Olight Javelot Turbo Rechargeable LED Torch
Olight Javelot Turbo Rechargeable LED TorchOlight Javelot Turbo Rechargeable LED TorchOlight Javelot Turbo Rechargeable LED Torch
Olight Javelot Turbo Rechargeable LED TorchOlight Javelot Turbo Rechargeable LED TorchOlight Javelot Turbo Rechargeable LED Torch

Olight Javelot Turbo Rechargeable LED Torch

Brand:  Olight
Product Code:  OL1075

Availability:  

19 in stock
 
max allowance of 20 characters
£229.95

The Olight Javelot Turbo is a high output rechargeable LED torch that is the successor to the Javelot Pro and while it offers a slightly lower output of 1300 lumens on the turbo setting, it boasts a longer beam range of 1300 metres and a larger battery pack.

To prevent overheating the Javelot Turbo will maintain the turbo brightness for 10 minutes before dropping down to 1000 lumens to protect the LED, and will again drop in intervals.

Featuring a high performance NW LED, the Javelot Turbo combines this with a smooth reflector fitted into a large diameter head to provide a balanced beam profile with a tight central long distance hotspot surrounded by spill light, offering a maximum range of 1300 metres. The body of the torch features an aggressive knurling design to ensure a good non slip grip, yet is still comfortable to hold due to the slim build.

The body itself is the battery pack which is made up of two 5000 mAh 21700 lithium-ion batteries, and it is integrated into the body design, but the tail cap and head can still be removed for maintenance and replacement. The torch comes isolated with a small disc between the battery pack and head that needs to be removed upon first use.

Charging the battery pack is done via the tail switch using the included MCC1 magnetic charging cable. Simply connect the magnet to the tail of the Javelot Turbo and plug the USB end into a suitable USB power source, such as a mains USB adaptor. The indicator light on the magnet will go red while charging is in progress and turn green once charging is complete after approximately 10 hours when using a USB output of 5 V 2 A.

Two versatile switches give you multiple options for accessing the four brightness levels. The side switch operates all the outputs and turns the torch on and off by holding down the button, then once on, single presses will cycle through in the order of low, mid, high and turbo. The last used brightness setting will be remembered next time you turn the torch on if it was turned off using the side switch.

The tactical tail switch design has been upgraded to that the same design as the odin, to provide a low profile switch that sits between three struts to prevent accidental activation, and gives access to both low and turbo modes either for constant or momentary output. A quick half press of the tail switch will access constant low, while a quick full press will access constant turbo. Repeat to turn the light off again or hold down the side button. For momentary operation, half press and hold for low output or full press and hold for turbo output and when the button is released the torch will turn off.

A useful battery level indicator is built into the centre of the side switch and will light up when the torch is turned on or when the side switch is pressed with the light off. Green light indicates more than 60% power, orange light indicates 100-60% power left, red light indicates 5-10% power and when less than 5% power is remaining the light will flash red to indicate that the battery should be charged as soon as possible.

A nylon holster with a magnetic flap closure is included to protect your torch when not in use, and features a belt loop for easy carry.

Product Features

Versatile side and tail switch operation
Magnetic USB charging
Memory function remembers last mode used with side switch
Knurling design for firm grip
Battery status indicator
Larger capacity battery pack

Operational Modes

​Turbo:
1300 lumens; 10 minutes run-time; 1300 m beam range*
800 lumens; 2 hour, 20 minutes run-time
500 lumens; 30 minutes run-time
150 lumens; 1 hour, 50 minutes run-time

High:
500 lumens; 5 hours, 50 minutes run-time
100 lumens; 2 hours, 10 minutes run-time

Mid: 150 lumens; 27 hours run-time
Low: 15 lumens; 318 hours run-time

The above data is tested to ANSI/NEMA FL1 standards and measured indoors in laboratory conditions. The data may vary due to environmental and heat dissipation conditions.

Please note:
*The turbo & high setting will reduce output in intervals to protect the LED from overheating.


Technical Details

Type: Rechargeable hand LED torch
Operating Modes: Low / Mid / High / Turbo
Luminous Flux: Up to 1300 lumens
Lamp Type: High performance neutral white LED
Reflector System: Smooth reflector
Beam Range: Up to 1300 m
Batteries Required: Lithium-ion battery pack (included)
Overall Length: 259 mm
Head Diameter: 63 mm
Body Diameter: 25.8 mm
Weight: 408 grams (including battery pack)
Body Colour: Black
Body Material: Constructed from AL6061 T6 aluminium alloy
Body Finish: Type III hard anodised
Switch Type: Side push-button and tactical tail switch
Impact Resistance: 1 m
Environmental: Waterproof to IPX8 standard (2 m)
Warranty: 5 years (torch only)
Regulatory Compliance: CE / RoHS


Packaging and Contents

Supplied in a hard black carry case and includes:
Olight Javelot Turbo rechargeable LED torch x 1
MCC1 magnetic USB charging cable x 1
Nylon holster x 1
Manual x 1

Compact USB Charger (2100 mA Output)

Compact USB Charger (2100 mA Output)

15 in stock

This compact USB charger has a power output of 2100 mA, making it ideal for charging many devices that charge via a USB port.

[More details]
£5.95Add to Basket

Olight Filter for Javelot Pro, M2X-UT & M3XS-UT

Olight Filter for Javelot Pro, M2X-UT & M3XS-UT

Green, blue and white filter for Javelot Pro, M2X-UT, M3X, M3XS-UT, SR51, SR52, SR52-UT

7 in stock

Please Note: The red and green filter has now sold out and is discontinued

A range of coloured filters from Olight to fit the Javelot Pro, M2X-UT, M3X, M3X-UT, SR51, SR52 or SR52-UT LED torch. Please read full product description to view the properties of each filters and select from the options.

[More details]
£6.50RRP: £12.95Add to Basket

Olight X-WM03 Magnetic Gun Mount

Olight X-WM03 Magnetic Gun Mount

For Olight models M20SX, M2X-UT, M3XS-UT, M23, Javelot Pro and Warrior X

8 in stock

The Olight X-WM03 magnetic gun mount is an upgraded version of the X-WM02 and can easily be assembled and disassembled without any tools.

[More details]
£19.95RRP: £21.95Add to Basket

Olight MCC1A USB Magnetic Charging Cable

Olight MCC1A USB Magnetic Charging Cable

Compatible with Olight S1R, S1R II, S2R, S2R II, S10R III, S30R III, H1R, H2R, M2R, Seeker 2, Seeker 2 Pro, PL-PRO Valkyrie & Warrior X

24 in stock

The Olight USB MCC1A serves as a spare or replacement charging cable for the Olight S1R, S1R II, S2R, S2R II, S10R III, S30R III, H1R, H2R, M2R, Seeker 2, Seeker Pro 2, PL-PRO Valkyrie & Warrior X.

[More details]
£10.95Add to Basket

Be the first to Write a Review for this item!

Receive a great FREE GIFT from Torch Direct

To qualify simply spend over £50 with us, on any one order, minus any delivery fees.
You will then receive a Mercury FL05C 5 W Cree LED Torch completely FREE!

Free gift offer from Torch Direct Ltd

Make it personal with our laser engraving service!

We charge £3.95 per engraving and all you have to do to obtain this service is complete the text form above with the text that you wish to be laser engraved. The text box is located just above the add to basket button, do this before adding your chosen product to your shopping basket.

You can chose to engrave a name, slogan or any text you want.

We are able to reproduce lowercase, uppercase, numbers and punctuation marks, and you may use a maximum of 20 characters per item. Please take great care when typing your chosen text as our system will capture, process, and replicate exactly what has been typed by you. Mistakes cannot be corrected after the engraving has been completed and refunds or exchanges will not be offered.

How do we engrave your product?

We use a top quality fibre laser engraving machine, which provides an accurate beam of laser light to mark your product perfectly and permanently.

Which typeface do we use for engraving and what size is it?

We use a typeface called 'Arial' for all our engraving as we find it gives the best results overall. Depending on which product is being engraved, our machine operators will adjust the text size to fit any available space.

Some samples from our engraving gallery (click to zoom)

If you would like to see more examples then please visit our Engraving Service page.