The Olantern is Olight's first lantern and is a rechargeable unit that can be used in different ways for various situations with the interchangeable LED modules.
The main cool white module provides three brightness levels with a maximum output of 360 lumens, which is great for covering a larger close up area and the second module that can be swapped out is flame flicker mode to give you that cosy by the camp fire feeling. The transparent cover provides an even 360° light distribution, and unscrews to allow the swapping of LED modules. Please ensure the lantern is cooled before changing the LED module.
A push button on the front of the lantern controls all settings, and a single press will turn the lantern on and off. When the white LED module is fitted the button can be held down with the light on to cycle through low, mid, high and with the flaming LED module fitted the light can be turned on and off. The previously used white setting will be remembered the next time the lantern is turned on.
The Olantern is powered by four built-in rechargeable lithium-ion batteries, and what makes this lantern different to other rechargeable lanterns, is that it uses Olight's signature Magnetic charging technology. Simply connect the magnetic end of the MCC3 cable to the base of the Olantern, and plug the USB end into a suitable 2 A USB power source (higher than 8W USB recommended). The light on the cable will go red to show charging is in progress and turn green once charging is complete, after approximately 7 hours.
A motion sensor battery status indicator sits around the switch and lights up green (>70%), yellow (30-70%), red (<30%) or blinking red (<10%) when the lantern is move to notify you of the remaining battery power, and will go off after 7 seconds with no movement.
To prevent accidental activation, the Olantern has a lock out feature that can be accessed by holding down the button while the light is off. The lantern will first enter low mode before entering the lockout. If the button is pressed once in lockout, the indicator around the switch will glow red to show it is locked out. Press and hold the button again to exit the lockout.
The handy carry handle allows the lantern to be hung up and easily carried, and tucks away around the lantern for compact storage when not in use.
Operational Modes
High: 360 lumens; 6 hours, 30 minutes run-time
Mid: 120 lumens; 20 hours run-time
Low: 30 lumens; 75 hours run-time
Flickering Flame: 1 lumens; 80 hours run-time
Technical Details
Type: LED camping lantern
Operating Modes: Low / Mid / High / Flickering Flame
Luminous Flux: Up to 360 lumens
Lamp Type: LED
Batteries Required: Built-in lithium-ion battery
Height: 136 mm
Diameter: 66 mm
Weight: 347 grams
Body Colour: Basalt Grey, wine red or moss green
Switch Type: Push button
Impact Resistance: 1 m
Environmental: Water resistant to IPX4 standards
Warranty: 2 years
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in retail packaging and includes:
Olight Olantern LED lantern x 1
MCC3 magnetic USB charging cable x 1
Flaming LED module x 1
Microfibre cleaning cloth x 1
Manual x 1