealthy.
The low power vibration feature will notify you at the following power levels:
Power ≤20% - vibrate once every 5 minutes
Power ≤10% - vibrate once per minute
Power ≤5% - vibrate once every 10 seconds
The included 21700 customised lithium-ion battery with a capacity of 5000 mAh is recharged inside the torch using the included MCC3 magnetic charging cable. This new design charging cable charges the battery faster all thanks to the 2 A output capability of the MMC3 cable (only this cable can be used with the Odin).
Simply connect the magnet to the base of the Odin and plug the USB end into a computer or the mains using a suitable USB adaptor (5 V 2 A recommended for fastest charging). The indicator light on the magnet will go red while charging is in progress and turn green once charging is complete after approximately 5 hours, 30 minutes if the power supply is sufficient enough to support the 2 A output, otherwise the cable will output at a lower rate or 1 A or 1.5 A depending on the power supply.
The tactical tail switch provides strong magnetism and allows for easy operation while wearing gloves and due to the raised button, but without compromising accidental activation thanks to the three raised struts that not only preventing it easily turning on but also allow for tail stand capability. The tail switch will access constant low with a quick half press, or momentary low with a half press and hold. Constant high is accessed with a quick deep press or momentary high is activated with a deep press and hold. Single press the button again to turn the torch off.
Two small zip ties are included for cable management of the remote switch to ensure that the wire is secure and won't get in your way.
Product Features
Heavy duty build
Metal tail switch that won't wear down like a rubber switch
Innovative picatinny mounting system
Magnetic remote pressure switch included
Magnetic tail cap charging
Faster 2 A charging and larger capacity 21700 battery
Operational Modes
High:
2000 lumens; 2 minutes run-time; 300 m beam range*
1000 lumens; 9 minutes run-time
760 lumens; 2 hours, 5 minutes run-time
300 lumens; 24 minutes run-time
Low:
300 lumens; 8 hours run-time; 118 m beam range
Tested using the included battery. Results may vary between torch, environment and usage.
Please note: *The high setting will continue to decrease under continuous use to protect the LED from overheating
Technical Details
Type: Tactical weapon torch
Operating Modes: Low / High
Luminous Flux: Up to 2000 lumens
Lamp Type: Neutral White LED
Lens: PMMA optical lens
Beam Range: Up to 300 m
Batteries Required: Olight customised 5000 mAh 21700 lithium-ion
Overall Length: 136.5 mm
Head Diameter: 29 mm
Barrel Diameter: 26.6 mm
Weight: 216 grams (including battery)
Body Colour: Black
Body Material: Aluminium alloy
Body Finish: Type III hard anodised
Switch Type: Tail cap push button
Impact Resistance: 1.5 m
Environmental: Waterproof to IPX8 standard (2 m)
Warranty: 5 years (torch), 1 year (battery)
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in a retail packaging and includes:
Olight Odin LED torch (with mount attached) x 1
Olight customised 5000 mAh 21700 lithium-ion battery x 1
MCC3 USB magnetic charging cable x 1
Magnetic remote pressure switch x 1
H2.5 allen wrench x 1
Adjustable screw x 2
Cable zip tie x 2
Manual x 1