The Nitecore MT26 has been updated from 800 lumens to 960 lumens output and now features a Cree XM-L2 T6 LED.
Powered by either two CR123A lithium non-rechargeable cells or one 18650 lithium-ion rechargeable cell, the MT26 has four brightness levels plus strobe and SOS flashing modes.
With the head in the tightened position the light will activate in turbo mode. When the head is slightly loosened quick half pressed will cycle through high, mid, low, SOS and strobe. A full click will select the desired output in user defined mode.
Once a setting is selected, it will be remembered for next time. This is useful as you can then easily switch between turbo and you chosen output by tightening and loosening the head. For example law enforcement may want strobe as the saved setting, or for use round the house low level lighting may be suitable.
Perfect for a range of tasks and activities as you can tailor the output to your needs.
Anti roll design
Removable pocket clip
Reverse polarity protection
Intelligent memory circuit
Rhombic knurling for a better grip
Using 2 x CR123A 1550 mAh lithium metal batteries:
Turbo: 960 lumens; 1 hour, 40 minutes run-time*
High: 275 lumens; 3 hours, 50 minutes run-time
Mid: 85 lumens; 13 hours run-time
Low: 28 lumens; 31 hours run-time
Using 1 x 18650 2600 mAh lithium-ion battery:
Turbo: 960 lumens; 2 hours run-time*
High: 275 lumens; 5 hours run-time
Mid: 85 lumens; 17 hours, 30 minutes run-time
Low: 28 lumens; 45 hours run-time
Note: *The turbo output will automatically lower after 3 minutes constant operation in order to prevent the LED from overheating, therefore this is an accumulated run-time.
Measured to ANSI/NEMA FL1 standards. The data is approximate and may vary between torches, batteries and environments.
Important Battery and Battery Charger Information
Primary Cells - Please note that CR123A lithium metal primary battery cells are not rechargeable.
Rechargeable Cells - If you are intending to use lithium-ion rechargeable batteries then you will also need to purchase a suitable battery charger if you do not already have one.
Please click on the Product Accessories tab above to view compatible batteries and battery chargers.
Type: Professional hand held LED torch
Operating Modes: Turbo / High / Mid / Low / SOS / Strobe
Luminous Flux: Up to 960 lumens
Lamp Type: Cree XM-L2 T6 LED
Focus: Fixed focus
Reflector System: Smooth aluminium reflector
Beam Range: 256 m
Batteries Required: 2 x CR123A primary or 1 x 18650 lithium-ion
Run Time: Up to 45 hours on low setting
Overall Length: 149 mm
Head Diameter: 34 mm
Barrel Diameter: 25.4 mm
Weight: 133 grams (excluding batteries)
Body Colour: Black
Body Material: Aero grade aluminium alloy
Body Finish: HA III military grade hard anodized
Lens: Toughened ultra-clear mineral glass with anti-reflective coating
Switch Type: Tail cap push button and twist head
Impact Resistance: 1.5 m
Environmental: Waterproof to IPX8 standard (2 m)
Warranty: 5 years
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in retail packaging and includes:
Nitecore MT26 LED torch x 1
Holster x 1
Lanyard x 1
Pocket clip x 1
Spare switch boot x 1
Spare O-ring x 2
Tactical ring x 1
Manual x 1
Batteries (see options)