The Olight R Dock is a custom built charging station designed for the Olight R50 PRO Seeker that allows the torch to be mounted to a wall or in a vehicle. Featuring a fast charging output of 3 A, the R Dock can charge the R50 Pro from 0% to 80% in 1 hour, 30 minutes.
To use the R Dock plug either the mains adaptor or car adaptor into the side of the charging station and then slide the torch onto the magnetic plate. An LED indicator shows charging status and will glow red when the torch is placed onto charge and turn yellow when charging is almost complete. Once the torch is fully charged the LED indicator will turn green.
The R Dock also has an emergency light system. When turned on with the switch on the side of the charging station it will activate the torch in low mode if the electricity cuts out while the torch is on charge i.e. if a power cut occurs. The emergency mode will not work if the torch is in lockout mode.
Two mounting plates are supplied so that the R Dock can have two separate locations for wall mounting. The R Dock clips into the mounting plate and can then be removed with the quick release leaver on the back of the dock. The mounting plates can either be permanently attached to a wall or surface using the included screws, or temporarily attached to surfaces using velcro pads.
The mounting plates feature velcro on the back of them, and included in the kit is four velcro pads with strong adhesive on the back, so you can have them in various places around the house or in the car so that the R Dock can be easily secured for charging.
Model Compatibility: R50 PRO
Input: 12 V dc, 1.5 A
Output: 12 V dc, 1.5 A
Packaging and Contents
Supplied in retail packaging and includes:
Olight R Dock charging station x 1
Mounting plate with velcro pad x 2
Adhesive velcro pad x 2
Wall plug and screw x 8
DC 12 V 1.5 A / AC 100-240 V adaptor x 1
UK mains adaptor cable x 1
DC 12 V 1.5 A car charger x 1