The Nitecore MH25 is part of the Multi-Task Hybrid series of lights, which feature a micro-USB charging port and this model includes a free Nitecore 18650 lithium-ion rechargeable battery cell.
Simply plug the supplied charging lead into the USB port, without the need to remove the battery, and away you go. Alternatively the MH25 can be powered by two CR123A primary lithium battery cells, which are not rechargeable.
The Cree XM-L2 LED offers a blistering 960 lumen output in turbo mode and has four brightness levels in total, plus strobe and SOS flashing modes.
With the head in the tightened position the light will activate in turbo mode and with the head slightly loosened the light will cycle through the other three brightness levels and two flashing modes, these three levels also have a memory function remembering the last mode used.
The kit includes the following main items:
MH25 LED torch, USB charging cable, NL183 Nitecore battery, NFR40 filter (Red), NFG40 filter (Green), RSW1 remote switch, Tactical ring, Lanyard, GM04 Weapon mount - 25 mm scope mount and Holster.
Intelligent charging circuit with voltage detection charges safely and rapidly
Integrated micro USB charging port is water, dust and impact resistant
Multiple output modes are conveniently accessed via rapid rotary switch
User-defined mode provides customised brightness levels
Intelligent memory function stores preferred brightness setting
Stainless steel bezel ring protects core components from damage
Stainless steel titanium-plated clip
Using two Nitecore CR123A lithium metal primary single-use batteries:
Turbo: 960 lumens; 1 hour, 30 minutes run-time*
High: 350 lumens; 3 hours run-time
Mid: 143 lumens; 7 hours, 30 minutes run-time
Low: 44 lumens; 22 hours run-time
Using one Nitecore 2600 mAh lithium-ion rechargeable battery:
Turbo: 960 lumens; 1 hour, 45 minutes run-time*
High: 350 lumens; 3 hours, 15 minutes run-time
Mid: 143 lumens; 8 hours, 30 minutes run-time
Low: 44 lumens; 28 hours run-time
Tested to ANSI standards, the data is approximate and may vary between torches, batteries and environments.
Note: *The overheat protection will automatically drop the turbo brightness level to the high brightness level after 3 minutes, therefore this is an accumulated run-time.
Important Battery and Battery Charger Information
Primary Cells - Please note that CR123A lithium metal primary battery cells are not rechargeable.
Rechargeable Cells - This torch is supplied with a lithium-ion rechargeable battery and a USB charging cable. Mains and car USB adaptors can be purchased separately.
Please click on the Product Accessories tab above to view compatible batteries and USB adaptors.
Type: Professional hand held LED torch and hunting kit
Operating Modes: 40 lumen / 130 lumen / 320 lumen / 860 lumen
Luminous Flux: From 40 to 860 lumens
Lamp Type: Cree XM-L U2 LED
Focus: Fixed focus
Reflector System: Aluminium reflector
Beam Range: 236 m
Batteries Required: 1 x 18650 lithium-ion (included)
Energy Management: High efficiency regulation circuit
Run Time: Up to 28 hours
Overall Length: 160 mm
Head Diameter: 40 mm
Barrel Diameter: 25.4 mm
Weight: 145 grams (excluding batteries)
Colours Available: Black
Body Material: Aircraft grade aluminium
Body Finish: HA III military grade hard anodised
Lens: Toughened ultra-clear mineral glass with anti-reflective coating
Switch Type: End cap push button
In-Built Technology: Intelligent memory circuit
Other Technology: Built-in advanced power management circuit
In-built Protection: Reverse polarity protection
Impact Resistance: 1.5 m
Environmental: Waterproof to IPX8 standard (2 m)
Warranty: 5 years
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in a hard plastic carry case and includes:
Nitecore MH25 LED torch x 1
Holster x 1
Lanyard x 1
Spare switch boot x 1
Pocket clip x 1
Spare O-ring x 2
NFR40 filter (Red) x 1
NFG40 filter (Green) x 1
USB charge cable x 1
Tactical ring x 1
RSW1 remote switch x 1
GM04 weapon mount - 25 mm scope mount x 1
Nitecore 18650 lithium-ion 2300 mAh rechargeable battery x 1
Manual x 1