Home > Olight > Hand Torches
(Details shown apply to the default selection)
This is the limited edition purple version of the S2R Baton II, only available while stocks last.
The Olight S2R Baton II is an upgraded version of the popular S2R Baton, now with a 5 mm shorter body for a more compact design and also a higher maximum output of 1150 lumens, before dropping down to 400 lumens after 2 minutes to prevent the LED from overheating.
The included Olight 18650 3200 mAh tailored lithium-ion battery is specially designed and only this battery and the 3500 mAh equivalent can be charged within the torch. The battery is recharged inside the torch using the included magnetic charging cable. Simply connect the magnet to the base of the S1R II and plug the USB end into a computer or suitable adaptor. The light on the cable will go red to show charging is in progress and turn green once charging is complete, a full charge takes approximately 4 hours and 30 minutes.
The charger cable design has been improved and the MCC now charges at a faster speed of 1 A, but it is still compatible for use with the same products that can be charged with the MCC.
A battery level indicator built into the side switch lets you know when the battery needs charging. A green light indicates above 70% power, a yellow light indicates 15% - 70 % power and a red light indicates less than 15% power and that the torch needs to be charged.
Utilising a Luminus SST-40 cool white LED and second generation TIR optic lens, the beam is pushed to a new level with unmatched clarity and produces a wide, balanced hot spot with a maximum beam distance of 135 metres.
Featuring five brightness levels and strobe, the torch is turned on and off with a single press of the side mounted push button. Select the brightness level, with the torch turned on, by holding the switch to cycle through low, mid and high in turn, whilst the moonlight mode of 0.5 lumens can be accessed directly when the torch is off by pressing and holding down the switch.
Quickly double pressing the switch will enter turbo mode and three quick presses will activate the strobe mode. The memory function will remember the last mode used for moonlight, low, mid and high. Turbo mode will be remembered as high mode.
The S2R II contains two timer settings; long timer (9 minutes) and short timer (3 minutes). Double click and hold the side switch while the light is on to enter this setting. One blink indicates the 3 minutes mode, and two blinks indicates the 9 minutes mode.
A handy lockout function prevents the torch from being accidentally activated and is accessed by pressing and holding the switch for 2 seconds to lock it and the same again will unlock it. The S2R II also features a dual purpose magnetic tail cap, so you can use it as a hands-free work light, and attach it securely to the included charging cable.
The innovative two way pocket clip makes it easy to carry the S2R II on clothing, and what's more it comes supplied with a blue one attached to the torch and a spare black one, so you can change it up as and when you like.
Turbo: 1150 lumens; 2 minutes run-time, drops to 400 lumens; 3 hours, 50 minutes run-time*High: 400 lumens; 4 hours run-time; 80 m beam rangeMid: 120 lumens; 14 hours run-time; 45 m beam rangeLow: 15 lumens; 100 hours run-time; 15 m beam rangeMoonlight Mode: 0.5 lumens; 60 days run-timeStrobe: 10 Hz
Please note: *The turbo setting after 2 minutes run-time will decrease to 400 lumens to protect the LED from overheating.
The above results are based on ANSI/NEMA FL1-2009 standard and are tested using the included battery.
Type: Professional hand-held LED torchOperating Modes: Moonlight / Low / Mid / High / Turbo / Strobe (10 Hz)Luminous Flux: Up to 1150 lumensLamp Type: Luminus SST-40 CW LEDLens: TIR reflectorBeam Range: 135 mBatteries Required: 1 x tailored 18650 lithium-ion (included)Run Time: Up to 60 days at lowest settingOverall Length: 100 mmDiameter: 23 mmWeight: 98.5 gramsBody Colour: PurpleBody Material: Constructed from 6061-T6 aluminium alloyBody Finish: Type III hard-anodisedSwitch Type: Side mountedOther Technology: Magnetic baseImpact Resistance: 1.5 mEnvironmental: Waterproof to IPX8 Standard (2 m)Warranty: 5 yearsRegulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in retail packaging and contains:Olight S2R Baton II torch x 1Stainless steel pocket clip x 2 (one blue & one black)Olight tailored 18650 3200 mAh lithium-ion battery x 1MCC 1 A magnetic charging cable x 1Lanyard x 1Pull string pouch x 1Manual x 1
Please note that the red filter has now sold out and is discontinued.
A range of coloured filters from Olight to fit the S2, S2R, S2R II, S2A, S10, all S10R models, S15, S20, M10, M18. Please read full product description to view the properties of each filters and select from the options.
The S2R Baton II is also available in the limited edition purple version, while stocks last
The Olight Omino magnetic charging base has four charging ports and is designed to charge a a wide range of Olight torches that are compatible with the newer MCC1 and MCC3 charging cables.
The Olight L Dock is a charging station designed for the Olight Seeker 2 Pro that allows the torch to be mounted to a wall. It is also compatible with other magnetic charging Olight torches such as the S1R, S1R II, S10R III, S2R, S2R II, S30R III, H1R, H2R, M2R and Warrior X.
The Olight USB MCC3 serves as a spare or replacement charging cable for the Olight S1R, S1R II, S2R, S2R II, S10R III, S30R III, H2R, M2R, M2R Pro, Seeker 2, Seeker 2 Pro, PL-PRO Valkyrie, Warrior X, Warrior X Pro, Warrior X Turbo and Baton Pro.
Due to shipping regulations this battery can only be shipped to the Mainland UK, unless it is sent with a compatible torch or battery charger.
The Olight USB MCC1A serves as a spare or replacement charging cable for the Olight S1R, S1R II, S2R, S2R II, S10R III, S30R III, H1R, H2R, M2R, Seeker 2, Seeker Pro 2, PL-PRO Valkyrie & Warrior X.
This Olight holster is designed for the Olight M2R Warrior and M2R Pro Warrior, and is also compatible with the Seeker 2 and Seeker 2 Pro.
The Olight FB-1 is a versatile bike mount which enables the fitting of a torch to your bike handlebars. The mount can hold torches with a body diameter of 10-35 mm and fits on handlebars with a diameter of 10-35 mm. Four rubber attachment ring are supplied so you can select the correct size for your torch and handlebars.
Please note: Torch not included.
This Olight black nylon holster is designed to fit the Olight S30R II, S30R III, S2, S2R, S2R II and H2R torches.
Be the first to Write a Review for this item!
Receive a great FREE GIFT from Torch Direct
To qualify simply spend over £50 with us, on any one order, minus any delivery fees.You will then receive a Mercury FL05C 5 W Cree LED Torch completely FREE!
Make it personal with our laser engraving service!
We charge £3.95 per engraving and all you have to do to obtain this service is complete the text form above with the text that you wish to be laser engraved. The text box is located just above the add to basket button, do this before adding your chosen product to your shopping basket.
You can chose to engrave a name, slogan or any text you want.
We are able to reproduce lowercase, uppercase, numbers and punctuation marks, and you may use a maximum of 20 characters per item. Please take great care when typing your chosen text as our system will capture, process, and replicate exactly what has been typed by you. Mistakes cannot be corrected after the engraving has been completed and refunds or exchanges will not be offered.
How do we engrave your product?
We use a top quality fibre laser engraving machine, which provides an accurate beam of laser light to mark your product perfectly and permanently.
Which typeface do we use for engraving and what size is it?
We use a typeface called 'Arial' for all our engraving as we find it gives the best results overall. Depending on which product is being engraved, our machine operators will adjust the text size to fit any available space.
Some samples from our engraving gallery (click to zoom)
If you would like to see more examples then please visit our Engraving Service page.
Sign up for our FREE Torch Direct newsletter and receive the latest news, product information and special offers!
Lines open from 9.00am until 5.00pm, Monday to Friday
We accept all major credit and debit cards securely
9.00am - 5.00pm, Monday to Friday
We accept all major credit and debit cards