The Nitecore MT2A is part of the Multi-Task series of lights, which offer incredible performance from just two AA batteries.
Useful design features include a removable and reversible pocket clip, anti-roll head, forward click switch with momentary-on ability, smooth parabolic reflector for long throw and tail stand capability for use as a candle.
Powered by two AA alkaline primary cells or two AA NiMH rechargeable cells, the MT2A has four brightness levels plus strobe and SOS flashing modes.
With the head in the tightened position the light will activate in turbo mode, lowering the output after three minutes to prevent over-heating, with the head slightly loosened the light will cycle through the other three brightness levels and two flashing modes.
Turbo: 345 lumens; 2 hours, 15 minutes run-time
High: 138 lumens; 5 hours run-time
Mid: 55 lumens; 12 hours run-time
Low: 17 lumens; 50 hours run-time
Note: Accurate ANSI performance numbers indicate real world light output and run times when using two 2400 mAh AA NiMH battery cells. The data is approximate and may vary between torches, batteries and environments.
Battery Charger Information:
If you are going to use AA NiMH rechargeable batteries then you will also need to purchase a suitable battery charger if you do not already have one, please see the related product side panel to the right of the screen.
AA alkaline primary battery cells are NOT rechargeable. For suitable replacements please see the related products panel to the right of the screen.
Type: Professional hand held LED torch
Operating Modes: Turbo / High / Mid / Low / Strobe / SOS
Luminous Flux: Up to 345 lumens
Lamp Type: Cree XP-G2 R5 LED
Focus: Fixed focus
Reflector System: Smooth reflector
Beam Range: 152 m
Batteries Required: 2 x AA alkaline or 2 x AA NiMH
Run Time: Up to 50 hours
Overall Length: 155 mm
Head Diameter: 22.5 mm
Barrel Diameter: 21.5 mm
Weight: 67 grams (excluding batteries)
Colours Available: Black
Body Material: Aerospace grade aluminium alloy
Body Finish: HA III military grade hard anodised
Lens: Toughened ultra-clear mineral glass with anti-reflective coating
Switch Type: End cap push button
In-Built Technology: Intelligent memory circuit
Other Technology: Built-in advanced power management circuit
In-built Protection: Reverse polarity protection
Impact Resistance: 1.5 m
Environmental: Waterproof to IPX8 standard (2 m)
Warranty: 5 years
Packaging and Contents
Supplied in retail packaging and includes:
Nitecore MT2A LED torch x 1
Lanyard x 1
Pocket clip x 1
Spare switch boot x 1
Spare O-ring x 2
Manuals x 1
AA battery x 2 (see options above)