EASTER SALE

10% discount on all orders of £50 or more

easter10

Please note that all orders placed now will leave our warehouse on Tuesday 2nd April 2024 due to the Easter holidays

Home Torches Head Torches Nitecore HC60 V2 Rechargeable LED Head Torch
Nitecore  |  SKU: HC60-V2

Nitecore HC60 V2 Rechargeable LED Head Torch

£69.90
Beam Options

The upgraded Nitecore HC60 V2 rechargeable torch now emits an output of 1200 lumens and uses an Osram P9 LED, but still retains the choice of either a cool white beam or a warm white beam.

It is designed with a wide range flood optics system to provide a wide angle beam of 100° for excellent peripheral vision, which makes it perfect outdoor activities such as hiking, climbing, camping, running and more. Additionally the head torch sits in an ergonomically designed bracket with rubber loops that hold the torch in place, allowing the light to be easily rotated and adjusted within a 180° angle.

A single switch on the front of the torch controls all the functions of the HC60 V2 and can be turned on or off with a long press of the button. Once turned on, short presses cycle through the brightness settings in the order of ultra-low, low, mid, high and turbo. The last used brightness setting will be remembered the next time the light is turned back on.

Three special modes are available and can be accessed from off by double pressing the button to enter strobe, and then each single press will cycle through strobe, SOS and location beacon modes with each press of the switch. From off you can also instantly access the ultra-low with a short press of the button, or the turbo by pressing and holding the button until it bypasses the memorised mode and enters turbo.

Supplied with the HC60 V2 is a Nitecore 3400 mAh 18650 lithium-ion battery, that is charged inside the head lamp via the upgraded USB-C charging port. Reveal the port by unscrewing the USB cover on the right side of the torch and then simply plug the included cable into the charging port and the other end into a suitable USB power source of at least 1 A. The indicator beneath the button will slowly flash while charging is in progress, and turn solid once charging is complete after approximately 5 hours when charging a 3400 mAh battery with a 1 A / 5 V power source.

A built-in battery voltage indicator under the button will display battery voltage each time the battery is installed and the end cap is tightened. For example if the voltage is 4.2 V, it will flash four times then pause and then flash two more times.

The integrated advance temperature regulation (ATR) technology regulates the output of the HC60 V2 according to the working condition and ambient environment to maintain the optimal performance.

The rugged unibody aluminium construction provides excellent cooling performance and a sturdy unit that is also lightweight, while the newly designed head band features a curved rubber pad at the back for a comfortable fit to the head and a silicone strip on the inside of the head band to channel away sweat as well as provide a non-slip fit.

Product Features

Light housing provides 180° vertical movement
Memory function remembers last used brightness level
Extremely wide angle 100° beam
Power indicator displays battery voltage to 0.1 V
Advanced temperature regulation to protect LED from overheating
Built-in USB-C charging circuit

Operational Modes

Turbo: 1200 lumens; 45 minutes run-time; 130 m beam range*
High: 450 lumens; 2 hours, 15 minutes run-time; 78 m beam range
Med: 250 lumens; 6 hours, 30 minutes run-time; 56 m beam range
Low: 40 lumens; 26 hours run-time; 28 m beam range
Ultra Low: 1 lumen; 680 hours run-time; 3 m beam range

Note: *The run-time for turbo is tested without temperature regulation active and therefore output and run-time in turbo may differ.

Tested to ANSI/PLATO FL 1-2019 standards in laboratory conditions using the included 18650 3400 mAh lithium-ion battery. The data may vary slightly in real world use depending on battery type, individual usage habits and environmental factors.


Technical Details

Type: Rechargeable LED head torch
Operating Modes: Ultra Low / Low / Mid / High / Turbo / Strobe / SOS / Location
Luminous Flux: Up to 1200 lumens
Lamp Type: 1 x Osram P9 LED
Beam Range: Up to 130 m
Beam angle: 100°
Batteries Required: 1 x button top 18650 lithium-ion rechargeable (included) / 2 x CR123A lithium metal
Measurements: 84 x 35.8 x 53.5 mm (bracket included)
Weight: 108.5 grams (excluding batteries)
Body Colour: Black
Body Material: Aircraft grade aluminium and rugged PC material
Body Finish: Type III hard anodised
Switch Type: Push button
Impact Resistance: 1 m
Environmental: Waterproof to IPX7 standard (1 m)
Warranty: 5 years (torch) / 1 year (battery)


Packaging and Contents

Supplied in retail packaging and includes:
Nitecore HC60 V2 head torch x 1
Headband and bracket x 1
Nitecore 3400 mAh lithium-ion battery x 1
USB-A to USB-C charging cable x 1
Spare O-ring x 1
Spare button cover x 1
Manual x 1


Nitecore HC60 V2 Rechargeable LED Head Torch
Nitecore

Nitecore HC60 V2 Rechargeable LED Head Torch

£69.90

The upgraded Nitecore HC60 V2 rechargeable torch now emits an output of 1200 lumens and uses an Osram P9 LED, but still retains the choice of either a cool white beam or a warm white beam.

It is designed with a wide range flood optics system to provide a wide angle beam of 100° for excellent peripheral vision, which makes it perfect outdoor activities such as hiking, climbing, camping, running and more. Additionally the head torch sits in an ergonomically designed bracket with rubber loops that hold the torch in place, allowing the light to be easily rotated and adjusted within a 180° angle.

A single switch on the front of the torch controls all the functions of the HC60 V2 and can be turned on or off with a long press of the button. Once turned on, short presses cycle through the brightness settings in the order of ultra-low, low, mid, high and turbo. The last used brightness setting will be remembered the next time the light is turned back on.

Three special modes are available and can be accessed from off by double pressing the button to enter strobe, and then each single press will cycle through strobe, SOS and location beacon modes with each press of the switch. From off you can also instantly access the ultra-low with a short press of the button, or the turbo by pressing and holding the button until it bypasses the memorised mode and enters turbo.

Supplied with the HC60 V2 is a Nitecore 3400 mAh 18650 lithium-ion battery, that is charged inside the head lamp via the upgraded USB-C charging port. Reveal the port by unscrewing the USB cover on the right side of the torch and then simply plug the included cable into the charging port and the other end into a suitable USB power source of at least 1 A. The indicator beneath the button will slowly flash while charging is in progress, and turn solid once charging is complete after approximately 5 hours when charging a 3400 mAh battery with a 1 A / 5 V power source.

A built-in battery voltage indicator under the button will display battery voltage each time the battery is installed and the end cap is tightened. For example if the voltage is 4.2 V, it will flash four times then pause and then flash two more times.

The integrated advance temperature regulation (ATR) technology regulates the output of the HC60 V2 according to the working condition and ambient environment to maintain the optimal performance.

The rugged unibody aluminium construction provides excellent cooling performance and a sturdy unit that is also lightweight, while the newly designed head band features a curved rubber pad at the back for a comfortable fit to the head and a silicone strip on the inside of the head band to channel away sweat as well as provide a non-slip fit.

Product Features

Light housing provides 180° vertical movement
Memory function remembers last used brightness level
Extremely wide angle 100° beam
Power indicator displays battery voltage to 0.1 V
Advanced temperature regulation to protect LED from overheating
Built-in USB-C charging circuit

Operational Modes

Turbo: 1200 lumens; 45 minutes run-time; 130 m beam range*
High: 450 lumens; 2 hours, 15 minutes run-time; 78 m beam range
Med: 250 lumens; 6 hours, 30 minutes run-time; 56 m beam range
Low: 40 lumens; 26 hours run-time; 28 m beam range
Ultra Low: 1 lumen; 680 hours run-time; 3 m beam range

Note: *The run-time for turbo is tested without temperature regulation active and therefore output and run-time in turbo may differ.

Tested to ANSI/PLATO FL 1-2019 standards in laboratory conditions using the included 18650 3400 mAh lithium-ion battery. The data may vary slightly in real world use depending on battery type, individual usage habits and environmental factors.


Technical Details

Type: Rechargeable LED head torch
Operating Modes: Ultra Low / Low / Mid / High / Turbo / Strobe / SOS / Location
Luminous Flux: Up to 1200 lumens
Lamp Type: 1 x Osram P9 LED
Beam Range: Up to 130 m
Beam angle: 100°
Batteries Required: 1 x button top 18650 lithium-ion rechargeable (included) / 2 x CR123A lithium metal
Measurements: 84 x 35.8 x 53.5 mm (bracket included)
Weight: 108.5 grams (excluding batteries)
Body Colour: Black
Body Material: Aircraft grade aluminium and rugged PC material
Body Finish: Type III hard anodised
Switch Type: Push button
Impact Resistance: 1 m
Environmental: Waterproof to IPX7 standard (1 m)
Warranty: 5 years (torch) / 1 year (battery)


Packaging and Contents

Supplied in retail packaging and includes:
Nitecore HC60 V2 head torch x 1
Headband and bracket x 1
Nitecore 3400 mAh lithium-ion battery x 1
USB-A to USB-C charging cable x 1
Spare O-ring x 1
Spare button cover x 1
Manual x 1

Beam Options

  • Cool White Light
  • Warm White Light
View product