To commemorate their 10th anniversary, Olight have released a limited edition model that is unique and beautifully designed.
They have pulled out all the stops when they produced the ION, with a body milled from a solid block of titanium, gorilla glass front and back with a space cut out for the micro USB charging port and there are two TIR optic lenses that run parallel delivering a maximum output of 320 lumens from two Cree XP-G3 LEDs.
It is powered by the built-in lithium polymer battery, which is recharged using the provided micro USB cable. Simply insert the micro USB end of the cable into the side of the ION and then plug the other end into a computer or suitable USB adaptor. The charging indicator will go red when charging is in progress and turn green once charging is complete. The maximum charge time is 1 hour, 30 minutes.
There is a battery power indicator to let you know the battery status. A green light indicates >75% power, a yellow light indicates 15% -75% power and a red light indicates <15% power.
The two LEDs are operated with the side switch, sliding it forward to turn the light on and backwards to turn the light off. The light has four preset brightness levels of 2.5 lm, 10 lm, 40 lm and 160 lm that can be changed between with a single press of the pressure sensitive + and - sensors on the glass front control panel.
The ION is also capable of a custom output from 1 - 320 lumens. This is achieved by holding down the + or - sensor to gradually increase or decrease the brightness until you reach the desired brightness level and then releasing the sensor. In order to access the 320 lumens output you must press and hold the + sensor until it reaches the highest brightness output.
Thanks to the dual LEDs and TIR lenses the ION has a soft, balanced beam profile with a wide defined hotspot and wide angle spill light, that is capable of a beam range of up to 55 metres.
A front and back tempered glass screen protector is included to protect the glass panels from damage whilst suspended from your keys using the included key chain and connection ring.
Please Note: Due to the design of the product it is not water resistant and therefore should not be exposed to water and as the front and back are made from glass, the drop resistance is only 0.3 metres. This product is not designed for hard use.
First in the world to use a gorilla glass control panel in a 1 mm thin frame
First in the world to control output through built-in pressure sensors under a glass control panel
Charges via built in Micro-USB charging port
Remaining battery power indicator and charging status indicator
TIR optic lens used for soft and balanced close-range illumination.
ON/OFF slide power switch located on the side for quick power control
Max: 320 lumens; 27 minutes run-time; 55 m beam range
Preset 1: 160 lumens; 1 hour run-time; 40 m beam range
Preset 2: 40 lumens; 4 hours run-time; 20 m beam range
Preset 3: 10 lumens; 16 hours run-time; 10 m beam range
Preset 4: 2.5 lumens; 45 hours run-time
Min: 1 lumen; 90 hours run-time
Type: Key ring LED torch
Operating Modes: Mode 1 / Mode 2 / Mode 3 / Mode 4 / Adjustable Brightness
Luminous Flux: Up to 320 lumens
Lamp Type: 2 x Cree XP-G3
Beam Range: Up to 55 m
Batteries Required: Built-in lithium polymer battery pack
Run Time: Up to 90 hours on min
Dimensions: 58 x 27.5 x 11 mm
Weight: 32 grams
Body Colour: Black and titanium
Body Material: Titanium frame, glass front and back
Switch Type: Side switch and sensor panel
Impact Resistance: 0.3 m
Environmental: Waterproof to IPX0 standard (do not expose to water)
Warranty: 5 years
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in a black presentation box and contains:
Olight ION key ring torch x 1
Micro USB charging cable x 1
Key chain x 1
Connection split ring x 1
Tempered glass screen protector x 2
Manual x 1