The Olight Javelot Pro is a high output rechargeable LED torch that is the successor to the M3XS-UT Javelot and while it still offers an amazing reach, it now boasts a higher output of 2100 lumens on the turbo setting. To prevent overheating the Javelot Pro will maintain the turbo brightness for 10 minutes before dropping down to 1000 lumens to protect the LED.
Featuring a Cree XHP35 HI NW LED, the Javelot Pro combines this with a smooth reflector fitted into a large diameter head to provide a balanced beam profile with a central long distance hotspot surrounded by spill light, offering a maximum range of 1080 metres. The body of the torch features an aggressive knurling design to ensure a good non slip grip, yet is still comfortable to hold due to the slim build.
The body itself is the battery pack which is made up of two 3500 mAh 18650 lithium-ion batteries, and it is integrated into the body design, but the tail cap and head can still be removed for maintenance and replacement. The torch comes isolated with a small disc between the battery pack and tail cap that needs to be removed upon first use.
Charging the battery pack is done via the tail switch using the included magnetic charging cable. Simply connect the magnet to the tail of the Javelot Pro and plug the USB end into a computer or another USB source, such as a mains USB adaptor, with an output of at least 2 A. The indicator light on the magnet will go red while charging is in progress and turn green once charging is complete after approximately 4 hours, 30 minutes.
Two versatile switches give you multiple options for accessing the four brightness levels. The side switch operates all the outputs and turns the torch on and off by holding down the button, then once on, single presses will cycle through in the order of low, mid, high and turbo. The last used brightness setting will be remembered next time you turn the torch on if it was turned off using the side switch.
The tactical tail switch gives access to both low and turbo modes either for constant or momentary output. A quick half press of the tail switch will access constant low, while a quick full press will access constant turbo. Repeat to turn the light off again or hold down the side button. For momentary operation, half press and hold for low output or full press and hold for turbo output and when the button is released the torch will turn off.
A useful battery level indicator is built into the centre of the side switch and will light up when the torch is turned on or when the side switch is pressed with the light off. Green light indicates more than 75% power, orange light indicates 30%-75% power left, red light indicates less than 30% power and when less than 10% power is remaining the light will flash red.
Versatile side and tail switch operation
Magnetic USB charging
Memory function remembers last mode used with side switch
Knurling design for firm grip
Battery status indicator
Turbo: 2100 lumens; 10 minutes run-time, 1000 lumens; 2 hour, 10 minutes run-time; 1080 m beam range*
High: 600 lumens; 5 hours run-time; 540 m beam range**
Mid: 150 lumens; 23 hours run-time; 270 m beam range
Low: 15 lumens; 8 days run-time; 90 m beam range
The above data is tested to ANSI/NEMA FL1 standards and measured indoors in laboratory conditions. The data may vary due to environmental and heat dissipation conditions.
*The turbo setting after 10 minutes run-time will decrease to 1000 lumens to protect the LED from overheating.
Type: Rechargeable hand LED torch
Operating Modes: Low / Mid / High / Turbo
Luminous Flux: Up to 2100 lumens
Lamp Type: Cree XHP35 HI NW LED
Reflector System: Smooth reflector
Beam Range: Up to 1080 m
Batteries Required: Lithium-ion battery pack (included)
Run Time: Up to 8 days on low
Overall Length: 247 mm
Head Diameter: 63 mm
Tail Diameter: 30 mm
Weight: 380 grams (including battery pack)
Body Colour: Black
Body Material: Constructed from AL6061 T6 aluminium alloy
Body Finish: Type III hard anodised
Switch Type: Side push-button and tactical tail switch
Impact Resistance: 1 m
Environmental: Waterproof to IPX8 standard (2 m)
Warranty: 5 years (torch only)
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in a hard black carry case and includes:
Olight Javelot Pro rechargeable LED torch x 1
Magnetic USB charging cable x 1
Nylon holster x 1
Manual x 1